ECO-750 Slim Line Alarm Clock with FM Radio User Manual

ECO-750 Slim Line Alarm Clock with FM Radio

Product Information

• Product Name: ECO-750
• Model Number: HX06-00501000-AG
• Power Supply: AC/D
• Voltage: 100-240V
• Frequency: 50/60Hz
• DC Output: 5V
• Battery Type: CR2032
• Weight: 73.62g
• Dimensions: 35mm x 73mm x 62mm

Product Usage Instructions

1. Connect the device to a power source using the provided AC/DC adapter.
2. Set the FM frequency using the dial. The range is from 0.2 to 0.4 MHz.
3. Choose between 12-hour or 24-hour time format by pressing the “Set” button.
4. Set the alarm time by pressing the “Alarm 1-2” button. Use the arrow buttons to adjust the hour and minute. Press the “ON/OFF” button to activate or deactivate the alarm.
5. Adjust the volume using the “Volume” button. There are seven levels available, ranging from V01 to V07.
6. For snooze and dimming functions, use the corresponding buttons. The snooze time can be set to 5, 10, 30, 45, 60, 75, or 90 minutes.
7. The device can also function as an FM radio. Press the “FM” button to switch between different channels.
8. To turn off the device completely, unplug it from the power source.
9. For any inquiries or support, contact Barcom at 08-9355925 or info@barcom.co.il .

Trouble shooting

If your clock displays irrelevant time or does not function properly, which maybe caused by electro-static discharge or other interference, unplug the DC jack to disconnect the AC power (and remove the backup battery). The clock radio will be reset to default settings and you need to set it again.

Care of your product

1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries.

Specification

• Alarm duration 1 hour
• Snooze duration: 5 to 60 minutes
• Sleep timer selections: 5, 15, 30, 45, 60, 75, 90 minutes to OFF
• Volume: V01 (minimum) to V15 (maximum)
• Preset Memories of radio: 20

Default settings

• Time format : 12/24 hour
• Time: 0:00
• Alarm 1 and 2 : 6:00
• Volume: V07 (Level 7)
• Snooze duration: 05 (5 minutes) (above spec may revise with prior notice)

Setting time, 12/24HR time and the snooze duration

1. Press set once, the hour digits flash. Press up or down button to set the current hour (hold to advance rapidly).
2. Press set again, the minute digits flash. Press up or down button to set minutes. (hold to advance rapidly).
3. Press set again, the display shows“24H” and flashes. Press up or down button to select ”12H” or “24H” time format.
4. Press set again, the display shows “05” and flashes. Press up or down button to select your snooze time from 5 to 60 minutes.
5. Press set again or if no key is pressed in approx.10 seconds to exit the setting mode. Note: when 12-hour time format is selected, the PM/AM LED will appear at the display to indicate the time。

Setting the alarms

1. Press alarm 1-2 button once, the alarm1 clock icon and the hour digits flash. Press up or down button to set the alarm 1 hour. (hold to advance rapidly).
2. Press alarm 1-2 button again to adjust minutes. Press up or down button to set the alarm 1 minutes. (hold to advance rapidly).
3. Press alarm 1-2 button again, LED displays “OFF” (alarm off). To select wake to sound sources, press up or down button to select:

Using the sleep timer

• In radio mode, short press the radio button repeatedly to switch the sleep time between minute of 5/15/30/45/60/75/90/off. Choosing your desired sleep time, the unit will start to count- down the playing time, and the radio sound will off automatically when the sleeping time is being; press the radio button twice can check the remaining sleeping time.
• Indoor humidity and temperature: the unit can detect and show the indoor humidity in percentage, and temperature in Celsius degree information on the right side of display.
• Please note the information probably have some deviation depends on ambient condition. This is not malfunction.

Control Locations

1. down button
2. radio button
3. alarm 1-2/on-off button
4. snooze/dim button
5. set button
6. volume button
7. up button
8. FM antenna
9. DC 5V jack
10. backup cell battery compartment

Installation

Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the unit. Your clock radio is ready to work for you.

Back up battery installation
Your clock radio requires one CR2032 lithium battery (not included) to provide backup power to the clock in the event of a temporary power interruption.

1. Pull out the cell battery cover on side of unit by your fingers; install one fresh CR2032 lithium battery into the battery bracket according to engraved +/- polarity.
2. Push back the battery bracket into the compartment together the installed battery. If AC power interrupted, the LED display will go off and both the radio and the alarm will
   not function. The backup battery will keep the time and all settings of your unit. Make sure a fresh CR2032 lithium battery is used. A fresh CR2032 battery could backup your clock continuously for around 3 days.

ECO-750
Slim Line Alarm Clock with FM Radio, Temperature and Humidity Meter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>