Gevi 5403L Espresso Machine User Manual

Table of Contents

Gevi-5403L-Espresso-Machine-PRODUCT-IMAGE

Specifications

Espresso Function Indicator

The espresso machine is equipped with an NTC temperature control system that accurately controls temperatures for coffee brewing, milk steaming, and hot water discharge. The three indicators on the panel indicate different working conditions of the machine. Refer to the table below for detailed information.

Indicator	Conditions	Working Conditions
Low-speed	Off	Preheating for coffee brewing or hot water discharge
Medium-speed	Flashing	Ready for coffee brewing
High-speed	Solid	Coffee is being brewed

What to Do

Low-speed: Wait for the preheating to be finished.
Medium-speed : Press the BREWING ESPRESSO button to start coffee brewing or turn the knob to the water icon to discharge hot water.
High-speed : Press the BREWING ESPRESSO button to stop brewing when the desired amount is reached (40mL/cup is recommended).

Solutions to High-temp Alarm

The fastest way to lower the temperature is to restore the MILK STEAMING button to its initial state, then turn the knob to the water icon for about 10 seconds (place an empty cup under the steam wand tip).
Wait for about 30 minutes.

Solutions to Low-temp Alarm

Restore the BREWING ESPRESSO button to its initial state and wait for the espresso function indicator to turn solid. Then press the button again to start coffee brewing.
Turn the knob to the icon and wait for the preheating to be finished. Then turn the knob to the water icon to dispense hot water.

Steam Function Indicator
The steam function indicator shows the working conditions of the machine for milk steaming.

Indicator	Conditions	Working Conditions
Low-speed	Off	Preheating for milk steaming
Medium-speed	Flashing	Ready for milk steaming
High-speed	Solid	Steam is being released

What to Do

Low-speed: Wait for the preheating to be finished.
Medium-speed: Turn the knob to the steam icon to start steaming milk
High-speed: Turn the knob to the icon to stop releasing steam when milk steaming is completed.

Hot Water Indicator
The hot water indicator shows the working conditions of the machine for hot water discharge.

Indicator	Conditions	Working Conditions
No. 1	Off	Hot water is being discharged

What to Do

Place an empty cup under the steam wand tip to contain hot water. When the desired amount of water is reached, turn the knob to the icon to stop the hot water discharge.

Espresso Function Indicator + Steam Function Indicator

Indicator	Conditions
No. 1	High-speed flashing

Working Conditions of the Machine

The BREWING ESPRESSO and MILK STEAMING buttons were pressed down simultaneously.

What to Do

Restore the BREWING ESPRESSO and MILK STEAMING buttons to their initial state and turn the knob to the water icon to dispense water for about 10 seconds (place a cup under the steam wand tip).

FAQ (Frequently Asked Questions)

Q: How do I start coffee brewing?
A: Press the BREWING ESPRESSO button or turn the knob to the water icon.
Q: How do I stop brewing when the desired amount is reached?
A: Press the BREWING ESPRESSO button.
Q: How do I lower the temperature in case of a high-temp alarm?
A: Restore the MILK STEAMING button to its initial state, then turn the knob to the water icon for about 10 seconds (place an empty cup under the steam wand tip) or wait for about 30 minutes.
Q: How do I address a low-temp alarm?
A: Restore the BREWING ESPRESSO button to its initial state and wait for the espresso function indicator to turn solid. Then press the button again to start coffee brewing or turn the knob to the icon, wait for the preheating to be finished, then turn the knob to the water icon to dispense hot water.
Q: How do I start milk steaming?
A: Turn the knob to the steam icon.
Q: How do I stop releasing steam during milk steaming?
A: Turn the knob to the icon.
Q: How do I stop hot water discharge?
A: Turn the knob to the icon.

This espresso machine is able to accurately control temperatures for coﬀee brewing, milk steaming, and discharge of hot water through its NTC temperature control system, and diﬀerent changes of the three indicators on the panel indicate a diﬀerent working condition of the machine. Refer to the table below for detailed information.
GECME403L-U