PRINTEK FieldPro 641 Mobile Printer User Guide

: June 15, 2024
: PRINTEK

Table of Contents

PRINTEK FieldPro 641 Mobile Printer
Product Information
Product Usage Instructions
Printer features
Media
Control Panel indicators
Dual radio FP641
USB Access to Printer Web Pages
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PRINTEK FieldPro 641 Mobile Printer

Product Information

Printer Model: FieldPro 641
Quick Start Guide: Provides information on the daily use of the FP641 printer
User Guide: For additional information, refer to the FP641 UserGuide
Printer Features:
- Paper Door
- Control Panel Display
- Power Button
- Paper door release button
- Shoulder strap attachment points
- Belt loop attachment point
- Media
- Charge Port
- Battery
- USB Data Port
Battery Level Indicator: The battery icon on the display indicates the battery level
Battery Replacement: Depress the battery door clip and pull the battery out
Paper Compartment: Press the Paper door release button to open the paper compartment door. Insert the roll into the paper holder, lining up the media roll core with the core holder. Pull the small leader of the paper out and close the paper door. It should click when properly closed.
Battery Disposal: Please dispose of the batteries separately and free of cost at your sales agency or the designated local collecting points. Refer to the User Guide for battery disassembly and removal instructions.
Control Panel Indicators:
- Power & Status (Green)
- Power & Status (Yellow)
- Power & Status (Red)
Control Panel Functions:
- Power Button: Power up and power down
- Paper feed button: Advance paper, Self-test print
- Menu button: Menu set up
Display Navigation:
- Scroll down: Press the Paper feed button
- Select category: Press the Menu button
- Save setting: Press the Power button
- Go back: Press the Menu button
- Return to the main menu: Press the Power button
USB Access to Printer Web Pages: Some country-specific Windows Operating Systems may require downloading the RNDIS driver from www.printek.com support, downloads, drivers, and software, to use the IP-over-USB mode. Please note that when the printer is connected via USB and in IP over USB mode, accessing the Internet temporarily may not be possible.
Dual Radio FP641: Dual Radio printers come with Wi-Fi and BT modules set to Discover ON. To turn off a radio module, go to BT Config or Wireless Config.

Product Usage Instructions

Before starting, visit www.printek.com Support, Downloads, Drivers, and Software to download the FP641 printer driver.
Battery Replacement:
Depress the battery door clip.
Pull the battery out.
Paper Compartment:
Press the Paper door release button to open the paper compartment door.
Insert the roll into the paper holder, aligning the media roll core with the core holder.
Pull the small leader of the paper out.
Close the paper door. It should click when properly closed.
Battery Disposal:
Dispose of the batteries separately and free of cost at your sales agency or the designated local collecting points.
Refer to the User Guide for battery disassembly and removal instructions.
Control Panel Functions:
- Power Button:
- To power up, press and hold for approximately 3 seconds.
- To power down, press 2 times rapidly.
- Paper feed button:
- To advance the paper, press 1 time.
- To perform a self-test print, press 2 times.
- Menu button:
- To enter the menu, press 2 times.
- To exit the menu, press 2 times.
- To scroll down in the menu, press the Paper Feed button.
- To select a category, press 1 time.
- To save a setting, press the Power button.
- To go back, press 1 time.
- To return to the main menu, press 1 time.
Dual Radio FP641:
- Dual Radio printers come with Wi-Fi and BT modules set to Discover ON.
- To turn off a radio module, go to BT Config or Wireless Config.
USB Access to Printer Web Pages:
- Some country-specific Windows Operating Systems may require downloading the RNDIS driver from www.printek.com support, downloads, drivers, and software to use the IP-over-USB mode.
- When the printer is connected via USB and in IP over USB mode, accessing the Internet temporarily may not be possible.

This guide provides information on the daily use of the FP641 printer. For additional information, please refer to the FP641 User Guide.
BEFORE you begin, please visit www.printek.com Support, Downloads, Drivers, and Software, to download the FP641 printer driver.

Printer features

$PRINTEK-FieldPro-641-Mobile-Printer-fig- $1$$

Media

Press the Paper door release button to open the paper compartment door. Insert roll into paper holder lining up media roll core with core holder. Pull a small leader of paper out and close the paper door. “Clicks” when properly closed.

Battery $PRINTEK-FieldPro-641-Mobile-Printer-fig- $3$$

The battery icon on the display will indicate the battery level.

Disposal

Please dispose the batteries separately and free of cost at your sales agency or the designated local collecting points. Therefore please consider the national recycling standards! Disassembly and removal of the batteries are described in the User Guide

Control Panel indicators

POWER & PAPER FEED| FUNCTION| HOW TO:| | Power & Status (Green)

| Power & Status (Yellow)

| Power & Status (Red)

|

Indication

---|---|---|---|---|---|---|---
Power Button| Power up and power down| Press & hold for

~ 3 seconds

| On| Off| Off| Power supplied by battery
| Access Web page *| Press 2 times to enter

Press 2 times to exit

| On| Off| Off| Power supplied by

adapter

Paper feed button| Advance paper| Press and hold| Off| On| Off| Charging battery
| Self-test print| Press 2 times rapidly| Off| Off| On| Booting up
| Off| Off| On| Power on/off
DISPLAY NAVIGATION:| FUNCTION| HOW TO:| | Off| Off| On| Battery failure
Menu button| Menu set up| Press 1 time| Flashing (If no battery is

charged)

| Flashing

(If battery is being charged)

| | Config mode
Paper feed

button

Go back

|

Press 2 times

| Return to main menu| Press 3 times

Dual radio FP641

Dual Radio printers arrive with Wi-Fi and BT modules set to Discover “ON”. If desired, go to “BT Config” or “Wireless Config” to set a radio to “OFF”

USB Access to Printer Web Pages

Press and hold the POWER button for 3 seconds to power the printer.
Connect a USB cable between the printer and a PC.
- To access the FP641 web page, press the Power button twice rapidly. This will put the printer into Configuration mode.
When the printer is in Configuration mode the Power LED will flash.
Open the browser on your PC type 169.254.200.1 into the address bar of the browser and hit Enter – A login box should appear:
Type “0000” and hit Enter- you should now be at the home page for FP641 Configuration.
To return the printer to normal operating mode, double-click the POWER button. The Power LED will be returned to a solid light
Some country-specific Windows Operating Systems have not activated or installed the RNDIS driver to use the IP-over-USB mode. Therefore, please refer to our web site www.printek.com support, downloads, drivers and software, to download the RNDIS driver.
Once the printer is connected via USB and in IP over USB mode it is temporarily not possible to access the Internet.