Aikoper NTH15-18MR CERAMIC TOWER HEATER USER MANUAL

Aikoper NTH15-18MR CERAMIC TOWER HEATER

Description

With a maximum 1500w power output and 4 heat settings, the entire room may be efficiently heated when it’s cold outside. You can adjust the temperature in 1-degree increments to suit your preferences. At 1500W, a special MAX function operates continuously. This ceramic tower heater uses ceramic heating technology to fast heat up and quickly warm the air around you, making it perfect for quickly removing the chill. No assembly is necessary, and a carry handle makes it portable. The ECO mode enables the heater to automatically turn on and off by comparing the room temperature with the selected temperature, potentially maximizing your energy use. The tower heater with auto shut-off offers trustworthy overheating and tip-over protection. Safe for households with children or animals that could knock it over. A 24-hour timer makes sure everything is perfect, warm, comfortable, and worry-free. We are proud of our ceramic tower heater’s quality and after-sale support. Contact us with any questions using the Amazon mailbox, and we’ll respond within a day.

IMPORTANT INSTRUCTIONS

Please Read And Save These Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using the heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. If provided, always use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
4. Always unplug the heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Do not use the heater outdoors.
7. This heater is not intended for use in bathrooms, laundry areas and similar moist indoor locations. Never locate heater where it may fall into a bathtub or other water container.
8. Do not run cord under the carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
9. CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard.
10. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.
11. CAUTION: It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
12. To disconnect the heater, first turn the controls to off, then remove plug from the outlet. Never pull by the cord.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
14. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surface, like a bed, where openings may become blocked.
15. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
16. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
17. CAUTION: Always plug heaters directly into a wall outlet/receptacle. Never use an extension cord or reloadable power tap (outlet/power strip).
18. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
19. “SAVE THESE INSTRUCTIONS”

PART FIGURE

OPERATING INSTRUCTION

Check Before Turning On The Appliance

1. Check if the power cord is in good condition.
2. The product adopts a 120V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe grounding device, otherwise, please replace it with a qualified socket.

Start The Machine

Plug the unit into a grounded 120V outlet, the power light ****on, and press the ON/OFF key (or press the ON/OFF key of the remote controller) for start, the machine supplies air at high power after the start, and the digital screen displays “HI”.

Mode Setting

Repeatedly press the “Function” key so that the heater switches in the order of “HIGH mode – LOW mode –  ECO mode “.

Temperature Setting

In the  ECO mode of the machine, press “+” or “-” can set the temperature value, set the range of 40-95°F.When the room temperature exceeds the set temperature at 4°F, the display flashes 10s, the machine stops working, and stays in the standby state. When the temperature is lower than the set temperature, the machine starts to heat up again.

Timing Function

Timing Stop

When the heater is turned on, press the TIMER key to enter the timing stop state (within 0-8 hours), then press the “+” key to increase the timing stop time, and press the “-” key to decrease the timing stop time.

Timing Start

When the electric heater is in standby mode, press the TIMER key to enter the reservation start mode (within 0-8 hours), then press the “+” key to increase the reservation start time , and press the “-” key to decrease the reservation start time.

Swing Function

The electric heater in operation mode, press the “swing” key to open the swing function, and press this button to turn off the swing function; when the electric heater stops the heating function, the wind swinging function also stop.

Temperature sensor short circuit, open circuit protection function  No matter in what mode, the temperature sensor appears short circuit or open circuit, digital screen displays “E1” or “E2” and constantly flickers, while any key operation is invalid and the buzzer rings 10 times.

Safety Protection

In the start state, when the room temperature TH is above 122°F, close all outputs system, The digital screen displays “FF” and flashes 1 time per second at a frequency of 75 times, Pressing any key will not work, only the power down to exit the protection.

ECO Energy Saving Function

Select the ECO energy-saving gear, and electric heater according to the ambient temperature and the temperature setting of the machine to do a comparison, and select the appropriate gear operation to achieve the purpose of saving energy.

Remote Controller

Use of the remote controller: the key functions are basically the same as the body operation panel.

Remote Control

BATTERIES INSTRUCTIONS (Included)

1. Please push the locking latch in the direction of Arrow A, and pull out the pull notch in the direction of Arrow B at the same time.
2. Use 1 “CR2032” lithium battery (included)
3. Insert the batteries, making sure that the positive terminals are facing the proper way.
4. Replace the cover.

BATTERY WARNING

****

1. Do not dispose of batteries in a fire, batteries may explode or leak.
2. Do not mix old and new batteries
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
4. Non-rechargeable batteries are not to be recharged.
5. Batteries are to be inserted with the correct polarity.
6. Exhausted batteries are to be removed from the product.
7. The batteries must be removed from the remote controller before it is scrapped and that they are disposed of safely.

MAIN TECHNOLOGY SPECIFICATIONS

Power Supply: AC 120V ~ 60Hz

MODEL

| POWER REGULATION RANGE (W)
---|---
LOW| HIGH| LOW OSC| HIGH OSC
NTH15-18MR| 900| 1500| 900| 1500

Troubleshooting

If the product does not operate or does not operate properly, first check according to the following list. If the reason the product does not operate or does not operate properly is not included in the following list, the product may have failed. At this time, it is recommended to send the product to the dealer for treatment.

After the power is

engaged, the machine does not work.

| The plug may not be plugged well.| Check whether the plug is

properly inserted into the receptacle.

The machine suddenly stops during heating.| The temperature exceeds the threshold of the thermal cut- off.| Pull off the plug manually, and then insert it into the receptacle again when the

machine is cooled.

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance.  ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING.  Be sure to save the box for off-season storage.

• Turn the heater “OFF”, unplug it, and wait for the heater to cool down. Use a dry cloth to clean only the external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and dry place.

FREQUENTLY ASKED QUESTIONS

What is the maximum power output of the Aikoper NTH15-18MR Ceramic Tower Heater?

The maximum power output is 1500w.

How many heat settings does the heater have?

The heater has 4 heat settings.

Is assembly required for the Aikoper NTH15-18MR Ceramic Tower Heater?

No, assembly is not necessary.

Does the heater have a carry handle?

Yes, the heater has a carry handle for portability.

What is the ECO mode on the heater?

The ECO mode enables the heater to automatically turn on and off by comparing the room temperature with the selected temperature, potentially maximizing your energy use.

Does the heater have overheating and tip-over protection?

Yes, the tower heater with auto shut-off offers trustworthy overheating and tip-over protection.

Can the temperature be adjusted in 1-degree increments?

Yes, the temperature can be adjusted in 1-degree increments to suit your preferences.

Can the heater be used in bathrooms or laundry areas?

No, this heater is not intended for use in bathrooms, laundry areas, and similar moist indoor locations.

Can an extension cord or reloadable power tap be used with the heater?

No, always plug heaters directly into a wall outlet/receptacle. Never use an extension cord or reloadable power tap (outlet/power strip).

How can I clean the heater?

Turn the heater “OFF”, unplug it, and wait for the heater to cool down. Use a dry cloth to clean only the external surfaces of the heater. Do not use any cleaning agents or detergents.

What is the heating capacity of the Aikoper NTH15-18MR Space Heater?****

The Aikoper NTH15-18MR Space Heater has a heating capacity of [insert specific heating capacity].

Can the Aikoper NTH15-18MR Space Heater be used in large rooms?****

The Aikoper NTH15-18MR Space Heater is suitable for small to medium-sized rooms, but it may not be ideal for large rooms or open spaces. It’s important to consider the square footage and insulation of the room when selecting a heater.

Is the Aikoper NTH15-18MR Space Heater energy efficient?****

The Aikoper NTH15-18MR Space Heater is designed to be energy efficient, with features such as an adjustable thermostat and programmable timer settings to help optimize energy usage.

Does the Aikoper NTH15-18MR Space Heater have safety features?****

Yes, the Aikoper NTH15-18MR Space Heater is equipped with safety features such as tip-over protection and overheat protection. These features automatically shut off the heater if it is accidentally tipped over or reaches excessive temperatures.

Can the Aikoper NTH15-18MR Space Heater be controlled remotely?****

No, the Aikoper NTH15-18MR Space Heater does not have remote control functionality. It can be controlled manually using the built-in control panel on the heater.

Can the Aikoper NTH15-18MR Space Heater be mounted on the wall?****

No, the Aikoper NTH15-18MR Space Heater is designed for freestanding use and cannot be mounted on the wall. It should be placed on a stable, flat surface.

Is the Aikoper NTH15-18MR Space Heater noisy?****

The Aikoper NTH15-18MR Space Heater is designed to operate quietly. While it may produce some noise during operation, it is generally considered to be relatively quiet compared to other space heaters.

DOWNLOAD THE PDF LINK:Aikoper NTH15-18MR CERAMIC TOWER HEATER USER MANUAL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>