Xiaomi E1 Air Purifier User Manual

: June 14, 2024
: Xiaomi

Xiaomi E1 Air Purifier

Xiaomi E1 Air Purifier

READ AND SAVE THESE INSTRUCTIONS

WARNING

When the power adapter is damaged, it must be replaced with a genuine power adapter purchased from the manufacturer or after-sales service department.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Precautions

Turn off and unplug the purifier before moving it.
The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly.
Maintain a distance of at least 20 cm between the air inlets and walls or other objects.
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth.
Remove dust, hair, and particles from the purifier’s air inlets to prevent a reduction of air intake.
Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a long time.

To avoid fire, electric shocks, or other damage, use the power adapter and electrical outlet as instructed below:

Do not excessively pull, twist or bend the power adapter, as this may expose or break the cord’s core.
The power adapter must be plugged into a suitable electrical outlet.
Use the power adapter that is provided with the purifier, do not use any third party power adapters.
Always unplug the purifier before carrying out maintenance to or moving the air purifier.
Immediately stop using the purifier when it makes unusual sounds, gives off bad odors, overheats, or its fan rotates irregularly.
Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.
Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.
Do not sit on, lean on or tilt the purifier. When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate sufficiently to avoid carbon monoxide poisoning.
Do not pour liquids, nor throw powders or other small substances into the purifier’s air outlet.

Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:

Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, multipurpose torches, candle lighters, or fire pans.
Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers,electric stoves, electric irons.
Make sure no inflammable objects get into the purifier.
In unstable locations where the purifier can easily fall over.
In environments that are extremely hot, humid, or damp, such as bathrooms

Package Contents

Read this manual carefully before use, and retain it for future reference.

Air Purifier
Standing Frame
Screw & Anchor × 2
Wall Mounting Positioning Paper
User Manual

Note: Illustrations of the product, accessories, and user interface in this user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product Overview

Display

On/Standby Button
Mode Switch Button
Mode Indicator

Level 1
Level 2
Level 3

Wi-Fi Indicator

Installation

This product has two installation methods: floor-standing and wall- mounted, and you can choose the appropriate installation method according to your needs.

Floor-standing installation

Insert the two ends of the stand frame into the holes at the bottom of the air purifier and hear a “click” to install in place.
For optimal performance, make sure the distances between purifier’s air inlets and other objects such as walls meet the requirements as suggested below.
Connecting to an electrical outlet
Note: It is recommended to keep doors and windows closed for a better purifying effect when using the purifier.

Wall-mounted installation

Please make sure the installation position on the wall for the purifier, and there must be a power outlet nearby. Clean the wall, check the accessories (2 sets of screws & anchor, 1 sheet of positioning paper), and choose the installation direction of the purifier.
Tip: The recommended installation height is about 1.4 meters (excluding the height of the purifier).
**Vertical

Horizontal
**

Lay the positioning paper on the wall, and position it according to the two crosses on the positioning paper (pay attention to the installation direction), and use a drill bit with a diameter of 6mm to drill two holes about 40mm deep on the wall.
Insert the anchor into the hole and screw in the screw slowly. Do not screw the screw all the way into the anchor, suggest leave about 7-8mm as shown.
Remove the packaging of the purifier, align the mounting holes, hang the purifier on the screw, and connect the power adapter to the power supply.

How to Use

On/Standby

Press on/standby button to turn on the purifier. When the purifier is on, press the on/standby button to enter standby mode.

Switching mode

While the purifier is on, press the mode switch button to cycle through modes.

How to Use

Resetting Wi-Fi

While the purifier is on, press and hold the mode button for 5 seconds, Wi-Fi indicator blinking, Wi-Fi is successfully reset and purifier enters the state of waiting for connection.

Enabling/Disabling Wi-F

While the purifier is on, press and hold the mode button and on/standby button simultaneously for 5 seconds, the Wi-Fi will be disabled. While Wi-Fi is off, same operation can enable the Wi-Fi.

Factory Reset

While the purifier is on, press and hold Mode button for 10 seconds, the mode indicator and Wi-Fi indicator flash three times from left to right in sequence, factory reset completed.

Linking the Device to Smartmi Link

This product has been linked to the Smartmi Link and can be controlled using the app.

Scan the QR code or search for “Smartmi Link” on the app store to download and install the app. Go to the app’s homepage, click “+” in the middle of the page, then add the device as prompted.

Note:

Please ensure that your Wi-Fi network is both available and has Internet access. Place your phone as close to this product as possible. (This product does not support 5G networks)
This product will be listed as “Smartmi Air Purifier E1” in the app’s device listing.

Intelligent Control with Apple HomeKit

Open the Home app on your iPhone/iPad.
Tap “Add Accessory” and then scan the HomeKit setup code on the product sticker (two stickers on the device unit, see illustration), or enter the eight-digit setup code above the HomeKit Setup Code. The device will then be linked to the Apple Home app.

The device can be linked to Smartmi Link after linking to HomeKit. Go to the Personal Info page on Smartmi Link. Tap “HomeKit Info” and then link the HomeKit device as prompted.

Devices linked to Smartmi Link can also be added to HomeKit. Go to the Device Control page on Smartmi Link. Tap “Add to HomeKit” in “Settings” and then link the device to HomeKit as prompted.

Intelligent Control with Apple HomeKit

Note

Please ensure that your Wi-Fi network is both available and has Internet access. Place your phone as close to this product as possible. (This product does not support 5G networks).
To control this accessory which is compatible with HomeKit, it is recommended to use iOS 13.0 or a later version.
Please keep the HomeKit setup code, as you will need to scan the code to link the device to HomeKit after a factory reset. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system.
If you need more detailed instruction, please visit: https://www.smartmiglobal.com/pages/helpcenter

Filter Replacement

Warning:

Power off purifier and disconnect it from the power supply before performing the following
operations.
When the purifier wall-mounted, it is recommended to take down the purifier before replacing the filter.

Removing the Old Filter
As illustrated in the figure, hold the purifier with one hand, and pull the edge of the filter with the other hand to remove the old filter.
Installing the New Filter
Removing the filter packaging. Insert the bottom snap of the new filter into place, and push it up to the top to fix it in place and complete the replacement.

Resetting the Filter

Power on the air purifier, press and hold the Mode button for 5 seconds to reset the service life for the new filter

Note:

It is recommended to replace the filter every 3–6 months, when it detects that the filter needs to be replaced, the device will send a prompt to your app, please replace the filter on time.
To ensure your purifier properly works and purifies, please purchase genuine and compatible filters from official channels.

How to Buy the Filter

Scan the QR Code or Visit smartmi’s online store https://www.smartmiglobal.com for more information.

Maintenance and Care

Warning: Make sure the purifier is turned off and the power adapter is unplugged before performing the following operations.

Cleaning the filter compartment

To ensure optimal ventilation and purification, use a vacuum cleaner to remove any dust from the air inlets and the filter compartment, or wipe these areas gently with a soft cloth.
After cleaning, install the filter in place.

WARNING

Do not insert fingers or foreign objects into grille.
Do not power on the purifier without filter installed.

Note: To avoid damaging the purifier, do not rinse or spray the purifier directly with water, or wipe it with a soaking wet cloth.

Specifications

Product Name Air Purifier
Product Type Air Purifier
Model ZMKQJHQE11
Rated Voltage 24V
Rated Power 19W
Item Dimensions 313.2 × 415.2 × 118.2 mm
Power Adapter Rated Input 100-240V~, 50/60Hz, 0.6A
Net Weight Approx. 2.8 kg
Clean Air Delivery Rate (CADR Particles) 150 m3 /h
TVOC’s Clean Air Delivery Rate (CADR TVOC) 28 m3 /h
Noise Level ≤ 54 dB(A)
Network Standby Power Consumption < 2.00 W
Area Efficiency 2 ACPH for an 31 m2 Room
Wireless Connectivity** Wi-Fi IEEE 802.11 b/g/n 2.4G

*Calculated according to standard GB/T 18801-2015
** ACPH: Air changes per hour, is the number of times that the total air volume in a room or space is completely removed and replaced in an hour.

RF Specification:

Wi-Fi 2.4 G (2400–2483.5 MHz), Max. RF Output Power: <20 dBm Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

Production Date: See Box
For details of the importer, please refer to the box.

Power Adapter

Information Published	Value and Precision	Unit
Manufacturer	Zhongshan Baolijin Electronic Co.Ltd.	–
Model Identifier	BLJ24W240100P- V	–
Input Voltage	100 – 240	V~
Input AC Frequency	50/ 60	Hz
Output Voltage	24.0	V⎓
Output Current	1.0	A
Output Power	24.0	W
Average Active Efficiency	86.20	%
Efficiency at Low Load (10%)	78.71	%
No-load Power Consumption	< 0.10	W

Regulatory Compliance Information

Europe — EU declaration of conformity

Hereby, Beijing Smartmi Electronic Technology Co., Ltd. declares that the radio equipment – Air Purifier, type ZMKQJHQE11 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.smartmiglobal.com/pages/doc-html

Disposal and recycling information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Logo