RCI OFF ROAD FG-00482 24+ Toyota Tacoma Lower Link Skids Installation Guide
- August 27, 2024
- RCI OFF ROAD
Table of Contents
RCI OFF ROAD FG-00482 24+ Toyota Tacoma Lower Link Skids
Specifications
- Product Name: RCI 24+ Tacoma Shock Mount Skid Plate
- Material: Steel
- Compatibility: Toyota Tacoma
- Manufacturer: RCI Metalworks
Product Usage Instructions
Installation Steps
- Unpack and verify all components and hardware.
- Remove wheels and tires from the rear axle for easier installation.
- Hold the RCI 24 Tacoma lower link skid plate up to the lower trailing arm mount on the underside of the rear axle.
- Insert carriage bolts into the square holes on the vertical flange of the skid plate from the differential side towards the shock mount side.
- Loosely thread the included flat washer, split washer, and nut onto the carriage bolts.
- Align the rear flanges of the skid plate with the rear of the mount and tighten all hardware.
- Repeat steps 3-6 for the remaining trailing arm mount on the opposite side of the vehicle’s rear axle.
Enjoy your new RCI protection! Share your installation on social media to show off your new product!
FAQ
Q: Can I install the skid plate without removing the wheels and tires?
A: While removing the wheels and tires can make the installation process easier, it is not strictly necessary, and installation can be performed with them on the vehicle.
Q: What tools are recommended for installation?
A: It is recommended to use hand tools for installation as impact wrenches may cause damage if over-torqued.
Q: How can I contact RCI Metalworks for support?
A: You can visit their website at www.rcimetalworks.com, email them at sales@rcioffroad.com, or call 970-797-3089 for support.
INFORMATION
INSTALLATION STEPS
Use hand tools, impact wrenches may cause damage if over-torqued.
- Begin by unpacking and removing all components and hardware. Please verify that all hardware, components, and mounting components are present. Please reference your original order invoice and verify all items are accounted for.
- a. Removing the wheels and tires from the rear axle will make the installation process significantly easier; however, it is not strictly necessary, and installation can be performed with the wheels and tires on the vehicle and the vehicle
- Hold one of the RCI 24 Tacoma lower link skid plates up to the lower trailing arm mount on the underside of the rear axle.
- Insert an included carriage bolt into each of the square holes on the vertical flange of the RCI lower link skid plate. Insert the carriage bolts from the differential side towards the shock mount side.
- Loosely thread the included flat washer, split washer, and nut onto the carriage bolts.
- Align the rear flanges or the RCI lower link skid plate with the rear of the mount as shown and tighten all hardware.
- Repeat steps 2-5 for the remaining trailing arm mount on the opposite side of the vehicle’s rear axle.
Enjoy your new RCI protection!
- Share your new install with us on social media! We love seeing our products out in the wild!
- www.rcimetalworks.com
- sales@rcioffroad.com
- 970-797-3089
- REV: 1 9/29/2022
Disclaimer:
- The products sold by RCI Metalworks are intended for off-road use only, should not be modified, and are for use only on the vehicle(s) specifically stated.
- RCI Metalworks makes no warranties express or implied, including of fitness for a particular purpose or merchantability. RCI Metalworks will not be liable for any damages arising out of the use or misuse of its products.
- It is the customers’ responsibility to ensure the products are safely and properly attached to the vehicle, and all products should be installed by trained professionals.
- We strive to maintain extremely high-quality standards; however, all RCI Metalworks products are individually handcrafted, may vary slightly, and may contain minor imperfections.
- Due to the nature of raw aluminum, the material may have minor scratches and other blemishes caused by the manufacturing process, especially on the back side of the product.
- RCI Metalworks is constantly seeking to improve its products and reserves the right to make changes to any product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>