YAKIMA 1036122A OpenRange Leg Kit Instructions

YAKIMA 1036122A OpenRange Leg Kit

Product Information

• Carrying Case: 1x
• Leg: 4x
• Base: 1x
• Knob: 2x

The OpenRangeTM is a versatile product designed for outdoor activities. It comes with a carrying case for easy transportation. The product includes 4 legs, a base, and 2 knobs for stability and support.

Product Usage Instructions

1. EXTEND THE LEGS
   • Remove the leg kit from the carrying case. Loosen the knob and extend each leg. Ensure that each leg is extended equally and that the knob is seated in one of the 3 slots. Once extended, fully retighten the knob.
2. INSTALL THE LEGS
   • Insert each of the 4 legs into the designated receivers. Loosen the knob if necessary and ensure that the post of the knob is within the channel on the receiver. Once inserted, tighten the knobs fully to secure the legs in place.
3. PLACE THE OPENRANGETM ONTO THE LEG KIT
   • Position the OpenRangeTM onto the Leg Kit. Center its placement and it will seat itself securely.
4. SECURE THE OPENRANGETM TO THE LEG KIT
   • Install and fully tighten the stabilizing knobs located at the rear of the OpenRangeTM to ensure stability and prevent tipping over.

Note: It is important to install the stabilizing knobs before opening the door of the OpenRangeTM to prevent tipping.

Recommended Accessories:

Visit Yakima.com or your preferred dealer to purchase or research the following accessories:

• CookOutTM (#8007452)
• OpenRangeTM (#8007447)
• OpenRangeTM Wood Side Table (#8007451)
• OpenRangeTM Metal Side Table (#8007457)

For further assistance or support, please visit Yakima.com/support. or contact Yakima Australia Pty. Ltd at 1800-143-548.

CONTENTS

HOW TO USE

1. EXTEND THE LEGS
   • Remove the leg kit from its carrying case. Loosen the knob as shown and extend the leg. Make sure the knob is seated in one of the 3 slots and that each leg is equally extended. Fully retighten the knob.
2. INSTALL THE LEGS
   • Insert each of the 4 legs into the receivers as shown. Loosen the knob as necessary, and be sure the post of the knob is within the channel on the reciever, then tighten the knobs fully.
   • CAUTION: The OpenRange™ will tip over when the door is opened if the stabilizer knobs are not installed.
3. PLACE THE OPENRANGE™ ONTO THE LEG KIT
   • Place the OpenRange onto the Leg Kit. Center its placement and it will seat itself.
   • WARNING: Do not open the door until you’ve installed the stabilizing knobs in the next step.
4. SECURE THE OPENRANGE™ TO THE LEG KIT
   • Install and fully tighten the stabilizing knobs at the rear of the OpenRange as shown.

RECOMMENDED ACCESSORIES

Visit Yakima.com. or your preferred dealer to purchase or research these accessories.

CONTACT

• www.yakima.com

YAKIMA PRODUCTS, INC.

• 4101 KRUSE WAY
• LAKE OSWEGO, OR
• 97035-2541
• USA
• 888.925.4621
• yakima.com/support.

YAKIMA AUSTRALIA PTY. LTD

• 17 Hinkler Court
• Brendale
• QLD 4500
• Australia
• 1800-143-548
• Instruction #1036122A-Page 5 of 5

References

• Yakima
• Yakima

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>