Ibiza E-BEAM100 100w Beam Moving Head with White LED User Manual

100W BEAM MOVING HEAD
WITH WHITE LED
Ref. E-BEAM100
MANUAL
Instruction Manual

For more languages, please scan the QR code on the last page

DMX CHANNEL TABLE

8

| ****

Color

| 0–15| White
16–31| Color 1
32–47| Color 2
48–63| Color 3
64–79| Color 4
80–95| Color 5
96–111| Color 6
112–127| Color 7
128-191| Color Wheel clockwise rotation from fast to slow
192-255| Color Wheel counter-clockwise rotation from slow to fast

9

| ****

Gobo

| 0-7| White
8–15| Gobo 1
16-23| Gobo 2
24-31| Gobo 3
32-39| Gobo 4
40-47| Gobo 5
48-55| Gobo 6
56-63| Gobo 7
64-73| Gobo 7 shake from slow to fast
74-83| Gobo 6 shake from slow to fast
84-93| Gobo 5 shake from slow to fast
94-103| Gobo 4 shake from slow to fast
104-113| Gobo 3 shake from slow to fast
114-123| Gobo 2 shake from slow to fast
124-127| Gobo 1 shake from slow to fast
128-191| Gobo Wheel clockwise rotation from fast to slow
192-255| Gobo Wheel counter-clockwise rotation from slow to fast

10

| ****

Prism

| 0-7| Prism off
8-127| Prism on
128-255| Prism rotation from slow to fast

11

| ****

Macro Function

| 0-49| CH1-CH10 valid
50-149| Auto running
150-255| Sound control
12| Reset| 0-240| No function
241-255| Total reset after 5 secons

CONTENTS OF THE CARTON:

• 1 x Moving head
• 1x Mains lead
• 1x omega bracket
• 1x User Manual

UNPACKING INSTRUCTIONS

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present and have been received in good condition. Notify the freight company immediately and retain packing material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

EXPLANATION OF SYMBOLS

| The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electrocution, for example).
---|---
| An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
| The unit complies with UK standards
| For indoor use only
| Protection class I. Requires an earth connection
| Minimum distance between the appliance and other objects
| Don’t stare into the light beam

CAUTION
DO NOT OPEN THE HOUSING SHOCK HAZARD

IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS

• Please read these instructions carefully, they include important information about the installation, usage and maintenance of this product.

• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives this instruction booklet.

• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

• This product is intended for indoor use only!

• It is essential that the device is earthed. A qualified person must carry out the electric connection.

• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.

• The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that no ventilation slots are blocked.

• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size and type.

• Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying handles.

• Maximum ambient temperature (Ta) is 35°C. Do not operate the fixture at temperatures higher than this.

• The surface temperature of the unit may reach up to 120°C. DO NOT TOUCH the housing barehand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or servicing.

• DO NOT OPEN the unit within 5 minutes after switching off.

• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical
  assistance center. Always use the same type of spare parts.

• Don’t connect the device to a dimmer pack.

• Make sure the power cord is never crimped or damaged.

• Never disconnect the power cord by pulling or tugging on the cord.

• Avoid direct eye exposure to the light source while it is on.

• The product is for decorative purposes only and not suitable as a household room illumination.

• The light source of this luminaire is not replaceable. When it reaches the end of its life time, the whole unit must be discarded.

• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

INSTALLATION

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture.
Never stand directly below the device when mounting, removing or servicing the fixture. This fixture may be mounted in any position provided there is adequate room for ventilation.
The LED moving head provides a unique mounting bracket assembly that integrates the bottom of the base, the included ‘omega bracket’ and the safety cable rigging point in one unit.When mounting this fixture on a truss, be sure to use an appropriate clamp with the included omega bracket using a M10 screw fitted through the center hole of the ‘omega bracket’. As an added safety measure, be sure to attach at least one properly rated safety cable to the fixture using one of the safety cable rigging points integrated in the base assembly.

FUSE REPLACEMENT

• With a flat head screwdriver wedge the fuse holder out of its housing.
• Remove the damaged fuse from its holder and replace with exactly the same type of fuse.
• Insert the fuse holder back in its place and reconnect power.
• The fuse is located inside this compartment. Remove using a flat head screwdriver.

FIXTURE LINKING

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all fixtures on a serial data link determines the number of fixtures that the data link can support.

Important : Fixtures on a serial/data link must be daisy chained in one single line. Maximum recommended serial data link distance: 100 meters.
Maximum recommended number of fixtures on a serial data link: 32 fixtures
CABLE CONNECTORS
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

DMX CONNECTOR CONFIGURATION
Termination reduces signal errors. To avoid signal transmission problems and interference, it is always advisable to connect a DMX signal terminator.

CAUTION
Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to check correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.

SETTING UP A DMX SERIAL DATA LINK

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the controller.
2. Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
3.  Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

MASTER/SLAVE FIXTURE LINKING

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on Often, the set up for Master-Slave and Stand-alone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP-switches. Secondarily, the fixtures that follow may also require a slave setting. Please consult the ‘’ Operating Instructions» section in this manual for complete instructions for this type of setup and configuration.

OPERATING INSTRUCTIONS

NAVIGATION THROUGH THE CONTROL PANEL
Access control panel functions using the four panel buttons located directly underneath the LCD Display..

When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press