Thermador PRI30LBHU Pro Harmony Induction Knob Kit Instructions
- June 13, 2024
- Thermador
Table of Contents
Thermador PRI30LBHU Pro Harmony Induction Knob Kit
PRODUCT INFORMATION
Pro Harmony Induction Knob Kit
The Pro Harmony Induction Knob Kit is designed to replace the knobs on your
appliance. It is important to follow the instructions provided to ensure
proper installation and safe operation.
Knob Replacement
CAUTION: DO NOT force knobs onto control shafts. Failure to install and operate knobs properly may result in personal injury and damage to the appliance.
- To exchange knobs, make sure that the OFF marking on the knob is facing up.
- Gently push the knob on or pull the knob off the control’s shaft.
- Each knob should install easily. If a replacement knob is not fitting properly, it is likely that an incorrect position has been chosen.
- After installation, verify that each knob turns freely and that the markings on each knob correspond to the graphics or indicators on the control panel.
Knob Identification
The following illustrations identify each knob type contained within this
kit. Locate the position of each knob type by its corresponding number on the
diagram that matches the control panel on your appliance. Some knobs will be
used in more than one location, and other knobs may not be used at all,
depending on your range model.
Mode knob — x1
This knob is used for selecting different cooking modes on your appliance.
Temperature knob — x1
This knob is used for adjusting the temperature settings of your appliance.
Proposition 65 Warning
This product may contain a chemical known to the State of California, which
can cause cancer or reproductive harm. Therefore, the packaging of your
product may bear the following label as required by California:
State of California Proposition 65 Warning:
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Contact Information
If you have any further questions or concerns, please contact us: 1901 MAIN
STREET, SUITE 600, IRVINE, CA 92614
- Phone: 800-735-4328
- Website: www.thermador.com
- Customer Support: 8001261111
Knob replacement
CAUTION
DO NOT force knobs onto control shafts. Failure to install and operate
knobs properly may result in personal injury and damage to the appliance.
To exchange knobs, make sure that the OFF marking on the knob is facing up, while gently pushing the knob on or pulling the knob off the control’s shaft. Each knob should install easily. If a replacement knob is not fitting properly, it is likely that an incorrect position has been chosen. After installation, verify that each knob turns freely, and that the markings on each knob correspond to the graphics or indicators on the control panel.
Knob identification
The following illustrations identify each knob type contained within this kit. Locate the position of each knob type by its corresponding number on the diagram that matches the control panel on your appliance. Some knobs will be used in more than one location and other knobs may not be used at all; this depends upon your range model.
Proposition 65 Warning
This product may contain a chemical known to the State of California, which
can cause cancer or reproductive harm. Therefore, the packaging of your
product may bear the following label as required by California:
State of California Proposition 65 Warning:
WARNING
Cancer and Reproductive Harm
**Knob Bouton
**
Knob Locations
- PRI30LBHU
- PRI36LBHU
1901 MAIN STREET, SUITE 600, IRVINE, CA 92614 800-735-4328 WWW.THERMADOR.COM © 2022 BSH Home Appliances Corporation
8001261111
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>