MINISO A127 Portable Metal Bluetooth Speaker User Manual
- June 2, 2024
- MINISO
Table of Contents
MINISO A127 Portable Metal Bluetooth Speaker
CAUTIONS
- Store and use at room temperature.
- Do not be exposed to rain or moisture.
- Do not throw the product to avoid damage caused by dropping.
- Do not disassemble, modify or repair the product yourself.
- This product is equipped with an irreplaceable built-in lithium battery. Do not discard or toss in fire to avoid danger.
- To prevent performance from being interfered with, keep it away from strong magnetic objects.
- If you are not going to use it for a long time, charge the speaker once every 3 months to extend the lifespan of the battery.
PRODUCT PARAMETERS
- Bluetooth: V5.0
- Pairing Name : MINISO-A127
- Charging Input: 5V = 500mA
- Battery Capacity: 3.7V, 500mAh
- Charging Port : Type-C
- Transmission Distance: Around 10m
- Music Playback Time: Around 4H ( 70% Volume )
- Charging Time: Around 2H
PRODUCT OVERVIEW
FUNCTIONS
- Function: Long press to turn on/off
- Turn On/Off: Short press to play/pause
- Pause/Play : Short press three times to
- Previous: move to the previous track
- Next: Short press twice to move
- Charging Indicator Light: When charging the light is constantly red, when fully charged it turns off
ACCESSORIES
- Bluetooth Speaker 1Charging Cable 1 User Manual
TROUBLESHOOTING
1. The wireless speaker is unable to be paired with the cell phone.
Solution: Confirm if the wireless speaker is in pairing mode and if the Bluetooth on your phone is toggled on. Then delete the product in the list, pair it with your phone again according to the User Manual.
2. The wireless speaker is unable to be turned on.
Solution: Confirm the battery level. Charge the speaker if it is needed.
3. Can the battery of the wireless speaker be replaced?
Solution: No, this is a lithium polymer battery, which is irreplaceable.
4. Can I use the wireless speaker at a high volume for a long time?
Solution: To extend the lifespan of the wireless speaker, it is not
recommended to play it at a high volume for a long time.
5. The link between the wireless speaker and the cell phone has been
disconnected within 10 meters.
Solution: Bluetooth is wireless so that it is very sensitive to objects
between the speaker and the connected device. Check if there are any metal or
other objects that may affect connection within the effective distance.
6. Cannot hear audio playing when the speaker is connected to the computer
or phone.
Solution : Check whether the computer’s audio output is already connected
to wireless device and whether the Bluetooth in the computer supports A2DP
protocol. Make sure the volume is up on your phone or computer.
7. Can I operate the Apps of my phone through the speaker after pairing
the wireless speaker with the phone?
Answer : Some apps may not support being operated through the speaker due
to their settings.
FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference if not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
MADE IN CHINA