circa LIGHTING RL 2092 Lichfield Single Sconce Instruction Manual
- June 4, 2024
- circa LIGHTING
Table of Contents
Instruction Manual
ASSEMBLY INSTRUCTIONS
RALPH LAUREN
Lichfield Single Sconce
Item # RL 2092
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect items and contents
carefully. If any damage or defect is found, do not install it. Retain all
packaging material until installation is complete and approved.
-
Carefully remove all parts from the box.
-
Remove the mounting plate (A) from the fixture backplate (E) by loosening the side screws (D).
-
Install the mounting plate (A) onto the junction box and secure it with the mounting screws (B).
-
Wrap the fixture ground wire to the green ground screw on the mounting plate (A) and secure it, then connect to the ground wire in the junction box using the wire nut (C).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. -
Connect the fixture white wire to the neutral wire in the junction box using the wire nut (C).
-
Connect the fixture black wire to the hot wire in the junction box using the wire nut (C).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OTHERWISE, SAFETY WILL BE COMPROMISED. -
Tuck the wire connections neatly into the junction box carefully.
-
Install the fixture backplate (E) onto the mounting plate (A) and secure it with the side screws (D).
-
Remove the metal ring (G) from the fixture by loosening the screws (H).
-
Insert bulb (not included) into the socket.
-
Attach the glass shade (F) and metal ring (G) to the fixture and secure it with the screws (H).
-
Installation is complete, turn on the power at the fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>