adidas T-23 Bluetooth Treadmill Sweatband Machine User Manual

T-23 TREADMILL

T-23 Bluetooth Treadmill Sweatband Machine

https://www.adidashardware.com/t23-treadmill

CAUTION

• The equipment is intended for home use only (HC). Do not use the equipment in any commercial, rental, or institutional setting
• Use the equipment only as described in this manual. Consult your doctor before performing any exercise program
• Keep children and pets away from the device at all times
• This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved
• Cleaning and user maintenance shall not be made by children under 14 years old
• Ensure the equipment is on a flat, stable and level surface with at least 0.6m of clear area surrounding the equipment
• Always wear appropriate exercise clothing and training shoes
• The safety level of the equipment can only be maintained if it is examined regularly for damage and wear. Replace defective components immediately and/or keep the equipment out of use until repaired. Pay special attention to components most susceptible to wear. All warnings and instructions must be read and followed prior to use
• Keep hair, body, and clothing free and clear of all moving parts
• If at any time during exercise you feel faint, dizzy, or experience pain, stop exercising immediately and consult your physician
• Over exercising may result in serious injury or death
• Keep the equipment indoors, away from moisture and dust. Do not put the equipment in a garage or covered patio, or near water
• If any of the adjustment devices are left projecting, they could interfere with the user’s movement
• The equipment should be used only by persons weighing 150kg/330.7lb or less
• Heart rate monitoring system may be inaccurate
• Excessive exercise can lead to serious injury or death. Stop exercising immediately
• This equipment is for consumer use only
• Ensure a safety area of at least 2000mm x 1 000mm behind the equipment

CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help CAN ICES-3(B) / NMB-3(B)

FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID: 2AMDBBLE006
IC: 22882-BLE006

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using (this appliance).

DANGER
– To reduce the risk of electric shock and the injury from moving parts:

Always unplug this appliance from the electrical outlet immediately after using and before cleaning or servicing.

WARNING
– To reduce the risk of burns, fire, electric shock, or injury to persons:

1. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine
2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer
3. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like
4. Never drop or insert any object into any opening
5. Do not use outdoors. Household use only
6. Do not operate where aerosol (spray) products are being used or where oxygen is being administered
7. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts
8. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair
9. Keep the cord away from heated surfaces
10. To disconnect, turn all controls to the off position, then remove plug from outlet
11. CAUTION: Risk of Injury to Persons – To Avoid Injury, use extreme caution when stepping onto or off of a moving belt. READ INSTRUCTION MANUAL BEFORE USING
12. Connect this appliance to a properly grounded outlet only. See GROUNDING INSTRUCTIONS
13. REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN, AS APPLICABLE) WHEN NOT IN USE, AND STORE OUT OF REACH OF CHILDREN

SAVE THESE INSTRUCTIONS.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug illustrated in sketch A in Figure. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.

GROUNDING METHODS

PRODUCT REGISTRATION AND SUPPORT

https://www.adidashardware.com/product-support

TRAIN ALL OVER THE WORLD
thousands of videos available
STRUCTURED WORKOUTS
coaching & interval training
SHARE YOUR ACHIEVEMENTS
with the Kino map community
MULTIPLAYER MODE
challenge your friends
+1m active users

www.kinomap.com

https://app.adjust.com/axmhri8

VIDEO GAME STYLE TRAINING
RUN THROUGH IMMERSIVE WORLDS
1000+ WORKOUTS CURATED BY COACHES
GLOBAL CONNECTIVITY & COMMUNITY
GROUP RUNS, COMPETMONS & RACES

https://app.adjust.com/axmhri8

| | | Q T Y.
---|---|---|---
A01| Main frame| | 1
A02| Motor bracket| | 1
A03| Console bracket| | 1
A04| Left upright tube| | 1
A05| Right upright tube| | 1
A06| Tablet holder| | 1
A07| Turning fixed round plate| | 1
A08| Panel turning tube bracket| | 1
A09| Incline bracket| | 1
B01| Front roller| | 1
B02| Back roller| | 1
B03| Universal joint screw| | 2
B04| Moving wheel bushing| | 2
B06| Cross wrench with screw driver| | 1
B07| 6# Allen wrench| | 1
B08| Pulse plate| | 4
B09| 8# Allen wrench| | 1
B10| Tablet holder rotating seat| | 1
B11| Needle bearing| | 1
B12| Tablet telescopic rod| | 2
B13| Compression spring A| | 2
B14| Tablet holder rotating base| | 1
B15| Safety key spring plate A| | 1
B16| Safety key spring plate B| | 1
B19| Big washer| | 2
B20| 17# Spanner| | 1
B21| Grounding copper sheet| | 2
C01| Panel top cover| | 1
C02| Panel bottom cover| | 1
C03| Back end cover| | 1
C04| Left side rail| | 1
C05| Right side rail| | 1
C06| Running belt| | 1
C07| Universal foot pad| | 2
C08| Foot pad cover| | 2
C09| Cushion| | 4
C10| Cushion| | 4
C11| Moving wheel| | 2
C12| Motor belt| | 1
C13| Flat foot pad| | 2
C14| Side rail pad| | 6
C15| Plastic pad| | 2
C16| Display panel| | 1
C17| Panel rotation cover| | 2
C18| Safety key clip| | 1
C19| Safety key| | 1
C20| Motor top cover| | 1
C21| Light cover| | 1
C22| Console top cover| | 1
C23| Console bottom cover| | 1
C24| Console small cover| | 1
C25| Bottle holder pad| | 2
C26| Left handlebar| | 1
C27| Right handlebar| | 1
C28| Speaker fixed base| | 2
C29| Speaker hiding plate| | 2
C30| Tablet holder front cover| | 1
C31| Tablet holder back cover| | 1
C32| Sleeve| | 8
C33| Tablet holder top cover| | 1
C34| Tablet holder bottom cover| | 1
C35| Tablet holder clip| | 1
C36| Tablet Holder mat| | 1
C37| Button +| | 1
C38| Button –| | 1
C39| Button| | 2
C40| USB module fixed base| | 1
C41| Bottle mat| | 2
C42| EVA pad| | 1
C43| Tablet holder clip cover| | 1
C44| Glass tube fastener| | 1
C45| Teflon washer| | 1
C46| Rubber pad| | 2
C47| Silicon anti-slip pad| | 1
D01| Nut| M8| 20
D02| Nut| M10| 5
D03| Bolt|  M1065| 1
D04| Bolt|  M1045| 3
D05| Bolt| M1020| 2
D06| Bolt| M1020| 12
D08| Bolt|  M865| 2
D09| Bolt|  M860| 1
D10| Bolt| M845| 5
D11| Bolt| M815| 4
D12| Bolt|  M612| 2
D13| Bolt|  M825| 4
D14| Bolt|  M516| 4
D15| Bolt| M512| 13
D16| Bolt| M512| 2
D17| Bolt|  M515| 6
D18| Bolt|  ST2.98| 8
D19| Screw|  ST2.96| 9
D20| Screw|  ST4.212| 42
D21| Screw| ST4.250 2| 2
D22| Screw| ST4.265| 3
D23| Screw| ST2.98| 24
D24| Screw| ST2.96.0| 19
D25| Screw| ST4.220 7| 7
D26| Bolt| M615| 4
D27| Screw| ST4.212| 5
D28| Flat washer| 8| 9
D29| Flat washer| 10| 14
D30| Big flat washer| Φ10Φ262.0 1| 1
D31| Big flat washer| Φ8Φ242.0| 4
D32| Spring washer| 5| 2
D33| Spring washer| 8| 4
D34| Spring washer| 10| 14
D35| Lock washer| 62| 62
D36| Lock washer| 83| 83
D37| Lock washer| 10| 2
D38| Bolt| M1020| 1
D39| Bolt|  M820| 4
D41| Bolt| M512| 2
D42| Screw|  ST4.212| 6
E01| Console| | 1
E02| Control board| | 1
E03| Panel top signal wire| | 1
E04| Console top signal wire| | 1
E05| Console middle signal wire| | 1
E06| Console bottom signal wire| | 1
E07| Instant speed top signal wire| | 1
E08| Instant speed bottom signal wire| | 1
E09| Instant Incline top signal wire| | 1
E10| Instant Incline bottom signal wire| | 1
E11| Hand pulse top signal wire| | 1
E12| Hand pulse bottom signal wire| | 2
E13| Safety Key connecting top wire| | 1
E14| Safety Key connecting bottom wire| | 1
E15| Running board| | 1
E16| Incline motor| | 1
E17| Magnet core| | 1
E18| Power wire| | 1
E20| AC single wire| | 1
E21| AC single wire| | 2
E22| AC single wire| | 2
E23| Grounding wire| | 1
E24| Power socket| | 1
E25| Square switch button| | 1
E26| Overload protector| | 1
E27| DC brushless motor| | 1
E28| Speaker| | 2
E29| Speaker connecting wire 1| | 1
E30| Speaker connecting wire 2| | 1
E31| Light tube| 1250mm| 1
E32| Running board grounding wire| | 2
E33| Hand pulse transfer module| | 1
E34| AC single wire| | 1
E35| AC single wire| | 2
E36| Hand pulse transfer module wire| | 1
E37| Light tube| 450mm| 1
E38| USB top signal wire| | 1
E39| USB middle signal wire| | 1
E40| USB bottom signal wire| | 1
F01| Filter| | 1
F02| Inductance| | 1
F03| AC single wire| | 1
F04| Grounding wire| | 1
F05| Screw| | 4
H01| Bluetooth transfer module| | 1
H02| Bluetooth transfer module wire| | 1
H03| Dongle| | 1
H04| Bluetooth transfer module wire 1| | 1
H05| Screw| | 4
J01| Belt hook| | 2
J02| Screw| | 4

CONSOLE

INSTANT INCLINE
Press 0-6-15 to choose incline quickly.
INSTANT SPEED
Press 5/3,10/6,15/9 to choose speed quickly. (kph/mph)
INCLINE+/-
Increase/decrease incline during workout.
PROGRAM
Press P button to choose from 24 built-in programs,
3 user defined programs and body fat function.
STOP/PAUSE
Press this button to either pause or stop the machine.
START
Press to start treadmill, the running belt will start moving.
MODE
Press this button to choose between time, distance, calories workout targets.
SPEED+/-
Increase/decrease speed during workout.
BLUETOOTH MUSIC
The user can connect their device to the treadmill via Bluetooth and select adidas to play music. Adjust the volume of music from your device directly.
BLUETOOTH DONGLE
Insert DONGLE into port. Connect to DONGLE via Bluetooth using the APP and your unique adidas code “adidas****”.

HANDLEBAR CONTROLS

SPEED+/-
Increase/decrease speed during workout.
INCLINE+/- (^/v)
Increase/decrease incline during workout.
HAND PULSE
Hold onto the pulse sensors on the handle bars for about 3 seconds, the display will show the heart rate value. This value is intended as a guide and can not be used as medical data.

COMPUTER PROGRAMS

MODE

• Press MODE to enter TIME, DISTANCE, CALORIES
• Press SPEED+/- or INCLINE+/- to set the workout target value
• Press START button, treadmill will run after 3 seconds
• Press SPEED+/- and INCLINE+/- to adjust the speed and incline

24 BUILT-IN PROGRAMS

• From standby mode, press P button, display will show 24 programs, select a program
• Press SPEED+/- or INCLINE+/- to set the workout time
• Each program can be divided into 10 sections; machine will beep 3 times when starting a new section
• Press SPEED+/- or INCLINE+/- to change the speed or incline during each section
• Machine will beep 3 times and stop when the program is finished

3 USER DEFINED PROGRAMS

• From standby mode, press PROG button until you see U1,U2,U3;
• Press SPEED+/- or INCLINE+/- to set the time
• Press MODE button to confirm and enter next section, repeat until you finish the setting of all 10 sections
• Press SPEED+/- or INCLINE+/- to change the speed or incline
• Set the running time and press START to begin

BODY FAT TEST

• From standby mode, press P button until you get to FAT
• Press MODE to enter information
• Set value with SPEED+/- or INCLINE+/- from F-1 to F-4 (F-1 GENDER, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT)
• Press MODE to enter F-5(F—5 BODY FAT TEST), hold hands on the hand pulse sensors, the console will display your body fat value after 3 seconds
• The body fat value is intended as a guide, and is not medical data:

HOW TO TRANSFER BETWEEN KPH TO MPH
Under standby mode, insert safety key, press SPEED+ and INCLINE+ buttons together and hold on about 5 seconds until you hear one sound, and then you can finish the transfer between kph and mph.

SAFETY LOCK FUNCTION
Under any mode, if you pull away the safety key, the machine will stop. The machine cannot work until the safety key is inserted back.

SAFETY KEY
Included with this machine is a red safety key, the machine will not operate unless this is inserted. Its purpose is to immediately stop the machine in the event of an emergency. The computer will display “—” if not correctly attached to the treadmill. The clip on the other end of the safety key must be attached to the user at all times during your workout to ensure the machine stops immediately in the event of an emergency.

POWER SAVE FUNCTION
This product is fitted with a power saving mode which will activate if the Treadmill is inactive for a period of 10 minutes. To restart the treadmill simply press any button.

POWER OFF
You can switch off the power to stop the treadmill at any time, which will not cause any damage.

CAUTION

• We recommend that you maintain a slow speed at the beginning of a session and hold on to the handrails until you become comfortable and  familiar with the treadmill
• Attach the safety key clip to your clothing
• To end your workout safely, press the STOP button or pull out the safety pulling rope, then the treadmill will stop immediately
• In case you must escape the equipment in an emergency situation during exercising , grab the handrails and set both feet on the right and left foot platform beside the running belt

MAINTENANCE AND CARE

PLACE THE TREADMILL ON LEVEL GROUND AND SET IT AT 5-8KPH (3-5MPH) TO CHECK IF THE RUNNING BELT DRIFTS.

IF THE RUNNING BELT MOVES TO THE LEFT, TURN THE BOLTS ON THE LEFT SIDE ¼ OF A TURN CLOCKWISE, THEN TURN THE RIGHT BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT MOVE, REPEAT UNTIL IT CENTRES.

IF THE RUNNING BELT MOVES TO THE RIGHT, TURN THE BOLT ON THE RIGHT SIDE ¼ TURN CLOCKWISE, THEN TURN THE LEFT BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT MOVE, REPEAT UNTIL IT CENTRES.

OVER TIME THE RUNNING BELT WILL LOOSEN. TO TIGHTEN THE BELT TURN THE LEFT & RIGHT SIDE BOLTS ONE FULL TURN CLOCKWISE, CHECK THE TENSION OF THE BELT. CONTINUE PROCESS UNTIL BELT IS THE CORRECT  TENSION. ENSURE TO ADJUST BOTH SIDES EQUALLY TO CORRECT BELT ALIGNMENT.

T-23 TREADMILL

UK: RFE EUROPA LTD. 8 CLARENDON DRIVE, WYMBUSH, MILTON KEYNES, MK8 8ED
+44 (0)800 440 2459 / techsupport@rfeinternational.com
EUROPE: RFE EUROPA. LINPRUNSTRASSE 49, 80335 MUNICH, DEUTSCHLAND
techsupporteu@rfeinternational.com
ES: serviciotecnico@rfeinternational.com / +34 800 600 816
DE: techsupporteu@rfeinternational.com / +49 (0)89 189 39 700
APAC (EXCLUDING AUSTRALIA): RFE ASIA PACIFIC, 26F, 2608-2609, 1 HUNG TO ROAD,
KWUN TONG, KOWLOON, HONG KONG.
techsupportapac@rfeinternational.com / +852 34685027
AUSTRALIA: techsupportaustralia@rfeinternational.com
USA: RFE SPORTING GOODS INC., 445 PLASAMOUR DRIVE, SUITE 1, ATLANTA, GA 30324, USA
techsupportusa@rfeinternational.com / +1 (800) 215 6216

AVUS-10621 220–240V AUSTRALIA, EUROPE AND CHINA
AVUS-10621-120 120V CANADA, USA
AVUS-10621-120 100–120V JAPAN
AVUS-10621-120 127V MEXICO

V1 02/2023
AVUS-10621/AVUS-10621-120

Documents / Resources

| adidas T-23 Bluetooth Treadmill Sweatband Machine [pdf] User Manual
T-23 Bluetooth Treadmill Sweatband Machine, T-23, Bluetooth Treadmill Sweatband Machine, Treadmill Sweatband Machine, Sweatband Machine
---|---

References

• adidas Training Equipment
• adidas Training Equipment
• Product Support | adidas Training
• Kinomap

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>