FIRECOM UHW50X Wireless Headset User Guide

FIRECOM UHW50X Wireless Headset

FHW50X WIRELESS HEADSET

The FHW50X Wireless Headset is a high-quality headset designed for communication purposes. It offers various features and controls to enhance the user experience.

BASIC FEATURES – CONTROLS

• Volume down / Listen through volume down
• Power Right Push to Talk
• Volume up / Listen through volume up
• Press both arrows to switch between volume and listen through
• Status LED
• Volume down Left Push to Talk
• Volume Up
• Battery door
• Listen through mute ON (long press)
• Listen through mute OFF (long press)
• Charge port
• Adjustable headband
• External radio port
• Microphone

STATUS LED FUNCTIONALITY

The status LED provides important information about the headset’s battery level, connection status, and charge status.

BASIC FEATURES — CONTROLS

BASIC FEATURES — CONTROLS

STATUS LED FUNCTIONALITY

Battery level and connection status are both shown with the status LED.

Connection Status

When powered on, the color of the LED flashes indicates connection status.

On
Bluetooth connected
DECT pairing
DECT connected

Battery Level

Number of pulses indicates battery charge level.

LED color will vary depending on connection type.

Charge Status

When plugged in, the color of the LED indicates charge state. Slow flashing indicates a charge fault

• Charging
• Fully charged
• Charge fau

NEW BLUETOOTH PAIRING (If Bluetooth equipped)

1. Turn off headset.

2. Turn on headset.

3. Headset enters
   Bluetooth pairing mode.

4. : On phone, search for “Sonetics-HS-XX”.

Password is “0000”.

BLUETOOTH USE

Answer Call Press left PTT button.
End Call Press left PTT button

MIC POSITIONING

Position mic no more than 1/8″ from lips.

DECT PAIRING

For first use

1. Place Base Station into pairing mode (see base station manual for details).
   

2. Starting with the headset off, push and hold Push To Talk, then add the Power button and hold both until status LED flashes red and green.
   

3. The status LED flashes green when connection is successful. If it does not, repeat the pairing process.

HEADSET CHARGING

Use only supplied adapter.

Vehicle wiring.

Scan code to access complete manual or visit firecom.com/support

www.firecom.com
800-527-0555
17600 SW 65TH Ave
Lake Oswego, OR 97035 USA
© 2023 Firecom Corporation. All Rights Reserved.
The information in this document is subject to change without notice. No part of this document may be copied or reproduced in any form without the prior written consent of Firecom Corporation.
600-0384-00 Rev G

References

• Customer Service and Technical Support - Firecom
• Firefighter Headsets and Communication Systems - Firecom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>