Tenda 4G05 Wi-Fi N300 4G LTE Router Installation Guide

: June 13, 2024
: Tenda

Table of Contents

Get support and services
Set up the router
Connect clients to the internet
FAQ
Safety Precautions
Technical Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Installation Guide
N300 Wi-Fi 4G LTE Router
4G03 Pro/4G05

Get support and services

https://www.tendacn.com/service/default.html

For technical specifications, user guides and more information, please visit the product page or service page on www.tendacn.com. Multiple languages are available.
You can see the product name and model on the product label.

Set up the router

Insert a Nano SIM card into the slot of the router.
Use the included power adapter to connect the PWR jack of the router to a power source.

All LED indicators light up. Wait a few seconds. The router is connected to the internet when the internet LED indicator ( ) lights solid on.
Tips
If the internet LED indicator ( ) does not light solid on, refer to Q1 in FAQ.

Connect clients to the internet

Connect your wired device, such as a computer, to the WAN/LAN or LAN port of the router using an Ethernet cable.
Connect your wireless device, such as a smartphone, to the Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi Key labeled on the bottom panel of the router.

To further configure the router, such as changing the Wi-Fi name and Wi-Fi key, log in to the web Ul of the router by visiting tendawifi.com on a connected device or download the Tenda WiFi App by scanning the QR code below.
Tips:
If you cannot log in to the web UI of the router, refer to Q2 in FAQ.

http://download.cloud.tenda.com.cn/down/app

FAQ

A1: Try the following solutions: • Check that your SIM card supports LTE or WCDMA. • Check that your SIM card is in your ISP's service area. • Check that your SIM card balance is sufficient. • Start a web browser on the device connected to the router, and access http://tendawifi.com. You will be redirected to the troubleshooting page. Then, perform troubleshooting as prompted on the page. • Confirm with your ISP if you are in a roaming service area. If yes, log in to the web UI of the router and navigate to Internet Settings to enable Data Roaming. If the problem persists, contact our technical support.

Q2: I cannot access the web UI of the router by visiting tendawifi.com. What should I do?

A2: Try the following solutions: If you log in with mobile clients: • Ensure that your wireless device is connected to the Wi-Fi network of the router. • Disable the cellular network of your wireless device. • Clear the cache of your web browser or try again with another web browser. If you log in with computers: • Ensure that the computer has connected to the router properly. • Ensure that the IP address of your computer is 192.168.0.X X ranges from 2 to 254. If not, unplug and replug one end of the Ethernet cable between the router and the computer, and try again. • Clear the cache of your web browser or change another web browser and try again. If the problem persists, refer to Q3 to reset the router and try again.

Q3: How to reset the router?

A3: When the device completes startup, press the RST WPS button for about 8 seconds, and release it when all LED indicators light off and then light up. The router will be reset successfully in about two minutes.

Safety Precautions

Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed. They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.

The device must be horizontally mounted for safe use.
Do not use the device in a place where wireless devices are not allowed.
The mains plug is used as the disconnect device, and shall remain readily operable.
The power socket shall be installed near the device and easily accessible.
Operating temperature: -5°C- 45°C
Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
Do not use the power adapter if its plug or cord is damaged.
Disassembling or modifying the device or its accessories without authorization voids the warranty, and might cause safety hazards.

For latest safety precautions, see Safety and Regulatory Information on www.tendacn.com.

CE Mark Warning
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD.
declares that the device is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.tendacn.com/download/list-9.html

Technical Support

Shenzhen Tenda Technology Co., Ltd.
Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052
Website: www.tendacn.com
E-mail:
support@tenda.com.cn
support.de@tenda.cn (Deutsch)
support.fr@tenda.cn (Frangais)
support.es@tenda.cn (Espanol)
support.it@tenda.cn (Italiano)
support.uk@tenda.cn (United Kingdom)
support.us@tenda.cn (North America Support)