tracer T6 Pro GAMEZONE Tra Earbuds Instruction Manual

: June 13, 2024
: Tracer

Table of Contents

tracer T6 Pro GAMEZONE Tra Earbuds
Product Information
Product Usage Instructions
Specification
In the box
Operation Instruction
Documents / Resources

tracer T6 Pro GAMEZONE Tra Earbuds

tracer-T6-Pro-GAMEZONE-Tra-Earbuds-PRODUCT

Product Information

product name	Tracer Gamezone T6 Pro TWS BT Headset
Manufacturer	Megabajt Sp. z oo
Battery capacity	300mAh

Product Usage Instructions

TURN ON:
- Open the charging case, or the earphones will be off.
Bluetooth pairing:
- Enable Bluetooth on your device.
- Select “TRACER T6 PRO” from the available Bluetooth devices.
Controls:
- Single tap: Play/Pause music or answer/end calls.
- Double tap (left earphone): Skip to the next track.
- Double tap (right earphone): Go back to the previous track.
- Triple tap (either earphone): Activate Siri or voice assistant.
- Long press (either earphone): Reject incoming calls.
Charging:
- Place the earphones back into the charging case to charge them.
- The charging case can be charged using a standard USB cable.
- When the charging case’s blue indicator light is flashing, it indicates a low battery level.
- When the charging case’s indicator light is off, it means the case is fully discharged.
Safety Instructions:
- To avoid hearing damage, maintain a moderate volume level.
- Avoid listening to music at loud volumes for extended periods as it may cause permanent hearing damage or deafness.
- Do not use the Tracer T6 Pro headset while driving or in situations where it may be dangerous.

Headset Tracer Gamezone T6 Pro TWS BT Instructions for use

Specification

BT Version: V5.3
Working Range: Up to 10m
Speaker size: φ13mm
Impedance: 32Ω
Mic Type: Silicon Microphone(MEMS Microphone)
Mic Sensitivity: -32dB±3dB
Speaker Power: 20mW*2
S/N Rate: ≥70DB
THD: ≤5%
Frequency Response: 20Hz-20KHz
Playing time: up to 5h
Earphone battery: 35mAh
Charge case battery: 300mAh

In the box

BT Earphone ×2
Charge Cable ×1
Charge Case ×1
Manual ×1
Eartips ×3 sets

Operation Instruction

TURN ON: Open the charging case, or touch and hold the MF button for 5 seconds the earbuds will turn on automatically. And you will hear a prompt voice.
TURN OFF: Put the earbuds into the charging case and close the case, or touch and hold the MF button for 5 seconds the earbuds will turn off automatically. And you will hear a prompt voice.
Connect with Bluetooth : Turn on the device of BT and find “TRACER T6 PRO” to pair.
Short Press: Short Press (Touch) the MF button of the Left Earphone decreases volume. Short Press (Touch) the MF button of the Right Earphone to Increase Volume.
Double Press : Double Press on the M button to Pause/Play Music, Answer incoming calls, and End a call. Press (Touch) the MF button of either earphone for 2 seconds and release to Reject Incoming Call.
Triple Press: Previous track: Short Press(Touch) the MF button of the Left Earphone Triple.
Next track: Short Press (Touch) the MF button of the Right Earphone Triple.
Short hold of the multifunction button for 2 seconds on the left earbud to activate Siri, Short hold again to exit Siri.
Games Mode: Short hold of the multifunction button for 2 seconds on the right earbud to enter the Games Mode, Short hold again to switch to the music mode.
Restore factory settings: When the earphone is turned on but without connection to any BT devices,5 times quickly tap both of the earbuds, the 2 earbuds with LED indicator at the same time, after 3 seconds the earphone will turn off automatically and get restored factory settings,put the earphones back to the case and close case, a once open case both earphones will get connected automatically.

Led Indicator Display

Turn On: The LED light indicator on the earphones will be with a breathing flash in ice blue.
Turn Off: The LED light indicator on the earphones will be off.
TWS connected: The LED light indicator on the host earphone will be with a breathing flash in ice blue. and the subordinate earphone light is off.
BT Connected: The LED light indicator on the earphones is off.
To Charge the Earphone: The LED light indicator on the earphones will be with a breathing flash in ice blue to indicate the battery is being charged, once fully charged, the light will be off.

To Charge the Case:

a. Open the Case, The ice blue LED light indicator on the charging case will light up for 5 then be off (with/without the earphone in the charging case).
b. Close the Case, The ice blue LED light indicator on the charging case will light up for 10 then be off (with/without the earphone in the charging case)
c. When the LED indicator light on the charging case is flashing in blue or does not light up, indicating that the charging case is in low battery or 0% battery

Use safety instructions:

To avoid hearing damage, keep the volume at a moderate level. Avoid listening to music at high volume for a long time, as this may cause permanent damage to your hearing or deafness. Please do not use Tracer T6 Pro when driving, riding a bicycle, crossing the road, etc. where your concentration is required. Note: If you use the headset while watching a video, the audio and video may be slightly out of sync.
After charging is complete, please unplug the charging cable from the product to avoid leaving the product in a charging state for a long time. Do not use a charger that exceeds the rated voltage and current of the headset (5V/1A) to charge the headset.
If the output voltage and current of the charger exceed the specific standards, this will cause serious damage to the product, and the product warranty will be validated at the same time.
Maximum Transmitter Power (E.I.R.P) ≤20 dBm
The range in which the device operates: is 2400 MHz – 2483,5 MHz
Download the instruction manual from http://tracer.eu/TRASLU47284
Follow the downloaded instruction manual.
The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging, or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing.
For more information on recycling electronic and electrical equipment, please contact your local authorities, waste disposal services, and the place where you purchased this product.
The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, and waste equipment.
At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.
Producent: Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa
http://tracer.eu/TRASLU47284