PlayMakar Sport Muscle Stimulator PRO-500 User Manual

: June 8, 2024
: PlayMakar

Table of Contents

User Manual
- PlayMakar Sport Muscle Stimulator PRO-500
SPECIAL FEATURES
SYSTEM DEFAULTS & FEATURES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual

PlayMakar Sport Muscle Stimulator PRO-500

When you are familiar with the operation of this device, use the following steps in order as a quick reference to set up and operate your PRO-500 system. For more information, refer to the instruction manual.

Fully charge the battery before using this device.

FIG 1 Fully charge the battery

Connect lead wire(s) to CH1 or CH2.

$FIG 2 Connect lead wire$s$ to CH1 or CH2$

Connect 2 small or 1 XL electrode pad(s) to respective lead wire(s).

FIG 3 Connect 2 small or 1 XL electrode pad

Remove electrode pads from plastic film & place on skin per placements on pages 16 and 17 in manual.

FIG 4 Remove electrode pads from plastic film & place

Power on by pressing “ON/+” button for three (3) seconds.

FIG 5 Power on by pressing

Select EMS or TENS : Press and release “MODE” button. Press and release “ON/+” or “OFF/-” to toggle between EMS and TENS. See pages 18 and 19 in manual for mode descriptions.

FIG 6 Select EMS or TENS

To select Therapy Mode: Press and release “ON/+” or “OFF/-“ to toggle between Therapy Programs to select desired program, then press “MODE”. See pages 18 and 19 in manual for therapy program descriptions.

FIG 7 To select Therapy Mode

To select Treatment Minutes: Press and release “ON/+” or “OFF/-“ to increase or decrease treatment time between 5-60 minutes, then press “MODE”.

FIG 8 To select Treatment Minutes

To Adjust Intensity: Select the channel by pressing CH1 or CH2. The “CH1” or CH2” quadrant of the LCD will flash on the display. To increase intensity press and release “ON/+” . To decrease intensity press and release “OFF/-” until the desired intensity level flashes on the display. Press “MODE” to save your selection.

FIG 9 To Adjust Intensity

SPECIAL FEATURES

Locking Function: Press and hold “ON/+” and “OFF/-” keys simultaneously for 3 seconds to lock/unlock the device. The locking function prevents accidental setting changes.

FIG 10 Locking Function

Intensity Reset Feature: For your safety, the intensity level will default to “0” and will not increase past “1” if the device is not set up properly. Please follow the necessary steps 1-9. Be sure to have electrode pads firmly affixed to your skin.

FIG 11 Intensity Reset Feature

Intensity level reset will occur in the following instances:
• If lead wire(s), electrode pad(s) are not installed and affixed firmly to the body.
• If therapy type or program has been changed.
• After the therapy session has elapsed.

SYSTEM DEFAULTS & FEATURES

Automatic shut off: The device turns off automatically when the therapy time has elapsed or when no button is pressed for 60 seconds.
Memory: The most recently set therapy time is stored. If you change the program mode during your therapy, the previous therapy time won’t restart, unless you reset it. The last treatment program you used will appear on the display, when you turn on the device.
Press mode to save your selection. The program selected will appear the next time you turn on the device.