SILVERSTONE ARM13 Single Monitor Arm Instruction Manual
- June 15, 2024
- SilverStone
Table of Contents
SILVERSTONE ARM13 Single Monitor Arm Instruction Manual
Content
-
A(x1)
-
D (x1)
-
B(x1)
-
C (x1
-
E (x1)
-
F (x1)
-
G (x1)
-
3mm (x1) H
-
6mm (x1)
-
M4x12 (x4) M-A
-
M5x12 (x4) M-B
-
D5 (x4) M-C
INSTALLATION
Please read the entire instruction manual before starting installation and
assembly. If you have any questions regarding any of the instructions or
warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instruction. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact the place of purchase for a replacement.
MAINTENANCE : Check that the product is secure and safe to use at regular intervals (at least every three months)
Warranty Information
This product has a limited 1 year warranty in North America and Australia. For information on warranty periods in other regions, please contact your reseller or Silver Stone authorized distributor
Warranty terms & conditions
- Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
- Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
- Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
- Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
- Warranty mark/stickers are not removed or broken.Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
- Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
- Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
- Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.
- You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
- If a problem develops during the warranty period, please contact your retailer/reseller/Silverstone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of
shipping (or otherwise transporting) the product to Silverstone authorized distributors. Silverstone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from Silverstone. Updated warranty information will be posted on Silverstone’s official website. Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com) SilverStone Technology
in North America may repair or replace defective product with refurbished
product that is not new but has been functionally tested. Replacement product
will be warranted for remainder of the warranty period or thirty days,
whichever is longer.All products should be sent back to the place of purchase
if it is within 30 days of purchase, after 30 days, customers need to initiate
RMA procedure with SilverStone Technology in USA by first downloading the “USA
RMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to amajor failure. Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. + 886-2-8228-1238 (standard international call charges apply)
For Europ e
(support.eu@silverstonetek.de)
For China
(support@silverstonetek.com.cn)
For all other regions
(support@silverstonetek.com)
NO.G11249200
www.silverstonetek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>