YAKIMA BaseClip 144 Roof Rack Fit Kits and Clamps Instruction Manual
- June 12, 2024
- YAKIMA
Table of Contents
BaseClip 144
BaseClip 144 Roof Rack Fit Kits and Clamps
PAD NUMBER:
CLIP NUMBER:
Look at the notes that apply to your vehicle.
If your vehicle doesn’t appear here go to
yakimatech.com
BaseClip Notes
NOTES
READ THE NOTES THAT
APPLY TO YOUR VEHICLE:
2 – HullRaiser and HighRoller require one set of MightyMount 39H (PN 8003539)
to be compatible with Yakima CoreBar, JetStream bars and FX systems.
5 – HullyRollers, MultiMount, and Mako Saddles require one set of MightyMount
39H (PN 8003539) per pair to be compatible with Yakima CoreBar, JetStream bars
and FX systems.
14 – Using Yakima RoundBars with Yakima BaseLine, TimberLine, SkyLine,
RidgeLine, or SightLine towers will require the purchase of RoundBar SL
Adapter (PN 8003536) sold separately.
54 – Caution! when open, sunroof or panoramic roof may interfere with some
accessories.
69 – Visit https://yakweb-assets.s3.amazonaws.com/HatchClearance.pdf for rear
hatch clearance information regarding cargo boxes.
81 – All loads extending beyond the length of the roof (except cargo boxes)
must be secured to both the front and rear of the vehicle, in addition to the
rack.
82 – SideWinder (Tandem Bike Mount) is compatible with Yakima RoundBar only.
98 – ShowDown requires crossbars one size larger than the recommended minimum
for adequate vehicle side clearance on this application.
103 – Please check your vehicle’s front bar to hatch measurement as well as
the ShowBoat 66” instructions, found here
http://assets.yakima.com/Product/instructions/8004068/1, to ensure
compatibility with your target boat weight, roller extension, and vehicle.
109 – Always be sure to tie down your SUP as per instructions. SupPup and
SupDawg require using nose tie down strap.
110 – If your vehicle is equipped with a sunroof or panoramic glass roof,
prior to operation, ensure adequate clearance exists with roof rack and/or
accessories installed.
132 – Any load/mount extending beyond the rear hatch seam may cause
interference.
144 – Roof mounted antenna may need to be removed to prevent interference with
long loads, boxes.
187 – Boa and ForkChop bike mounts will not work on this application due to
crossbar spread limitations.
191 – Limited to 2 surf/sail/paddleboards. Boards must be stacked – NEVER
carry side-by-side.
604 – RoadShower SM and MD can accommodate crossbar spreads of 24” – 50”. The
distance from the front or rear clamp to the end of the shower must not be
greater than 30”. Do not mount RoadShower outboard of tower.
607 – RoadShower LG can accommodate crossbar spreads of 32” – 78”. The
distance from the front or rear clamp to the end of the shower must not be
greater than 30”. Do not mount RoadShower outboard of tower.
1035757_2022-11-29
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>