hama D3223861 UK Power Strip User Manual

: June 13, 2024
: Hama

Table of Contents

Explanation of warning symbols and notes
Package contents
Safety instructions
USB operation
Troubleshooting
Care and maintenance
Warranty disclaimer
Technical data
Documents / Resources

Power Strip
Operating Instructions
D3
223861
223862

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in asafe place for future reference.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates arisk of electric shock from touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

Power strip
These operating instructions

Safety instructions

Use the product only for the intended purpose.
Donot operate the product outside the power limits specified in the technical data.
Protect the product from dirt, moisture and overheating and use it in dry environments only.
Donot use the product in a damp environment and avoid splashing water.
Donot continue to operate the product if it is visibly damaged.
Donot bend or crush the cable.
Donot drop the product and do not exposeitto any major shocks.
Always pulldirectly on the plug when disconnecting the cable, never on the cable itself.
As with all electrical products, this device should be kept out of the reach of children.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Donot modify the product in any way.Doing so voids the warranty.
The product is intended for private, non commercial use only.
The product is intended only for use inside buildings.
Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Only use the article under moderate climatic conditions.
Donot use the product in areas in which electronic products arenot permitted.
Route allcables so that thereisnorisk of tripping.
Never connect multiple units of this product in series.
The product must only be operated on asupply network as described on thetype plate.

Risk of electric shock

Donot open the device or continue to operate it if it becomes damaged.
Donot use the product if the AC adapter, the adapter cable or the mains cable are damaged.
Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Warning

Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch –if this is not available, unplug the power cordfromthe socket.
If using a multi-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum through put rating.
If you will not be using the product for a prolonged period, disconnect it from mains power.

USB operation

Warning –Connection of devices

Before connecting adevice, check whether it can be adequately supplied with the charger’s current delivery.
Ensure that the total output of all the connected devices does not exceed 17 W.
Note the instructions in your device’s operating manual.

Note -Power Delivery

Plug & GO: no additional software required, simply plug in and start: Thanks to Power Delivery, the voltage and power are adjusted automatically.
Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery) function.
If you have a large number of PD-enabled devices with different firmware updates, it may be that the function is not fully supported.

Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:

Connect your device to aUSB charging port using asuitable USB cable.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.

Troubleshooting

The socket is not live. Check the domestic fuse.
Changing the fuse:

Prise out the mains plug cover (10) using the cutouts (11) by means of a suitable screwdriver.
Remove the fuse (12) and replace it with a new one.
Reattach the mains plug cover (10).

hama D3223861 UK Power Strip

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents.
Ensure that no water is able to enter the product.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

Mains connection	250 V~/13A
Connected load	max. 3250 W
Model identifier	D3223861 /D3223862
Input voltage	250 V
Input AC frequency	50 Hz
Output voltage /output current / power output	USB-A: max. 18W

5V DC /3A
9V DC /2A
12V DC /1,5A
USB-C: max. 20W
5V DC /3A
9V DC /2,2A
12V DC /1,67A
USB-A-C: max. 17W
5V DC /3,4A
Max. current strength| 13 A
Size| 6.3 x25.4 mm

All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

Hama GmbH & Co KG
86652 Monheim /Germany
Service & Support
**[www.hama.com](http://www.hama.com)
+49 9091 502-0 https://www.gso.org.sa/gcts/p/56126
Hama Gulf FZE, LB 19 2505, Jafza View 19,
Downtown Jebel Ali, P. O
Box:262174, Dubai, UAE.
D3223861_D3223862/10.23**