tp-link VIGI NVR1016H Network Video Recorder Installation Guide

tp-link VIGI NVR1016H Network Video Recorder

Note: images may differ from the actual products.

Hard Drive Installation

For first-time installation, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of the enterprise or surveillance level. Before installation, please disconnect the power from the network video recorder (NVR).

1. Remove the fixing screws on the side and back panels to open the cover of the NVR.
2. Attach the 4 included HDD screws to your hard drive. Do not fasten. Hard Disk Drive (HDD)
3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert the HDD interface into the slot.
4. Flip the NVR upside down and fasten the HDD screws. Replace the cover and fasten the screws of the NVR.

Hardware Connection

1. Connect your monitor to the HDMI or VGA port according to the connection port it supports
2. Connect your monitor to a power source and turn it on.
3. Connect the LAN port of the NVR to a network device with an Ethernet cable.
4. Connect the provided USB Mouse to the USB Interface of the NVR (front panel).
5. Connect the power adapter to the NVR.

Cautions:

• If you want to turn off the NVR after hard drive installation, click the Power button on the Main Menu of your monitor. Do not unplug it directly.
• The input voltage should match the device’s power requirements.

Network Topology

Step 1. Connect your cameras to the same network as your NVR.
Step 2. Follow the instructions to finish Quick Setup.

1. Create a login password for the NVR and a preset password for your unset cameras.
2. Enable Plug and Play and the NVR will automatically find and add your cameras in your network.
3. Follow Quick Setup to complete the settings of the NVR.

Note: For more instructions, please refer to the NVR’s User Guide.
Step3 (Optional). Bind your NVR to a TP-Link ID for remote access and management. (Internet required)
Note: If you don’t have a TP-Link ID, sign up first.

More Management Methods

• VIGI Security Manager (Windows only)
  You can use the VIGI Security Manager to view live video and modify NVR settings on your computer. Please Download it on your computer at https://www .tp-link. com/download-center/

• VIGI App
  The VIGI App provides a simple and intuitive way to remotely view live video, manage NVR, and get instant alerts.

Scan the QR code to download and install the VIGI app from the App Store or Google Play

FAQ (Frequently Asked Questions)

Q1. What should I do if I forget the login password of my NVR?
A1. Click Forgot Password on the login page and then follow the instructions to reset the password.
A2. Remove the cover, then press and hold the Reset button inside the NVR for over 3 seconds. The NVR will restore to the factory settings. Then follow Quick Setup to create a login password.
Q2. What can I do if my NVR fails to connect to the Internet?
A1. Check if the internet is working properly. A2. Make sure your NVR is in the same network segment as your network devices. For more details, please refer to the NVR’s User Guide. If you have more questions, please visit https://www.tp-link.com/support/ faq/2850/

References

• Download Center | TP-Link
• Anatel — Agência Nacional de Telecomunicações
• Download Center | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link
• Support | TP-Link
• CE Regulatory Compliance | TP-Link
• Support | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• Common questions about VIGI | TP-Link United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>