Mean Well EDR-150-24 Series 150W Single Output Industrial Owner’s Manual

: June 15, 2024
: MEAN WELL

Table of Contents

Mean Well EDR-150-24 Series 150W Single Output Industrial
Product Information
Features
Applications
Description
SPECIFICATION
Block Diagram
Dimensions
Installation Instruction
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mean Well EDR-150-24 Series 150W Single Output Industrial

Product Information

The EDR-150-24 is an economical slim DIN rail power supply series that provides up to 156W of power at 230VAC input.
It is designed to be installed on TS-35/7.5 or TS-35/15 mounting rails.
The power supply has a width of 40mm, allowing for space-saving installation inside cabinets.
It features universal AC input with a range of 90VAC to 264VAC and conforms to BS EN/EN61000-3-2 (80% Load), which is the European Union regulation for harmonic current.

Features

Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
- Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508 (industrial control equipment) approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
100% full load burn-in test
2 years warranty

Applications

Industrial control system
Semiconductor fabrication equipment
Factory automation
Electro-mechanical apparatus

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx.

Description

EDR-150-24 is one economical slim DIN rail power supply series, providing up to 156W at 230VAC input.
This series is adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails.
The body is designed 40mm in width, which allows space saving inside the cabinets.
The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2(≤80% Load), the norm the European Union regulates for harmonic current.
EDR-150-24 is designed with metal housing that enhances the unit’s power dissipation.
With working efficiency up to 87%, the entire series can operate at the ambient temperature between -20°C and 60°C under air convection.
It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications.
The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV BS EN/EN62368-1, and etc.) make EDR-150-24 a very competitive power supply solution for industrial applications.

Model Encoding

SPECIFICATION

MODEL	EDR-150-24

OUTPUT

INPUT

| VOLTAGE RANGE Note.6| 90 ~ 264VAC       127 ~ 370VDC [DC input operation possible by connecting AC/L(+), AC/N(-)]
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 87%
AC CURRENT (Typ.)| 2.6A/115VAC        1.7A/230VAC
INRUSH CURRENT (Typ.)| 20A/115VAC        35A/230VAC
LEAKAGE CURRENT| <1mA / 240VAC

PROTECTION

| ****

OVERLOAD Note.7

| 105 ~ 130% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed / 230VAC

105 ~ 150% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed / 115VAC

OVER VOLTAGE

| 29 ~ 33V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, re-power on to recover

ENVIRONMENT

| WORKING TEMP.| -20 ~ +60℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

SAFETY & **EMC**

(Note 4)

| SAFETY STANDARDS| UL508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1 approved;(meet BS EN/EN60204-1)
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

| Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2, Class A (≦80% Load), BS EN/EN61000-3-3, EAC TP TC 020, CNS13438 Class A

EMC IMMUNITY

| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2),

heavy industry level, EAC TP TC 020

OTHERS

| MTBF| 2717.1K hrs min. Telcordia SR-332 (Bellcore) ; 472.5K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 40125.2113.5mm (WHD)
PACKING| 0.6Kg; 20pcs/13Kg/1.16CUFT

NOTE

| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended.

6. Derating may be needed under low input voltage. Please check the derating curve for more details.

7. Hiccup mode at 90~100VAC, recovers automatically after fault condition is removed.

8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx