HAMMERTON STUDIO IDB0039-08 Gem LED 7 Inch Burnished Bronze Indoor Sconce Wall Light User Guide
- June 13, 2024
- HAMMERTON STUDIO
Table of Contents
HAMMERTON STUDIO IDB0039-08 Gem LED 7 Inch Burnished Bronze Indoor Sconce
Wall Light
Product Information
- Collection: Gem
- Product #: IDB0039-08
- Blown Glass Gem Sconce Body
- Mounting Packet: N
- Weight(lbs.): 5
- Electrical Type: LED
- CCT: 2700K/3000K
- UL Location: DRY
- Elec. Qty: 1
- Wattage: 5.2
- Voltage: 120
- Finish: SEE WEB SITE FOR OPTIONS
- Source Lumens: Up: 340 Down: N/A
- Top Diffuser: CLOSED GLASS
- Dimmable: Forward/Reverse Phase or 0-10V To 1%
- Bottom Diffuser: CLOSED METAL
- CRI: 93+
- Power Factor: >0.9
Product Usage Instructions
To install the Gem Blown Glass Sconce, please follow these steps:
- Ensure you have a junction box with a minimum size of 4 L x 4 W x 1.5 D.
- Mount the Gem Blown Glass Sconce directly to the junction box.
- Install the driver in the junction box. Note that the driver is required for proper operation.
- Refer to the hammertonstudio.com website for available product options and specifications.
- The Gem Blown Glass Sconce is suitable for dry locations only, as indicated by the UL Location rating.
- Connect the electrical wiring. The Gem Blown Glass Sconce requires a single electrical connection.
- Ensure the wattage and voltage requirements are met (Wattage: 5.2, Voltage: 120).
- Choose the desired finish for your Gem Blown Glass Sconce from the options available on the website.
- The top diffuser of the sconce is made of closed glass, while the bottom diffuser is made of closed metal.
- The Gem Blown Glass Sconce has a high Color Rendering Index (CRI) of 93+ and a power factor greater than 0.9.
- The sconce is dimmable using Forward/Reverse Phase or 0-10V dimming to 1%.
For any further assistance or inquiries, please contact Hammerton Inc. at: 217 Wright Brothers Dr. Salt Lake City, UT 84116 (801)973-8095
- Collection:
- Gem
- Product #:
- IDB0039-08
OVERVIEW
DIMENSION
GEM BLOWN GLASS QTY:1
NOTE
DRIVER TO BE INSTALLED IN JUNCTION BOX. MINIMUM SIZE J-BOX REQUIRED IS 4″ L X
4″ W X 1.5″ D
Mounting Detail
SPECIFICATION
All dimensions are shown in inches unless otherwise stated
Visit hammertonstudio.com for product options
and specifications
© Copyright 2022. All rights in design, detail or invention of this drawing
are reserved as the property of Hammerton. Any imitation or adaptation without
written consent is strictly prohibited.
Hammerton Inc. 217 Wright Brothers Dr. Salt Lake City, UT 84116 (801)973-8095
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>