SEALEY TP68.V2 Self Priming Lever Pump User Manual
- June 15, 2024
- SEALEY
Table of Contents
SEALEY TP68.V2 Self Priming Lever Pump User Manual
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
-
Refer to instruction manual
-
Wear protective gloves
-
Wear eye protection
SAFETY
-
WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are strictly adhered to when using this product.
Familiarise yourself with the product, it’s applications and limitations as well as the specific potential hazards peculiar to this product.
Maintain the pump in good condition.
Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
Use only to pump NON-corrosive fluids such as anti-freeze, oil, degreasants, solvents, agricultural and industrial chemicals and the like.
Ensure safety eye protection and protective clothing are worn when using this product.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the working area.
Dispose of waste liquid in accordance with local authority regulations.
DO NOT use to extract corrosive fluid.
DO NOT dismantle, tamper with or adapt the pump for any purpose other than what it was designed for.
DO NOT use the pump as a handle with which to move the fluid drum.
Keep the pump clean and store in a safe dry, childproof location. -
WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment.
INTRODUCTION
Steel barrelled, self-priming, lever pump. Supplied with 2”BSP adaptor and dip tube suitable for 25 to 205L drums. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 500ml per stroke.
MAINTENANCE
Ensure all liquid is removed from pump before storage.
Clean out pump before using on other liquids.
Store in a safe dry, childproof location
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice. Please note that other versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team on [email protected]
or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
[email protected]
www.sealey.co.uk
