zingbird T62 Wireless Earbuds Mini Ear Buds User Manual

zingbird T62 Wireless Earbuds Mini Ear Buds

Customer Service

Web: www.zingbird.net
(If you have any issues, please feel free to contact us, and we will reply within 24hrs.)

Packing List

Note: Please remove protective films of the charging pins before using it.

Overview

Product Parameters

Model No. :T62
Charging Port : Type-C Input: SV = 1A
Support Profile: A2DP/AVRCP Earbuds: 30mAh 3.7V, 0.11Wh
Charging Case : 300mAh 3.7V, 1.11Wh Charging Time: 1 h-1.Sh for earbuds 1 h-1.Sh for charging case Transmission Range: 33 feels (without obstacle)

How to Pair with Your Devices?

Stereo Mode
(Prior to first use – please ensure that both the earbuds and the charging case are fully charged.)

1. Take out both earbuds from the case. (Both earbuds will automatically power on and enter pairing mode within 1 Os.)
2. Turn on Bluetooth on your device(Phone/PC), select “T62” to connect the earbud successfully.

Single Earbud Mode

1. Take out one earbud from the charging case.
2.  Turn on Bluetooth on your device, select “T62” to connect the earbud successfully.

Reset
If only one earbud is working or the earbuds fail to pair or connect, reset them as follows:

1. Turn off Bluetooth on all devices near the earbuds and remove/forget [T62] records from your device.
2. Take the earbuds out of the charging case.
3. Tap both earbuds quickly 5 times to clear the pairing record with the last device. (Both earbuds’ LEDs will flash green and white lights 3 times).

How to Wear Your Earbuds?

Step 1 : Make sure the ear tips are facing down. Then place the earbuds in your ears.
Step 2: Rotate the earbuds back to the auricle side to fit snugly. Ear tip facing up is the wrong way to wear earbuds.

How to Fit Your Ears?

Step 1: Select the appropriate ear tip size (small, medium, large) and place it on the earbuds.
Step 2: Place the ear tips firmly on the earbuds. There should be no gap between the ear tip and earbuds.
(Medium-sized ear tips are remounted on earbuds.)

Power On and Power Off

Power On
Auto Power On: Open the charging case, take out the earbuds, earbuds will automatically power on.
Manual Power On: Long tap on the touch control area for 2s, earbuds will power on and earbud light will flash white 1s.

Power Off
Auto Power Off : Put both earbuds in the charging case, and closing the case earbuds will automatically power off.

No- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. te: This method just for earbuds doesn’t pair with your device yet.
Manual Power Off : Long tap on either earbud for Ss, the light on earbuds will flash green, then earbud power off.

Note: The earbuds can not be turned off when connected, you need to put it back into the case

How to Charge?

Earbuds Charging:
Place both earbuds in the charging case and close the lid of the case. (Earbuds are charging, the LED indicator will flash green; Earbuds are fully charged, the green light will go off.)

Charging Case Charging
Please use the included Type-C USB cable to charge the charging case. (When charging, the digital display will flash and show the real-time battery level.)

Touch Control

Use Two Earbuds
Music:

• Play/Pause : Single tap
• Next Track : Double tap R earbud
• Last Track: Double tap L earbud
• Volume + : Long tap R earbud
• Volume- : Long tap L earbud

Call

• Answer Call : Double tap
• End Call : Double tap
• Reject Cal l: Long press 2s

Voice Assistant
Activate Siri or other voice Assistants: Triple tap left or right earbuds.

Use One Earbud

How to sync volume on Android?

1. Find “Settings” on the phone
2. Enable “Bluetooth”
3. Connect with “T62”
4. Click on the “Set button”
5. Enable the option “Sync volume with phone”

FCC Caution

Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>