YAKIMA 8006112 Baseline Mounting Kit Instruction Manual
- June 12, 2024
- YAKIMA
Table of Contents
YAKIMA 8006112 Baseline Mounting Kit Instruction Manual
INSTRUCTION
PAD NUMBER:
CLIP NUMBER:
Look at the notes that apply to your vehicle
If your vehicle doesn’t appear here go to yakimatech.com
| |
---|---|---
| MAC LBS| | | | M1| M2
| P1| T1| M3| M4| P2| T2
| | | | | inches| inches| | | | inches| |
-FORD– Taurus 4dr 1996-1999| 165| BC123| B84| 4| 34 1/2| 7| A| 2| 3| 32| C| 2
–KIA– Soul 5dr 2010-2013| 165| BC112| B39| 3| 39 7/8| 11 5/8| A| 2| 30 3/4|
32| B| 2
READ THE NOTE THAT APPLY TO YOUR VEHICLE
- 2 – HullRaiser and HighRoller require one set of MightyMount 39H (PN 8003539) to be compatible with Yakima CoreBar, JetStream bars and FX systems.
- 5-HullyRollers, MultiMount, and Mako Saddles require one set of MightyMount 39H (PN 8003539) per pair to be compatible with Yakima CoreBar, JetStream bars and FX systems.
- 14 -Using Yakima RoundBars with Yakima BaseLine, TimberLine, SkyLine, Ridgeline, or SightLine towers will require the purchase of RoundBar SL Adapter (PN 8003536) sold separately.
- 54 -Caution! when open, sunroof or panoramic roof may interfere with some accessories.
- 81 – All loads extending beyond the length of the roof (except cargo boxes) mustbe secured to both the front and rear of the vehicle, in addition to the rack.
- 82 -SideWinder (Tandem Bike Mount) is compatible with Yakima RoundBar only.
- 103 -Please check your vehicle’s front bar to hatch measurement as well as the ShowBoat 66″ instructions, found here http://assets.yakima.com/Product/instructions/8004068/1, to ensure compatibility with your target boat weight, roller extension, and vehicle.
- 109- Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap.
- 110- If your vehicle is equipped with a sunroof or panoramic glass roof, prior to operation, ensure adequate clearance exists with roof rack and/or accessories installed.
- 117 -For use with with your LockNLoad platform, this application requires 2 pairs of LockNLoad Crossbar Clamps PN 8005039.
- 132 – Any load/mount extending beyond the rear hatch seam may cause interference.
- 191 – Limited to 2 surf/sail/paddleboards. Boards must be stacked – NEVER carry side-by-side.
- 604 – RoadShower SM and MD can accommodate crossbar spreads of 24″ – 50″. The distance from the front or rear clamp to the end of the shower must not be greater than 30″. Do not mount RoadShower outboard of tower.
- 607- RoadShower LG can accommodate crossbar spreads of 32″ -78″. The distance from the front or rear clamp to the end of the shower must not be greater than 30″ Do not mount RoadShower outboard of tower.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>