HOMCOM 820-179 Electric Fireplace Heater Instruction Manual

: June 15, 2024
: HOMCOM

Table of Contents

HOMCOM 820-179 Electric Fireplace Heater
Product Information
Product Usage Instructions
Only for UK
OPERATING INSTRUCTIONS
SAFETY Cut-Off
MAINTENANCE
BULB REPLACEMENT
TROUBLESHOOTING
Disposal
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOMCOM 820-179 Electric Fireplace Heater

Product Information

Model Identifier

ND-18D3CL

Heat Output

Nominal Heat Output: 1.8 kW
Minimum Heat Output (indicative): 0.9 kW
Maximum Continuous Heat Output: 1.8 kW

Auxiliary Electricity Consumption

At Nominal Heat Output: 0.012 kW (fan motor)
At Minimum Heat Output: 0.012 kW (fan motor)
In Standby Mode: 0.00 W

Fan Assisted Heat Output

N/A

Type of Heat Output/Room Temperature Control

Single Stage Heat Output and No Room Temperature Control: No
Two or More Manual Stages, No Room Temperature Control: No
With Mechanic Thermostat Room Temperature Control: No
With Electronic Room Temperature Control: No
Electronic Room Temperature Control Plus Day Timer: No
Electronic Room Temperature Control Plus Week Timer: No

Other Control Options

Room Temperature Control, with Presence Detection: No
Room Temperature Control, with Open Window Detection: No
With Distance Control Option: No
With Adaptive Start Control: No
With Working Time Limitation: No
With Black Bulb Sensor: No

Contact Details

Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden Lane South, Perivale, UB6 7RH
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk

Product Usage Instructions

Ensure the product is plugged into a socket that conforms to BS1363 and has a maximum withstand current value greater than 13A.
Do not use two high-power appliances in the same socket.
Make sure the plug is fully inserted into the socket.
Avoid using extension cords with the product.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

CAUTION

Please read all instructions carefully before using this product.
Make sure that the voltage rating label on the type plate corresponds to your main voltage. If not see your retailer and do not connect the appliance.
Never use the appliance unsupervised when in use.
If you have to leave even for a short moment please stop the appliance.
Keep out of reach of children and do not allow them to operate this appliance
Only use the appliance for domestic purposes and in the way indicated in these instructions.
From time to time check the cord for damages. Never use the appliance if the cord or any part of the appliance shows any signs of damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Make sure the connection cord does not touch any hot surfaces.
WARNING: In order to avoid overheating, do not cover the heater.
Keep the appliance at least 15cm (&inches) from walls and any other thing, to permit a good air circulation.
Do not use the appliance outdoors
Do not use if you have wet hands.
Never use the appliance on or near hot surfaces.
Never move the appliance by pulling the cord.
Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
Do not clean the appliance with abrasive chemicals.
Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance
Never route the mains cable beneath carpet.
Never use the heater to dry clothes or any other similar items.
The heater must not be located immediately below a socket outlet.
This heater must not be used with an extension lead.
Dot use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Do not use this heater in the immediate surroundings of a bath. a shower or a swimming pool.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device. such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in. regulate and clean the appliance or perform user maintenance.
CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Regarding the instructions for replacing bulb, thanks to refer to the below paragraph of the manual.

Only for UK

A. Do not use two high-power appliances in the same socket.
B. The plug needs to be plugged in fully.
C. Product socket cannot use extension cord.
The socket needs to be conformed to BS1363, the maximum withstand current value needs to be greater than 13A.

OPERATING INSTRUCTIONS

Never cover the heater or obstruct the opening at the base of the heater, this could cause overheating and consequent risk of fire.
Never move the heater when it is operating, this could cause the bulb breakdown. Please turn the heater off if you want to move it.
When you turn the heater on for the first time you may notice a slight odor, this is harmless and will stop after a short amount of time.

Heater Control Panel
The following switches are located at back of door.

Insert plug into mains socket Select the desired functions:

Switch ( 3a) Switchs ON/OFF electricity supply to the heater and flame effect
Note: This switch must be in the ON position for heating operation.
Switch ( 3b) Switchs ON/OFF 900W heat output
Switch ( 3c) Switchs ON/OFF 1800W output with switch 3b
Note: The flame effect can be operated with or without heat.
Rotate thermostat control (1) clockwise or anti-clockwise to achieve desired room temperature.
Increase or decrease the flame effect by rotating the flame adjustment switch (2).

SAFETY Cut-Off

Thie appllanca 11 flttad with a ..rely cut-off which wlll operate If Iha heater ovarheate (o.g.Dua to blocked air vents). For aafety n1e110ns, lhe heater wlll NOT eutometlcally re eat. To reeetthe appllance, disconnect the appllance lrom lhe mains eupply for atleast 16 minute a. Reconnect the aupply to the malna and awltch on the eppllance.

MAINTENANCE

Before cleaning or maintenance operation, switch off and unplug the appliance. Ensure it is perfectly cooled. To remove the dust, wipe the appliance with a cloth Never use abrasives or detergents

BULB REPLACEMENT

This product does not use a standard bulb for its flame effect. The appliance uses an electronically controlled LED system to create the effect, therefor no parts need to be replaced. There are no user-serviceable parts on this appliance. Under no circumstances should the appliance be serviced be anyone other than a qualified electrician.

TROUBLESHOOTING

No light from the fuel effect: Possibly a bulb failure. Check the LED system by qualified electrician.
No heat or light: Check the wall socket by plugging in a known working appliance. If Lights undia. necorate isolate have ate seedle the eletican.
room temperature. Alternatively, the automatic cut-off may have engaged – see Safety Cut-Off section.

Disposal

At the end of the product’s serviceable life it should be disposed of thoughtfully and she power supply cord and the powerior cuttim the Thailug should be removed from

TECHNICAL SPECIFICATION

Supply: 220-240V~ 50Hz
Rated power: 1800W
Lighting: LED bulbs((no replaceable parts)

Meaning of crossed -out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Table for information requirements for electric local space heaters

Model identiﬁer(s): ND-18D3CL

0.9

1.8

| ****

kW

Contact details:

| IMPORTER ADDRESS:

MH STAR UK LTD 0044-800-240-4004

Unit 27, Perivale Park,

Horsenden lane South enquiries@mhstar.co.uk

Perivale, UB6 7RH MADE IN CHINA

Remark:

For electric local space heaters, the measured seasonal space heating energy eﬃciency ηs cannot be worse than the declared value at the nominal heat output of the unit.