SAMSUNG OH24B 24 LED-Backlit LCD Display User Guide

SAMSUNG OH24B 24 LED-Backlit LCD Display

Product Information

The OH24B is a display product manufactured by Samsung. Please note that the color and appearance of the product may vary and the content in the manual is subject to change without prior notice to improve performance. For further details, you can download the user manual from the official Samsung website: http://www.samsung.com/displaysolutions The terms HDMI and HDMI High- Definition Multimedia Interface, as well as the HDMI Logo, are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Product Usage Instructions

Checking the Components
Contact the vendor from whom you purchased the product if any components are missing. Please note that components may differ depending on the location.

Components

1. Wired LAN connection port: Used to connect an external device such as a laptop to the internet. Connects to MDC and the internet using a LAN cable (10/100 Mbps).
2. RS232C cable connection: Connects to MDC using an RS232C cable.
3. Audio output: Outputs sound to an audio device via an audio cable.
4. HDMI connection: Connects to a source device using an HDMI cable or HDMI-DVI cable.
5. USB memory device connection: Connects to a USB memory device.
6. WiFi&BT module and USB 2.0: Dedicated for the WiFi&BT module and USB 2.0 (USB memory device) only. Please note that it is not compatible with USB 3.0.

Connecting and Using a Source Device
Use Cat7 (*STP Type) cable for the connection (10/100 Mbps). Make sure to use a shielded twist pair.

Troubleshooting Guide
If you encounter any issues, refer to the following solutions:

• The screen keeps switching on and off: Check the cable connection between the product and PC, and ensure the connection is secure. Also, check that the product is connected correctly.
• No Signal is displayed on the screen: Check that the device connected to the product is powered on.
• Not Optimum Mode is displayed: This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency. Refer to the Supported Preset Timing Modes Table and set the maximum resolution and frequency according to the product specifications.
• The images on the screen look distorted: Check the cable connection to the product.
• The screen is not clear or blurry: Set the resolution and frequency to the recommended level.
• The screen appears unstable and shaky: Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table.
• The remote control does not work: Check if the batteries are flat. Also, check for power failure and ensure that the power cord is connected. Additionally, check for any special lighting or neon signs switched on in the vicinity.

Specifications

Model Name: OH24B

Panel Size Display Area: [Display area
information not provided in the user manual]

• The color and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
• Download the user manual from the following Samsung Website for further details.  http://www.samsung.com/displaysolutions

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Checking the Components

Contact the vendor where you purchased the product if any components are missing. Components may differ in different locations.

Components

• QUICK SETUP GUIDE
• Regulatory guide
• Batteries (AAA x 2) (Not available in some locations)
• EXTERNAL WiFi&BT module accessory
• Warranty card (Not available in some locations)
• Power cord
• Remote Control

Reverse Side

1. Wired LAN connection port used to connect an external device such as a laptop to connect to the Internet.
   • Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)
2. Connects to MDC using an RS232C cable.
3. Outputs sound to an audio device via an audio cable.
4. Connects to a source device using a HDMI cable or HDMI-DVI cable.
5. Connect to a USB memory device.
6. Connect to a USB memory device.
   • Dedicated for the WiFi&BT module and USB 2.0 (USB memory device) only.
   • It is not compatible with USB 3.0.

Connecting and Using a Source Device

Connecting to a P

Connecting to a Video Device

Connecting to an Audio System

Connecting the LAN Cable

Use Cat7(STP Type) cable for the connection. (10/100 Mbps)
Shielded Twist Pair

Connecting to MDC

For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website.
http://www.samsung.com/displaysolutions

Troubleshooting Guide

product and PC, and ensure the connection is secure.
No Signal is displayed on the screen.| Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.| This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency. Preset Timing Modes Table and set the maximum resolution and frequency according to the product specifications.
The images on the screen look distorted.|

Check the cable connection to the product.

The screen is not clear.
The screen is blurry.| Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.| Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table.
There are shadows or ghost images left on the screen.

The remote control does not work.

| Make sure that the batteries are correctly in place

(+/- ).

Check if the batteries are flat.

Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.

Specification

Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental considerations| Operating| Temperature : -22 ℉ – 122 ℉ (-30 ℃ – 50 ℃)
Humidity : 10% – 80%, non-condensing
Storage| Temperature : -4 ℉ – 122 ℉ (-20 ℃ – 50 ℃)
Humidity : 5% – 95%, non-condensing

• This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
• For detailed device specifications, visit the Samsung website.

Installing the product

Contact SAMSUNG WORLD WIDE
Web site: http://www.samsung.com

BRAZIL

| 0800 555 0000 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros)
CHILE| 800 726 786

COLOMBIA

| Bogotá en el 600 12 72

Sin costo en todo el pais 01 8000 112 112 Y desde tu celular #726

COSTA RICA| 00-800-1-SAMSUNG (726-7864)
DOMINICAN REPUBLIC| 1-800-751-2676
ECUADOR| 1-800-SAMSUN (72-6786)
EL SALVADOR| 8000-SAMSUNG (726-7864)
GUATEMALA| 1-800-299-0033
HONDURAS| 800-2791-9111
JAMAICA| 1-800-SAMSUNG (726-7864)
MEXICO| 800-SAMSUNG
NICARAGUA| 001-800-5077267
PANAMA| 800-0101
PARAGUAY| 0800-11-SAMS (7267)
PERU| 080077708 Desde teléfonos fijos, públicos o celulares
PUERTO RICO| 1-800-682-3180
TRINIDAD & TOBAGO| 1-800-SAMSUNG (726-7864)
URUGUAY| 0800-SAMS (7267)
VENEZUELA| 0-800-100-5303

IMPORTADO POR : SAMSUNG ELECTRONICS MÉXICO S.A. DE C.V.
General Mariano Escobedo 476, Piso 8 Col.
Anzures, Alcaldía Miguel Hidalgo, Ciudad de México CP. 11590
TEL : (55) 5747-5100 / 800 726 7864

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>