CAVIUS 6001 Smart Alarm Hub Instruction Manual
- June 13, 2024
- CAVIUS
Table of Contents
CAVIUS 6001 Smart Alarm Hub
Product Information
| Product Number | 6001 |
|---|---|
| Product Name | CAVIUS HUB |
| Device Type | Hub with wireless interlink |
| Usage | Designed for installation in private homes together with the |
CAVIUS Wireless Family range
Installation Position| The hub has a N45 magnet mounted inside, which snaps
the hub
onto a metal bracket. The metal bracket can be mounted on the wall
by double sided tape or a screw and plug.
Product Dimensions| H: 60 mm x W: 60 mm x D: 12 mm
Product Weight| Base hub weight with RJ45 Ethernet cable: 30 g
Operations AC/DC| 110 / 240V AC to USB 5V DC (supplied)
Interlink Frequency| 868 MHz
Signals| Transmits RF signals to the CAVIUS Wireless Family on open and
close status
Visible Indicator| CAVIUS logo lights up green when the power is on. It will
start
flashing when the hub is powered up. If something is wrong with
internet or power connection, it will continue to flash.
Warranty| 10 years
Operating Humidity| Up to 90% RH non-condensing
Storage Humidity| Up to 93% RH non-condensing
Contact| www.cavius.com
Manufacturer| Carrier Fire & Security Danmark A/S
Product Usage Instructions
To use the CAVIUS HUB, please follow the instructions below:
- Ensure that the included power supply is connected to the hub.
- Position the hub in a suitable location within your private home.
- If using the metal bracket, mount it on the wall using double-sided tape or a screw and plug.
- Attach the hub to the metal bracket by aligning the N45 magnet inside.
- Connect the hub to the CAVIUS Wireless Family range devices for wireless interlinking.
- Ensure the hub is powered on. The CAVIUS logo will light up green indicating power.
- If the hub is powered up, the CAVIUS logo will start flashing.
- If the CAVIUS logo continues to flash, check the internet or power connection for any issues.
- The hub will transmit RF signals to the CAVIUS Wireless Family on open and close status.
Please refer to the user manual for more detailed instructions and troubleshooting information.
FEATURED
PRODUCT DATA
DEVICE TYPE:
Hub with wireless interlink.
USAGE:
Designed for installation in private homes together with the CAVIUS Wireless
Family range.
FUNCTION
The hub is connected to the router through a RJ45 Ethernet cable (supplied). CAVIUS hub will enrol and communicate with CAVIUS Wireless Family devices through the CAVIUS App.
- Choose a name of the hub (e.g. your house name, adress etc.)
- Name your devices (such as living room smoke alarm, entry door or kitchen heat alarm etc.)
- Alarm signal notification through the CAVIUS App
- Test all the connected devices from the App and push message when a device is tested
- Battery fault notification from CAVIUS devices
- Pass on the alarm to your neighbour or relative
INSTALLATION POSITION
The hub has a N45 magnet mounted inside, which snaps the hub onto a metal bracket. The metal bracket can be mounted on the wall by double sided tape or a screw and plug.
PRODUCT DIMENSIONS
H: 60 mm x W: 60 mm x D: 12 mm
PRODUCT WEIGHT:
Base hub weight with RJ45 Ethernet cable: 30 g.
OPERATIONS AC/DC:
110 / 240V AC to USB 5V DC (supplied)
INTERLINK FREQUENCY:
868 MHz
SIGNALS:
Transmits RF signals to the CAVIUS Wireless Family on open and close status.
VISIBLE INDICATOR:
CAVIUS logo lights up green when the power is on. It will start flashing when
the hub is powered up. If something is wrong with internet or power
connection, it will continue to flash.
DETECTION TIMING:
Duration of transmission is ~3 times receive interval.
WARRANTY
10 year
OPERATING TEMPERATURE:
+4ºC to +38ºC
OPERATING HUMIDITY:
Up to 90% RH non-condensing
STORAGE TEMPERATURE:
-20ºC to +60ºC
STORAGE HUMIDITY:
Up to 93% RH non-condensing
CONTACT
www.cavius.com
MANUFACTURER
Carrier Fire & Security Danmark A/S
DIMENSION
©2023 Carrier. All Rights Reserved.
All trademarks and service marks referred herein are property of their
respective owners.