BLUE OX BX1143 Jeep Cherokee Steel Bumper w/ Tow Hooks Instruction Manual

BLUE OX BX1143 Jeep Cherokee Steel Bumper w/ Tow Hooks

Product Information:

• Product Name: BX1143 2019-2022 Jeep Cherokee Steel Bumper w/ Tow Hooks (Includes ACC & Technology Package) (2-Speed Transfer Case)
• Attachment Tab Height: 20 inches – Attachment Tab Width: 37.25 inches – Tools Required: 1/4 Drill Bit, 8MM Socket, 10MM Socket, 15MM Socket, 16MM Socket, 30MM Socket, 3/4 Socket, 3/4 Wrench, T27 Torx
• Serial Number: N/A Bolt Torque Specifications:
• Torque in Foot-Pounds for Inch Bolts: – 1/4 Bolt Size: – Grade 5: 10 foot-pounds
• Grade 8: 14 foot-pounds – 5/16 Bolt Size: – Grade 5: 19 foot-pounds – Grade 8: 29 foot-pounds – 3/8 Bolt Size: – Grade 5: 33 foot-pounds – Grade 8: 47 foot-pounds – 7/16 Bolt Size: – Grade 5: 54 foot-pounds – Grade 8: 78 foot-pounds – 1/2 Bolt Size: – Grade 5: 78 foot-pounds – Grade 8: 119 foot-pounds – 5/8 Bolt Size: – Grade 5: 154 foot-pounds – Grade 8: 230 foot-pounds – 3/4 Bolt Size: – Grade 5: 257 foot-pounds – Grade 8: 380 foot-pounds – Torque in Foot-Pounds for Metric Bolts: – 6MM Bolt Size: – Grade 8.8: 6 foot-pounds – Grade 10.9: 8 foot-pounds – 8MM Bolt Size: – Grade 8.8: 16 foot-pounds – Grade 10.9: 22 foot-pounds – 10MM Bolt Size: – Grade 8.8: 31 foot-pounds – Grade 10.9: 40 foot-pounds – 12MM Bolt Size: – Grade 8.8: 54 foot-pounds – Grade 10.9: 70 foot-pounds – 14MM Bolt Size: – Grade 8.8: 89 foot-pounds – Grade 10.9: 117 foot-pounds – 16MM Bolt Size: – Grade 8.8: 161 foot-pounds – Grade 10.9: 230 foot-pounds – 18MM Bolt Size: – Grade 8.8: 222 foot-pounds – Grade 10.9: 318 foot-pounds

Product Usage Instructions:

1. Before installing or operating the equipment, read both the Installation Instructions and the General Information sheet.
2. If the front of your vehicle looks different from the product, contact the manufacturer at (402)385-3051.
3. Refer to your vehicle owner’s manual for the manufacturer’s towing specifications.
4. Ensure that you have the following tools: – 1/4 Drill Bit – 8MM Socket – 10MM Socket – 15MM Socket – 16MM Socket – 30MM Socket – 3/4 Socket – 3/4 Wrench – T27 Torx
5. Follow the step-by-step installation instructions provided in the manual for attaching the product: – Step 1: Install the existing 10MM Bolts (Qty. 8). – Step 2: Attach the BX1143 Baseplate, DS (Qty. 1) using the provided hardware and torque specifications. – Step 3: Attach the BX1143 Baseplate, PS (Qty. 1) using the provided hardware and torque specifications. – Step 4: Install the Electrical Mounting Bracket (Qty. 1). – Step 5: Attach the Attachment Tab Assembly with Hole (Qty. 2) using the provided hardware and torque specifications. – Step 6: Install the 1/4 Thick Washer Plate, 1/2 Hole (Qty. 2). – Step 7: Attach the 1/4-20 x 3/4 Hex Head Bolt, Grade 5, ZP (Qty. 3). – Step 8: Attach the #10-32 1/2 Round Slotted Head Screw (Qty. 2). – Step 9: Attach the 1/4-20 x 1/2 Hex Washer Head Type F TC S, ZP (Qty. 2). – Step 10: Attach the 1/2-13 x 5 Hex Head Bolt, Grade 5, ZP (Qty. 2). – Step 11: Attach the #12-14 x 1 Self Drilling Screw, ZP (Qty. 2).
6. Follow all safety warnings and precautions mentioned in the manual to prevent property damage, loss of towed vehicle, personal injury, or death.
   Note: For the latest version of installation instructions, visit www.blueox.com.

Please visit www.blueox.com for the latest version of these installation instructions.

BX1143
2019-22 Jeep Cherokee Steel Bumper w/ Tow Hooks
(Includes ACC & Technology Pkg.) (2-Speed Transfer Case)
Installation Instructions

BX1143
2019-22 Jeep Cherokee Steel Bumper w/ Tow Hooks
(Includes ACC & Technology Pkg.) (2-Speed Transfer Case)
Installation Instructions
Serial Number

Please read BOTH these Installation Instructions and the General Information sheet prior to installing or operating this equipment.

INSTRUCTION

1. Blue Ox® towing products and accessories are intended to be installed by Blue Ox® Dealers who are familiar with our products and have the equipment and knowledge necessary to do “fit work”. If needed, Blue Ox® Dealers can be found at www.blueox.com or by contacting our Technical Service Department at 402-385-3051.
2. Many Blue Ox® baseplates are designed to use existing holes and hardware to mount the baseplate to the towed vehicle. Even though bolts are there, do not assume they are adequate for baseplate mounting. Always use the hardware supplied in the hardware kit and existing hardware as specified in the installation instructions.

If the front of your vehicle looks different than this, please contact us at (402)385-3051.

Reference your vehicle owner’s manual for manufacturer’s towing specifications.

WARNING

Failure to read and follow these instructions could result in separation of the towed vehicle from the tow bar, causing property damage, loss of towed vehicle, personal injury or death.

BX1143
2019-2022 Jeep Cherokee Steel Bumper w/ Tow Hooks
(Includes ACC & Technology Package) (2-Speed Transfer Case)
Installation Instructions

Bolt Torque Specifications
Torque in Foot-Pounds for Inch Bolts

Bolt Torque Specifications
Torque in Foot-Pounds for Metric Bolts

Instruction Notes: The fascia cover and fascia removed and reinstalled for the baseplate installation.
Some drilling is required.

Place all components that are removed on a flat, sturdy surface. All items will be reinstalled unless otherwise noted after the baseplate is installed.
The dimensional variations between otherwise identical vehicles can be considerable. While the baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to compensate for vehicle manufacturer’s tolerances.
The BX8848 Tail Light Wiring Kit is recommended for this vehicle.

NOTICE

• Handling of some cosmetic parts when installing this product may require the use of protective covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• When using a reciprocating saw be aware of objects behind the cutting surface.
• Use a good quality paint to spray cut edges of frame to prevent rusting.
• Be sure that ALL electrical connections are plugged in and accessories are functioning properly before reinstalling the fascia.
• The baseplate is computer tested to your vehicle’s GVWR, exceeding this weight will void the manufacturer’s warranty.
• Be sure to use a sufficient amount of Loctite® Red on all bolt threads before tightening. Tighten all bolts according to the torque chart provided unless specified.
• Dealer or installer be certain the user receives these instruction sheets.
• If the baseplate is in an accident, it must be replaced. DO NOT use it again! An accident can cause unseen damage and using it again could result in more damage or serious injury. DO NOT use the baseplate if it is damaged or missing parts.

Tools Required

• Flat Screwdriver
• Torque Wrench
• Loctite® RED
• 1/4” Drill Bit
• 8MM Socket
• 10MM Socket
• 15MM Socket
• 16MM Socket
• 30MM Socket
• 3/4” Socket
• 3/4” Wrench
• T27 Torx

Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized vehicle will void the warranty.

Installation Instructions

1. Remove the thirteen (13) push pins from the top edge of the fascia cover. There are six (6) on each side and one (1) in the center. Remove fascia cover and set aside to be reinstalled later.

2. Using a T27 Torx, remover the one (1) screw from behind the fascia cover. Do this on both sides of the vehicle.

3. Using an 8MM socket, remove the three (3) bolts from the edge of the wheel well. Pull back the wheel well cover, using a 10MM socket, remove the bolt behind the trim (inset). Do this on both sides of the vehicle.

4. Using a 1/8” drill bit, drill out the one (1) rivet (gray) from the underside corner of the fascia.
   Using a 10MM socket, remove the two (2) bolts (white) from the underside of the fascia. Do this on both sides of the vehicle.

5. Lift the corner of the fascia up towards the fender and out to release. Continue along under the headlights unsnapping the fascia from the vehicle. As the fascia is removed unhook the plug on the driver side by pulling out the yellow piece and up on the red part to unhook. Remove fascia and set aside to be reinstalled later.

6. Using a 16MM socket, remove the two (2) bolts (white) from the underside of the tow hook. Using a 30MM socket, remove the nut (gray) from the backside of the tow hook (inset). Do this on both sides of the vehicle. Remove tow hooks and set aside, they will not be reinstalled.

7. Using a 15MM socket, remove the three (3) bolts from the frame extension. Using a 10MM socket, remove the nut (gray) from the frame extension. Do this on both sides of the vehicle. Remove frame extension, it will not be reinstalled. Note: Some models my have a clip that needs to be removed instead of a nut (inset).

8. Slide the baseplate into place and install the four (4) existing 10MM bolts. Tighten the bumper bolt first, then tighten the remaining three (3) bolts. Do this on both sides of the vehicle.

9. From the backside install the 1/2” x 5” bolt with lock washer and 1/4” x 2” DIA washer. Do this on both sides of the vehicle.

10. Hold electrical/breakaway mounting bracket in place and mark bumper. Using a 1/4” drill bit, drill two (2) holes for the bracket. Attach bracket to the bumper using the two (2) 1/4” bolts and hardware.

11. Attach the permanent baseplate safety cables to the provided convenience link on the baseplate. The photo above shows the recommended installation of the cables to frame of vehicle. Additional options may interfere with suggested mounting; in this case, secure the cables to a solid piece of the frame as described in the General Information sheet. Be sure the safety cables do not rub against any hoses or moving parts. Do this on BOTH sides of the vehicle.

12. Reinstall the fascia, fascia cover and reconnect all electrical.
    Note: Install new plastic rivets into the underside of the fascia, where the factory rivets were removed.

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime with our products. Our team is here to assist you with any questions you may have regarding the performance of your product. Simply call 402-385-3051 and you can speak with our technical service team.
Additionally, please visit our website to see which rallies our Destination America team will be attending. For a nominal fee, our service technician will service your towing system to ensure it’s in proper working condition. Also, as a commitment to our customers, should you visit our factory, you can stay at our full-service Blue Ox® campground at no charge along with enjoying a factory tour.
Again, thank you for being our customer and for the confidence you have shown in the performance of our products. It is because of customers like you we enjoy the success we have today.

General Information

1. Ensure that your product(s) are registered online at www.blueox.com. It is crucial to register your product(s) so that you may be alerted of product offerings, updates, upgrades, maintenance and safety bulletins, and/ or recalls.
2. It is the owner’s responsibility to inspect all towing equipment for cracked welds, missing or worn parts and loose bolts before each towing trip. Be sure to use Loctite® Red on all bolts and tighten to the recommended specifications.
3. It is the owner’s responsibility to hook up all towing equipment per manufacturer’s instructions/ recommendations.
4. Remove the attachment tabs when not in use (if applicable).

Notice To Baseplate Installer

1. It is YOUR responsibility to watch for:
   • Oil cooler and air conditioner lines
   • Electrical wires and hoses
   • Missing parts or attaching points on the frame
   • If the baseplate is improperly installed and is against a wire or hose, it could cause fluid leaks or electrical shorts some time after the actual baseplate installation.

Permanent Baseplate Safety Cable Installation

Permanent baseplate safety cables are strongly recommended when towing a vehicle with a tow bar.
The principle function of the permanent baseplate safety cables is to prevent the towed vehicle from breaking loose in the event the connection between the frame of the towed vehicle and the baseplate fails or becomes disconnected. The cables must be connected from the baseplate to the frame rail or cross member of the vehicle’s frame. The illustrations below show the possible arrangements recommended by Blue Ox®. Each permanent baseplate safety cable must have an adequate weight rating for the towing system. The weight rating of the two (2) cables together will not qualify.
Do not mount the permanent baseplate safety cables against wires, hoses or brake lines. These permanent baseplate safety cables should remain installed as long as the baseplate is installed on the vehicle. Permanent baseplate safety cables are to be used in conjunction with, and NOT a replacement for legally required safety cables attaching the towed vehicle to the towing vehicle.

Option #1
(Baseplates with Convenience Link Tabs)

Option #2
(Baseplates without Convenience Link Tabs)

BLUE OX ORIGINAL PURCHASERS

THREE-YEAR LIMITED WARRANTY

Automatic Equipment Manufacturing Company (“Automatic”) warrants to the original (first) retail purchaser that this product, manufactured by Automatic, shall be free from defect in material and workmanship under normal use and service for a period of three years from the date of delivery.
During said three-year period, Automatic will repair or replace any parts that have been returned by the original purchaser, to the factory, transportation prepaid, and in Automatic’s sole and absolute opinion found to be defective.

Limitations on Warranty Coverage:
Coverage under this warranty will be valid only if the customer warranty card is returned by the original purchaser within 30 days of purchase.
Coverage under this warranty will be effective only when a copy of the original invoice, showing date and place of purchase, accompanies any claim for warranty. This warranty is NON TRANSFERABLE.
This limited warranty will not cover, in any way or form, any alleged damages caused by incorrect or improper installation, improper use, modification or neglect of product, failure to properly service and maintain, misuse, act of God, accident or failure of the user to follow guidelines contained in the instructional material provided by Automatic.

This warranty does not cover normal wear and tear, paint or rust.
Warrantor assumes no responsibility to the owner for loss of use of product, loss of time, inconvenience or any other damage consequential or otherwise. Including, but not limited to mileage, expense of transporting of product, return shipping expense, mechanics travel time, telephone, road service, towing, and rental during repairs, travel, lodging, loss or damage to personal property or loss of earnings.
REPAIR OR REPLACEMENT AS SET FORTH IN THIS LIMITED WARRANTY IS THE SOLE EXCLUSIVE REMEDY OF THE PURCHASER. AUTOMATIC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN LENGTH TO THE DURATION OF THIS WARRANTY.

Please visit http://blueox.com/warranty/ to register your warranty

References

• Blue Ox Product Warranty Registration - Blue Ox
• Home - Blue Ox

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>