Rebel LUT0044 Gas Soldering Iron User Manual
- May 15, 2024
- Rebel
Table of Contents
Rebel LUT0044 Gas Soldering Iron
Specifications
- Model: LUT0044
- Manufacturer: Lechpol Electronics Leszek Sp.k., China
- Address: ul. Garwoliska 1, 08-400 Mitne
Product Usage Instructions
Safety Instructions
Before using the gas soldering iron, please read and understand the safety instructions provided in the user manual.
Components:
- Soldering tip fixture
- Soldering tip
- Continuous flame switch
- Gas volume switch
- Flame extinguish button
- Lock button
- Ignition button
- Gas fill valve
Intended Use:
The soldering iron can be used as a portable soldering iron, hot-air tool, or flame burner.
Operation:
- Set the gas volume switch to position 2 or 3.
- Press and hold the lock button, then press the ignition button.
- Switch the continuous flame switch to the right position and press the ignition button.
- Adjust the gas volume switch to the proper position.
- To extinguish the flame, press the flame extinguish button and set the continuous flame switch to the left position.
Note: Always ensure the soldering iron has completely cooled down before replacing the tip. Without the tip, the soldering iron functions as a hot-air tool. Without the tip fixture, it acts as a flame burner.
Frequently Asked Questions
- Q: Can I use this soldering iron for electronics projects?
- A: Yes, the soldering iron can be used for various electronics projects as it provides precise control over the heat.
- Q: How do I refill gas in the soldering iron?
- A: To refill gas, locate and use the gas fill valve as per the instructions provided in the user manual.
Product Overview
Intended use
The soldering iron can be used as portable soldering iron, hot-air or flame burner.
Filling
- Before filling the tank, make sure that the soldering iron has completely cooled down.
- Set the gas volume switch to OFF position.
- Use only 100% butane.
- Place the soldering iron with the gas fill valve facing upward.
- Insert the gas canister tip to the gas fill valve and press it.
- Take out the gas canister after the tank has been filled.
Operation
- Set the gas volume switch to 2 or 3 position.
- Press and hold the lock button, then press the ignition button.
- Switch the continuous flame switch to right position and press the ignition button.
- Set the gas volume switch to proper position.
- To put the flame down, press the flame extinguish button and set the continuous flame switch to left position. Before replacing the tip, make sure that the soldering iron has completely cooled down. Without the tip, the soldering iron works as a hot-air. Without the tip fixture, the soldering iron works as a flame burner.
SPECIFICATION
- Tip temperature range: 200°C – 500°C
- Maximum flame temperature: 1300°C
- Working time (with full tank): approx. 30 mins
- Tank capacity: 17 ml / 2,8 g
- Length (with tip): 25 cm
- Set weight: 0,5 kg
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>