iJOY B08ZL3TRQC Solist Wireless Earbuds User Manual

June 6, 2024
iJOY

ENJOY SOLOIST WIRELESS
EARBUDS
Operation Manual

Pairing

Remove the earbuds from the charging case. Both earbuds flash red and blue alternately. Wait 3-5 seconds for auto-pairing until you hear the beep indicating that the earbuds have been successfully paired. At the same time, one the earbud will flash red and blue alternately, while the other the earbud will slowly flash blue

Connect to your devices

Turn on Bluetooth on your devices. Search and click to pair “AL7501685”. A beeping sound indicates that the earbud has been successfully connected to your phone devices. At the same time, both earbuds slowly flash blue.

For calling

  • Briefly presses one of the earbuds once to answer the incoming call or finish the phone call.
  • Briefly press one of the earbuds twice to activate Siri.
  • Press and hold one of the earbuds for 1-2 seconds to reject the incoming call.
  • Press and hold one of the earbuds for 2-3 seconds to
    (Please note: there is no function for reading the number of the incoming call.
    Also, when you make a call or answer the phone, the sound is received in both earbuds, which is known as bilateral calling)

**For playing the music

**

  • Briefly press one of the earbuds to play or pause the music.
  • Briefly press one of the earbuds twice to activate Siri.
  • Briefly presses the left earbuds three times to play the last track.
  • Briefly presses the right earbuds three times to play the next track.
  • Press and hold the left earbuds for 1-2 seconds to higher the volume
  • Press and hold the right earbuds for 1-2 seconds to lower the volume
  • Press and hold the button for2-3 seconds to power them on/off

Charging

1. Charging the earbuds Place the earbuds into the charging case. The earbuds will automatically break the connection with your device.
The earbuds will be charged automatically, with the charging indicator lit up blue.
2. Charging the charging case Connect to the power supply via the type c cable to charge the charging case. The charging indicator flashes red and is continuously lit red when charging is complete.

SPECIFICATIONS


– Bluetooth version: 5.1
– Earphone battery capacity: 3.7 V 40 mAh
– Earphone input: 5.0 V DC 30 mA
– Charging dock capacity: 3.7 V 350 mAh
– Charging dock input: 5.0 V DC 0.5 A
– Play time at 70% volume: ±4 h
– Charging time: ±1 – 1.5 h
– Standby time: ±100 h
– Transmission range: 10 m
– Operation frequency: 2402 MHz – 2480 MHz
– Maximum RF output power: 90.81 dBm

Warning: To prevent possible hearing damage, do not listen to high volume levels for long periods.

Recycle your device

Used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries, you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point.
Imported by: SHI B.V, Keskesweg 19, 5721 WS Asten, The Netherlands All brands and logos are registered trademarks of their respective owners.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals