PRINTEK FP541 Series Field Pro Mobile Printer User Guide

PRINTEK FP541 Series Field Pro Mobile Printer

This guide provides information on the daily use of the FP-541 printer. For additional information, please refer to the FP-541 User Guide.
BEFORE you begin, please visit www.printek.com Mobile Printers; Service and Support; Drivers and Software, to download the FP540 printer driver.

Printer Features

Media

Tear paper towards back of printer

NOTE: When using 3” paper, install spacer P/N: 93194

Press Paper door release button to open the paper compartment door. Pull small leader of paper out and close paper door. “Clicks” when properly closed.

Battery

Battery Disposal

Only dispose of used batteries according to your local regulations. If you do not know your local regulations, the Rechargeable Battery Recycling Corporation (RBRC) is a non-profit organization created to promote recycling of rechargeable batteries. For more information visit www.call2recycle.org

Control Panel Indicators

Power & Status (Green/Red)

|

Battery (Yellow)

|

Alert (Red)

| Indication
---|---|---|---
On| Off| On| Booting up
On| Off| Off| Ready
On| Off| Flashing| Paper Error/Lid Open
Flashing| Off| Off| Job is arriving
Flashing| Off| Off| Job is printing
Flashing| Off| Flashing| IP over USB active
Solid, Flashes Off Every 2 Seconds| Off| Off| Wireless Personal Area Network active
| Solid| | Charging Battery
| Flashing| | Battery Low
| Function| How to:
---|---|---

Power Button

| Power up
Power down
Toggle IP over
USB on/off| Press & Release
Press & Hold
Press Twice

Paper feed button

| Advance paper
Print setup
report| Press once
Press twice

Self-test / Configuration Print Out

With power on, press the paper feed button twice quickly

USB Access to Printer Web Pages

1. Turn the printer ON.

2. Connect a USB cable between the printer and a PC.

3. To access the FP-541 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.

4. When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
   a. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter – A login box should appear:
   b. Type “0000” and hit Enter- you should now be at the home page for FP-541 Configuration.

5. To return the printer to normal operating mode, double click the POWER button. The Power LED will be returned to a solid light.
   

Once the printer is connected via USB and in IP over USB mode it is temporarily not possible to access the Internet.

References

• Call2Recycle | Leading the Charge For Battery Recycling
• PRINTEK | Mobile Printers and Dot Matrix Printers
• PRINTEK | Mobile Printers and Dot Matrix Printers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>