Tenda AX1800 Wi-Fi 6 5G NR Router User Manual
- June 14, 2024
- Tenda
Table of Contents
Tenda AX1800 Wi-Fi 6 5G NR Router
Set up the router
- Open the SIM card cover on the bottom panel of the router.
- Insert a SIM card into the slot. Then close the cover.
- TIPS: To ensure performance and avoid damage to the SIM card, do not insert or remove the SIM card when the router is running
- Use the included power adapter to connect the power jack of the router to a power source.
- Press the button on the router to turn it on.
- All LED indicators light up and then off immediately.
- Wait a moment and then the and indicators light up in sequence when the router is connected to the internet properly.
Access the internet
- Connect your wired device, such as a computer, to the LAN port of the router using an Ethernet cable.
- Connect your wireless device, such as a smartphone, to the Wi-Fi network of the router using the Wi-Fi name and Wi-Fi key labeled on the bottom panel of the router.
- To further configure the router, log in to the web UI of the router by visiting tendawifi.com on a connected device.
Tips
- Set your login password promptly to prevent unauthorized access.
Get support and services
- Scan the Product Documents QR code to get related documents, such as the quick installation guide and video installation guide.
- The product model can be found on the label of the device.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device is for indoor use only.
Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules.
This equipment should be installed and operated with a minimum distance of
20cm between the device and your body.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. To avoid
unnecessary radiation interference, it is recommended to use a shielded RJ45
cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give their product to a competent recycling
organization or to the retailer when they buy new electrical or electronic
equipment.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Operations in the 5.15-5.25 GHz band are restricted to indoor use only.
This equipment should be installed and operated with a minimum distance of 20
cm between the device and your body.
NOTE:
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the device is in
compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the
following internet address:
https://www.tendacn.com/download/list-9.html
For EU/EFTA, this product can be used in the following countries:
Frequency Bands and Power
- Some frequency bands in which the radio equipment operates may not be available in some countries or areas. Please contact your local ISP for more details.
- The maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates is less than the highest limit value specified in the related Harmonized Standard.
- The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:
Band:
- 4G LTE Band: B1/B3/B5/B7/B8/B20/B28/B32/B38/B40/B41/B42/B43 5G NR: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78
Power:
- LTE Power: 25 dBm
- 5G SA Power: 23 dBm
- 5G NSA Power: 25 dBm
Safety Precautions
- Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents.
- The warning and danger items in other documents do not cover all the safety precautions that must be followed.
- They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.
- Do not use the device in a place where wireless devices are not allowed.
- Please use the included power adapter.
- Operating environment: Temperature: 0 C – 40 C; Humidity: (10% – 90%) RH, non-condensing;
- Storage environment: Temperature: -40 C – 70 C; Humidity: (5% – 90%) RH, non-condensing.
- Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
- Unplug this device and disconnect all cables during lightning storms or when the device is unused for long periods.
- Do not use the power adapter if its plug or cord is damaged.
- If such phenomena as smoke, abnormal sound, or smell appear when you use the device, immediately stop using it and disconnect its power supply, unplug all connected cables, and contact the after-sales service personnel.
- Disassembling or modifying the device or its accessories without authorization voids the warranty and might cause safety hazards.
Technical Support
- Shenzhen Tenda Technology Co., Ltd.
- Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
- Shenzhen, China. 518052
- USA hotline: 1-800-570-5892
- Toll Free: 7 x 24 hours
- Canada hotline: 1-888-998-8966
- Toll-Free: Mon – Fri 9 am – 6 pm PST
- Hong Kong hotline: 00852-81931998
- Global Hotline: +86 755-2765 7180 (China Time Zone)
- Website: www.tendacn.com
- E-mail: support@tenda.com.cn
Copyright
- © 2022 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
- Tenda is a registered trademark legally held by Shenzhen Tenda
- Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders.
- Specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>