CTA PAD-PCGKA7L Protective Case Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-PCGKA7L Protective Case
Features
INSTRUCTIONS
If your tablet has a previously installed screen protector, please remove it before continuing.
How to insert the tablet into the case
- Remove the external silicone sleeve by peeling it away from the internal hard case
- Gently apply pressure to the small clips (as indicated by the arrows) and unclip all four sides. Once all the sides are unclipped, the internal hard case will open.
- Insert the iPad into the rear cover.
- Once the iPad is inside the rear cover, place the internal front cover on top and gently clip all four sides into position.
- Reinstall the external silicone rubber sleeve.
How to flip out kickstand
- Locate the kickstand at the case rear and fold it out underneath the strap.
- Display tablet at desired viewing angle.
- Press the kickstand back in to return to handheld mode.
How to use in handheld
- Identify velcro hand-strap and adjust to fitted size.
- Insert your hand as shown and you’re ready for mobile setup.
- 36 Taaffe Place Brooklyn, NY 11205
- support@ctadigital.com
- 778-991-0169
- www.ctadigital.com
Documents / Resources
| CTA
PAD-PCGKA7L Protective
Case
[pdf] Instruction Manual
PAD-PCGKA7L Protective Case, PAD-PCGKA7L, Protective Case, Case
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>