RCI PCN2112 Push Button With Pneumatic Time Delay Instructions
- June 13, 2024
- RCI
Table of Contents
RCI PCN2112 Push Button With Pneumatic Time Delay
Product Information
The product is a push-button switch with a pneumatic time delay. It is designed for access control applications and electrical installations. The switch has a brass adjustment screw for time delay adjustment.
Product Usage Instructions
- To adjust the time delay, use your fingers to turn the brass adjustment screw.
- Turn the screw clockwise to increase the delay or counterclockwise to decrease it.
- Time Adjustment Procedure:
- Locate the brass adjustment knob and the set screw that locks it.
- Using the supplied Allen wrench, loosen the set screw.
- Turn the brass adjustment knob to set the desired delay time plus 5 seconds.
- Gently tighten the set screw to lock the brass adjustment knob in place.
- Note: Once the set screw is tightened, tolerances in the switch will change, shortening the delay by approximately 5 seconds.
- It is important to note that time delays are approximate and can be affected by environmental factors.
- The switch may need to be installed with the adjustment screw facing up or down to achieve a longer delay for sufficient egress time.
Timer Life: The switch has a lifespan of 1 million operations.
Installation:
- The Pushplate 120 should be mounted in a single-gang electrical box using two screws.
- If using Allen type mounting screws, ensure they are fully lined up and securely fastened.
Typical System Control Wiring Diagrams:
- Electromagnetic Lock, Normally Closed Circuit
- Electric Strike, Normally Open Circuit
- Electromagnetic Lock, Normally Closed Circuit
- Electric Strike, Normally Open Circuit
- Product Code: IS991
- Manufacturer: SECURITY PRODUCTS
- Model Number: PCN2112 R01-22GR
SWITCH INFORMATION
Time Adjustment Procedure:
- Use your fingers to turn the brass adjustment screw.
- Turn clockwise to increase the delay
- Turn counterclockwise to decrease delay.
- Like all pneumatic switches, time delays are approximate and can be affected by environmental variables. If in doubt, leave a longer delay to allow sufficient egress time.
The adjustment screw may be facing up or down.
SPECIFICATIONS
SPECIFICATIONS
TIME RANGE| Standard and Narrow 1 sec to 45 sec +/- 15 %
REPEAT ACCURACY| +/- 5 % @ 72° F (22° C)
SWITCH RATING| 5 Amp @ 125 VAC
TEMPERATURE RANGE| -17° F to +120° F (-27° C to +49° C)
TIMER LIFE| 1 Million operations
HARDWARE INSTALLATION
- The 991 mounts in a single-gang electrical box with two screws. Slotted screws require a standard screwdriver. Carefully line up these screws with tabs in the electrical box and tighten them.
- The 991 narrow pushbutton includes a 1/4″ filler plate for use in installations as required.
TYPICAL SYSTEM CONTROL WIRING DIAGRAMS
ELECTROMAGNETIC LOCK, NORMALLY CLOSED CIRCUIT
ELECTRIC STRIKE, NORMALLY OPEN CIRCUIT
Contact Information
© 2022 dormakaba Canada Inc
- Website: www.dormakaba.us.
- Phone: 1.800.265.6630
- Fax: 1.800.482.9795
- E-mail: sales_RCI@dormakaba.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>