SEALEY BT2020 Vehicle Finder and Battery Monitor Sensor Instruction Manual

BATTERY MONITOR SENSOR & VEHICLE
FINDER
MODEL NO: BT2020.V2

BT2020 Vehicle Finder and Battery Monitor Sensor

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

▲▲ DANGER! BE AWARE , LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION .
FOR THIS REASON, IT VERY IMPORTANT TO READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY, WHILST CONNECTING THIS PRODUCT TO A VEHICLE’S BATTERY.
Follow these instructions and those published by the battery and vehicle manufacturers, and the maker of any equipment you intend to use in the vicinity of the battery. Remember to review warning marks on all products and on engines.
‰ WARNING ! Modern vehicles contain extensive electronic systems.
You are required to check with the vehicle manufacturer, for any specific instructions regarding the use of this type of equipment on each vehicle.
NOTE : No liability will be accepted for damage / injury, where this product is not used in accordance with all instructions.

INTRODUCTION

Displays real time battery power, voltage and temperature. Wireless connection with dedicated app which supports up to 4 devices (IOS & Android compatible). Guide user back to the vehicle by automatically recording the last parking location. Record the route, cost and driving habits of each trip, which can be exported to Excel. Automatically monitor the starting and charging system of the vehicle and notify if abnormal. Compatible with most batteries including lead sealed, AGM and Gel. Supports up to 4 devices. Store historical data in device for up to 30 days.

SPECIFICATION

MODEL NO.: ………………………………………………. BT2020.V2
Voltage Range: …………………………………………………… 6-20V
Average Current: ………………………………………………… 1.5mA
Input Voltage: …………………………………………………….. 6-20V
Voltage Accuracy: ……………………………………(9-16V) ±0.03V
Operating Temperature: ……………………………… -20°C – 40°C
Waterproof: ………………………………………………………….. IP67
Short Circuit Protection: ……………………………………… Built In
Reverse Connection Protection: …………………………… Built In
Physical Dimensions: ………………………….. 55 x 41 x 12.5mm

OPERATION

NOTE: The input voltage range of the device is 6V-20V, which is suitable for 12V lead-acid batteries. Too high input voltage will cause equipment damage.
NOTE: In order to obtain accurate battery temperature, please stick the device on the battery case.
NOTE: When installing the app, all permissions to be obtained must be accessed. If a permission fails to be obtained, some functions cannot operate.
NOTE: Some functions need to allow the app to self-start and run in the background. The app has been optimized for this and will not consume more power. To allow the app to start automatically and run in the background, Allow Background, Allow Self Starting and Auto-Launch needs to be set in the phone. Consult your phone’s instructions for guidance.
4.1. INSTALLING THE DEVICE
4.1.1. Connect the positive tab (red lead) to the positive terminal on the battery. Connect the negative tab (black lead) to the negative terminal on the battery. When removing the device, disconnect the negative terminal before the positive.
4.1.2. Fix the device to the battery case with the supplied double – sided tape.
The device must be attached to the battery case, otherwise the accurate battery temperature will not be obtained. Be careful not to choose a ventilated location, which will affect the battery temperature reading.
4.2. INSTALLING THE APP
4.2.1. Scan the QR code of the product and download the app to your device.
4.2.2. When running the application for the first time, the app will ask for required permissions, all these are necessary (see note above).
NOTE : The Android app obtains the location permission for the wireless scanning function, which is regulated by the Android system.
Disabling this permission will cause the device not to be scanned or wireless scanning is slow. In addition, the track function also needs to obtain the location permission.
NOTE : To run the application, it is necessary to register a login account. Android phones support Google, Facebook or Skype quick registration and login, and iPhones support Apple ID, Facebook or Skype quick registration and login.
4.2.3. To add a device, it is necessary to fill in the device serial number, which can be scanned by bar code or manually filled in. The serial number can be found on the package or shell.
4.2.4. The defaulted device name is the serial number, and it can also be modified manually.
4.2.5. Fill in the fuel consumption according to the average fuel consumption. Incorrect fuel consumption or incorrect fuel price will result in inaccurate calculation of fuel costs.

MAINTENANCE

5.1. Regularly check that the unit is still attached to the battery or an accurate battery temperature will not be recorded.

TROUBLESHOOTING

is turned on, and there are no other phones nearby to connect the device. Restart the wireless or restart the mobile phone. In addition, if the phone wireless is connected with too many wireless devices, it may also cause the wireless not to connect properly.
There is no tracking or parking data.| Confirm that the GPS switch of the phone is turned on.
Confirm that the app has obtained the permission of the location service.
Confirm that the app is running and the device is connected.
Confirm that the “GPS Track Server” in the Settings of the app is turned on.
Confirm that the app can be started by itself and can run in the background.
No Alarm notification| Use settings on the mobile phone and turn on the application notification permission.
Battery power display is inaccurate or no vehicle starting system data?| Suitable for 12V lead – acid and LiFePO4 batteries. If there is no in-vehicle usage data, such as no engine start behaviour, the power may be inaccurate and there is no start data.
The vehicle charging system cannot be tested?| The test needs to be performed while engine running. It supports all ordinary alternators, and does not support smart alternators. If the test still does not work, please check with the vehicle manufacturer whether it is a smart alternator.
The fuel cost statistics are inaccurate?| Check whether the fuel consumption per 100KM and the fuel price are correctly filled in.
The location or journey data is inconsistent.| If the app can’t be self- started and run in the background, the location data cannot be obtained. Modify phone settings to enable self-starUauto-launch.
Need to enter a PIN code for wireless connection?| When wireless turned on, some mobile phones system will automatically list all nearby wireless devices. The wireless connection needs no PIN code. Re-running the app will automatically connect to the device.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

https://qrco.de/bcy2E9

Sealey Group, Kempson Way, Suffolk Business
Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
sales@sealey.co.uk
www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>