HiBOOST B1AwKyb5VZL Cell Phone Signal Booster for Truck Installation Guide

HiBOOST B1AwKyb5VZL Cell Phone Signal Booster for Truck

Travel 3.0 Car

Kit Includes

Getting Started

1. Assemble and Mount the Outside Antenna

2. Determine where you would like to set up the outside antenna Usually, the outside antenna is mounted to the roof of the car near the back.
   Note: Please make sure the outside antenna is not placed on the glass. If you cannot make it, please keep the outside antenna as close to the back as possible.

3. Fix the outside antenna
   The antenna has a built-in magnet. You can fix it directly on the metal roof or use the double-side tape in the accessories.

4. Connect the Outside Antenna to the Booster Routing the cable into your car and connect it to the booster.

5. Connect the DC Power Supply to the Booster

6. Place Inside Antenna & Connect the Cable
   Place the inside antenna where you would like to cover signal and connect it to the booster.

7. Download the Signal Supervisor App, register ID and booster.

8. Register an ID first and log in. Add the booster to the device list.

9. Use the Signal Supervisor to help installation

10. The booster will work at best if the gain reaches SOdB. But if you can’t get so, at least ensure the gain on the gauges reaches 46-SOdB. If not, please kindly adjust the position of the inside antenna.

11. Fix the Inside Antenna and the Booster

12. Fix the inside antenna vertically with the provided double-side tape.

13. Fix the booster with the provided Hook & Loop.

14. Enjoy your boosted signal!

Travel 3.0 RV

Kit Includes

Getting Started

1. Assemble and Mount the Outside Antenna

2. Determine where you would like to set up the outside antenna
   Usually, the outside antenna is mounted to a ladder at the top of the vehicle vertically and as high as possible so that it can get a good signal.
   Note: Please make sure the outside antenna stay below the height limit allowed by law.

3. Assemble the outside antenna

4. Insert the cable through the pole and then through the side exit adapter.

5. Screw into place.
   Notes:   The accessories include 2 poles and you can decide to use 1 or 2 depending on the situation.

6. Fix the outside antenna
   Use the provided accessories to fix the outside antenna to the ladder.

7. Connect the Cable to the Outside Antenna
   Connect the booster and the outside antenna with the 26′ cable.

8. Connect the DC Power Supply to the Booster.
   Use power supply or DC power supply.

9. Place Inside Antenna & Connect the Cable
   Place the inside antenna horizontally on a desk or a countertop in the area where you would like to cover signal and connect it to the booster.

10. Download the Signal Supervisor App, register ID and booster.

11. Register an ID first and log in. Add the booster to the device list.

12. Use the Signal Supervisor to help install

13. The booster will work at best if the gain reaches SOdB. But if you can’t get so, at least ensure the gain on the gauges reaches 46~50dB. If not, please kindly adjust the position of the inside antenna.

14. Fix the Inside Antenna and the Booster

15. Fix the inside antenna with the provided double-side tape.

16. Fix the booster with the provided Hook & Loop.

17. Enjoy your boosted signal!

Travel 3.0 Truck

Kit Includes

Getting Started

1. Step 1 Assemble and Mount the Outside Antenna

2. Determine where you would like to set up the outside antenna
   Usually, the outside antenna is mounted to a rearview mirror. It would be great if you could set it as high as possible.
   Note: Please make sure the outside antenna stay below the height limit allowed by law .

3. Assemble the outside antenna

4. Insert the cable through the pole and then through the side exit
   adapter.

5. Screw into place.
   Notes:   The accessories include 2 poles and you can decide to use 1 or 2 depending on the situation

6. Fix the outside antenna
   Use the provided accessories to fix the outside antenna to the rearview mirror_

7. Connect the Cable to the Outside Antenna
   Connect the booster and the outside antenna with the 15′ cable_

8. Connect the DC Power Supply to the Booster.

9. Place Inside Antenna & Connect the Cable
   Please place the inside antenna on the dash or the side of driver’s seat_

10. Download the Signal Supervisor App, register ID and booster.

11. Register an ID first and log in_ Add the booster to the device list.

12. Use the Signal Supervisor to help install

13. The booster will work at best if the gain reaches SOdB But if you can’t get so, at least ensure the gain on the gauges reaches 46~50dB If not, please kindly adjust the position of the inside antenna_

14. Fix the Inside Antenna and the Booster

15. Fix the inside antenna vertically with the provided double-side tape.

16. Fix the booster with the provided Hook & Loop_ Enjoy your boosted signal!

Booster Light Indicators

ALARM| solid blue| normal
solid red| excessive low input voltage
slow flashing blue| slight oscillation
quick flashing red| booster automatically shut off due to strong oscillation/overload
Bluetooth LED| solid blue| bluetooth disconnected
slow flashing blue| bluetooth connected
Wi-Fi LED| solid blue| wifi disconnected
slow flashing blue| wifi connected

Technical Specifications

For more information

Download Signal Supervisor or enter our website. www.hiboost.com .

1. You can download the specific user manual.
2. You can reach our technical support for help.

3150 Premier Drive,Suite 130, Irving, TX 75063
972-870-5666
service@hiboost.com www.hiboost.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>