HOOVER ONEPWR CleanSlate Cordless Spot Cleaner User Guide
- June 15, 2024
- Hoover
Table of Contents
HOOVER ONEPWR CleanSlate Cordless Spot Cleaner User Guide
GETTING STARTED
-
Charge battery until indicator is full. Insert into side of unit. Audible click will be heard.
-
Remove Solution Tank from the unit.
-
Charge battery until indicator is full. Insert into side of unit. Audible click will be heard. Remove Solution Tank from the unit.
-
Turn power on. Unit starts in normal mode to provide optimal runtime and performance
-
For tough stains, press “+” to activate boost mode and increase suction. *Battery indicator will flash red when battery is low.
HOW TO USE
-
Remove any chunks or large debris before using machine. Use preferred tool to suction any excess liquid from the stain.
-
Spray a generous amount of cleaning formula over stain by pressing the trigger behind the tool.
-
Place the tool on the stain and scruh
-
Apply downward pressure on the front of the cleaning tool and pull towards you to lift the stain. Repeat as needed
TOOLS FOR EVERY MESS
7in WidePath Tool
Tackle stairs and larger messes in fewer passes.
Tight Spot Tool
Clean crevices, corners, baseboards and other tough to reach areas.
Hose Rinse Tool
Flush the hose with water to remove any left behind dirt & debris after use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>