hama 00176633 WiFi LED Strip Light Instruction Manual

hama 00176633 WiFi LED Strip Light

Product Information: WiFi LED Strip, 5m

Operating Instructions
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

• Risk of electric shock : This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
• Warning: This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
• Note: This symbol is used to indicate additional information or important notes.

Explanation of Symbols Used on the Product Label

• Non-dimmable: The lamp is not suitable for use with a conventional dimmer.
• Electrical device of safety class II : Protection against electric shock thanks to reinforced or double insulation of live parts.
• Only use in a dry environment.

Safety Instructions

• Note : The light source for this light is replaceable.
• Note : The adapter for this light can be replaced.
• Warning : Never look straight into the light source and do not aim its beam of light straight into the eyes of other people or animals. This could damage your/their eyes.
• Risk of electric shock
• Warning

Product Characteristics
The light can change to various colors, such as blue, red, green, etc.

Commissioning

1. Connect the WiFi LED strip.
2. Press “Connecting Now” on the controller.
3. Once connected, the message “Done” will appear.
4. The LED strip has been successfully added.

A detailed description of the Hama Smart Home App and the full range of functions can be found in our App Guide at: www.hama.com -> Item number -> Downloads -> App Operating Instructions.

Setting Options
The following settings can be made in the app

1. Colour: Open the RGB colour settings tab.
2. White: Open the Light settings tab.
3. Brightness slider: Set the preferred brightness here.
4. Colour slider: Set the preferred colour here.
5. On/Off switch: Switch the light on or off with the press of a button.
6. Light: Open the Light settings tab. You can select colour and brightness settings here.
7. Scenario: Open the Colour scenarios tab. Customised light settings can be stored here and selected at the press of a button.
8. Timeline: Create time-controlled programmes here.
9. More: For extended usage options, scenarios can be created in the app. (See Section 8 and App Guide)

Controller Settings
The following settings can be made on the controller

1. On/Off switch: Switch the light on or off with the press of a button.
2. Scenario: Static and dynamic scenes can be selected here at the press of a button.
3. Brightness slider: You can set the preferred brightness here with a long press.

Extended Usage Options with Scenarios
Scenarios and automated sequences, which can be created in the app in the Smart scenarios section, can be used to create many combination and usage options for these products, depending on the Smart Home products you have installed. Programming is always via the app (see Section 4 of the App Guide) and will be offered/suggested to you on an individual basis.

Standard Usage Option

Operating Instructions

Thank you for choosing aHama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

• This symbol indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
• This symbol is used to indicate safety instruction sort draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Explanation of symbols used on the product label

**| Non- dimmable.**

The lamp is not suitable for use with a conventional dimmer.

---|---
**| Electrical device of safety class II. Protection against electric shock thanks to reinforced or double insulation of live parts.
**| **** Only use in a dry environment.

Package contents

• 1xLED strip
• 1xquick-start guide
• 1xLED driver
• 1xLED controller

Safety instructions

• The product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• Do not drop the product and do not expose it to any major shocks.
• Only use the article under moderate climatic conditions.
• Do not operate the product out side the power limits given in the specifications.
• Do not use the product in the packaging or in rolled-up state.
• Do not modify the product in any way. Doing so voids the warranty.
• Children must not playwright the device. Children may not clean the product or perform user maintenance without supervision.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not use the product in areas in which electronic products are not permitted.
• Donot bend or crush the cable.
• Take carenot to kink the product. This can cause damagetothe product.
• Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
• The product must only be operated on a supply network asdescribed on the type plate.
• Do not open the device or continue to operate it if it becomes damaged.
• Not suitable for operation with dimmers, electrical switches, photo cells, time switches or twilight switches.
• Aswith allelectricalproducts, this device should be keptout of the reach of children.
• Route allcables so that thereisnorisk of tripping.
• Always pulldirectly on the plug when disconnecting the cable, never on the cable itself.

Warnung

• The device may only be operated on a230 V50HzACvoltage network. Work on the 230 Network must only be carried out by an electrician certified in your country. The applicable accident prevention regulations must be adhered to.
• Toavoid an electric shock from the device, please disconnect the mains voltage (switch off the automatic circuit breaker). Failure to comply with the installation instructions can cause fires rother hazards.

Note
The light source for this light is replaceable.

Note
The adapter for this light can be replaced.

Warning
Never look straight into the light source and do not aim its beam of light straight into the eyes of other people or animals.
This could damage your/their eyes.

Risk of electric shock

• Do not open the product and do not operate it if it is damaged, if smoke, a strange smell or loud noises are coming from it. Immediately contact your dealer or our service department (see item “Service and Support”).
• Donot use the product if the
• AC adapter,the adapter cable or the mains cable aredamaged.
• Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Warning

• Only operate the product from anapproved socket that is connected to the public power supply.The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch if this is not available, unplug the power cord from the socket.
• If using amultisocket power strip, make sure that the to tall power consumption of all connected devices does not exceed the socket strip’s maximum throughput rating.
• If you walnut be using the product for a prolonged period, disconnect it from mains power.

Product characteristics

This smart light is useful for accent lighting, effect lighting or for creating personal lighting atmospheres. Youcan choose from 16 million different colours. Other setting options include: Switching On/Off and stepless dimming.

The following voice commands can be used

• Switch On /Off -“Alexa /OK Google, switch the light on /off.”
• Dim to X%-“Alexa /OK Google, reduce the light to X%”.
• Colour choice : “Alexa /OK Google, switch the light to blue.” (or red, green, etc.)

Commissioning

• Download the Hama Smart Home app from the Apple App Store or Google Play.
• Open the Hama Smart Home app
• The first time you use the app, you need to register and create anew account. If you already have an account, log in with your access details
• Connect the garden spotlight to aproperly installed socket of protection class IP44 or higher.
• The garden spotlight starts to flash quickly. If it does not, the spotlight must be disconnected from and reconnected to the power supply three times in succession.
• Open the app and sign in.
• Press the + in the top right-hand corner to add anew device.
• Choose Lamps from the list.
• Next enter your WiFi passwordand confirm with “Next”.
• Now confirm thatthe lamp is flashing quickly by ticking “Next step”and clicking on “Next”.
• Your light is now connected.
• Once the connection is successful, the light stops flashing quickly and the app confirms that your light has beenconnected. Youcan now assign it adifferentname if you wish.
• Click Finish to end the process.
• You can now control the light.

Note
A detailed description of the Hama Smart Home App and the full range of functions can be found in our
App Guide atwww.hama.com -> Item number -> Downloads
-> App Operating Instructions

Setting options
The following settings can be made in the app

brightness settings here.
7| Scenario| Open the Colour scenarios tab. Customised light settings can be stored here and selected at the press of a button.
8| Timeline| Create time-controlled programmes here.
9| More| You can select various programs here

• Countdown: once the set time has elapsed, the light is automatically switched off.

Forextended usage options, scenarios can be created in the app.(See Section 8and App Guide)

The following settings can be made on the controller

of a button.
3| Brightness slider| You can set the preferred brightness here with a long press.

Extended usage options with scenarios
Scenarios and automated sequences, which can be created in the app in the “Smart scenarios” section, can be used to create many combination and usageoptionsfor these products, depending on the Smart Homeproducts you have installed.
Programming is always via the app (see Section 4ofthe App Guide) andwill be offered /suggested to you on an individual basis.

Standard usage option

Extended usage option

Warranty disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

RF exposure information

• This device complies with the EU requirements for limiting the exposureofthe general public to electromagnetic fields by meansofhealth protection.
• The device complies with RF specifications provided it is used 20 cm away from the body.

Declaration of conformity

Hama GmbH &CoKGhereby declares that the radio equipment type [00176633] is incompliance with Directive 2014/53/EU. The fullest of the EU declaration of conformity is available at the following Internet address
https://uk.hama.com 00176633

Downloads

Technical data

50/60 Hz

Frequency band/ frequency bands| 2,4 GHz
Maximum radio- frequency power transmitted| ****

< 100 mW

Hama GmbH &CoKG 86652 Monheim /Germany

• Service &Support
• www.hama.com
• +49 9091 502-0

Raccolta Carta
“Googleand Google Play are trade mark so f Google LLC.”
Allister and sari trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general term sof delivery and payment are applied.

References

• hama.com
• Offizieller Hama Onlineshop | Hama DE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>