imilab W01 Smart Watch User Manual

imilab W01 Smart Watch

Product Information

The Smart Watch W01 is a versatile wearable device that offers various features to enhance your everyday life. It is equipped with a heart rate monitor, blood oxygen monitor, sleep tracker, weather forecast, music control, message notifications, alarm clock, breathing exercises, and more. The watch also supports sport modes for tracking your daily steps, distance, and calories burned. With its sleek design and comfortable fit, the Smart Watch W01 is perfect for those who want to stay connected and monitor their health on the go.

Key Features:

• Heart rate monitor
• Blood oxygen monitor
• Sleep tracker
• Weather forecast
• Music control
• Message notifications
• Alarm clock
• Breathing exercises
• Stopwatch
• Timer
• Flashlight
• Find Phone
• Physiological Cycle tracking

Product Usage Instructions

How to wear

To wear the Smart Watch W01 correctly, follow these steps:

1. Place the device on your wrist, about one finger’s width from the carpal.
2. Adjust the strap to a comfortable position.
3. If using the heart rate monitor, wear the device slightly tighter.

How to download & connect to APP

To download and connect the Smart Watch W01 to the Gloryfit APP, follow these steps:

1. Long press the power button on the watch to power it on.
2. Scroll down on the watch face and click on “Settings”.
3. In the “Settings” menu, select “About” and then “Download QR code”.
4. Use your mobile phone to scan the QR code and download the Gloryfit APP.
5. Open the Gloryfit APP and select “Add Device” on the device page.
6. Follow the instructions on the screen to complete the pairing process.

Note: During the pairing process, make sure your phone’s Bluetooth is turned on and ensure that the watch is connected to your phone correctly. If you encounter any issues during use, you can try powering off and on again or perform a factory reset on the watch.

Operating Instructions

Here are some important operating instructions for the Smart Watch W01:

• To access the shortcut page, slide down from the main page.
• To view received messages, scroll up from the main page.
• To access the main menu, swipe right from the main page.
• To access the shortcut page, swipe left from the main page.
• To change watch faces, long press the watch face for 3 seconds on the main page and slide left or right to choose a new face.
• To power on/off the watch, press and hold the side button for 3 seconds on the dial interface.
• During normal operation, press the side button to go back to the previous page. On the main page, press the side button to turn the screen on/off.

Function Introduction

The Smart Watch W01 offers various functions to enhance your daily life:

• Sport Mode: Track your daily steps, distance, and calories burned. More details can be viewed from the APP.
• Heart Rate Monitor: Measure your heart rate, record and display 24-hour heart rate, and enable automatic heart rate monitoring every 10 minutes. More detailed data can be viewed from the APP.
• Blood Oxygen Monitor: Record your blood oxygen status. More details can be viewed in the APP. Note that the value is for reference only and cannot be used as a medical basis.
• Sleep Tracker: Record your sleep status. More details can be viewed in the APP.
• Weather Forecast: View the current weather status and the next 6 days’ forecast. Ensure that Bluetooth is correctly connected.
• Music Control: Connect to the APP to control music playback, including play/pause, previous/next track, and volume adjustment on your phone.
• Message Notifications: Receive instant notifications on the watch for the 8 latest messages. Note that this feature requires permission to be enabled on the APP side.
• Alarm: Set up to 8 alarm clocks on the watch.
• Breathing Exercises: Record breath training sessions.
• More: Additional features include a stopwatch, timer, flashlight, and find phone functionality.
• Setting: Access various settings such as dial customization, brightness adjustment, screen settings, and APP download.
• Physiological Cycle: Set personal information to female on the APP and turn on the physiological cycle function to display corresponding safety periods, menstrual periods, and ovulation period reminders on the watch.

Scan the QR code with your mobile phone to get the manual in more languages

Please refer to this manual before using the product.

Notes

1. The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software.
2. Please charge this product with the configured cable forno less than 2 hours before using it.
3. Before using the product, you need to connect the APP synchronization time and set your personal information.
4. This product supports 3ATM rank waterproof, not suitable for deep sea diving. Hot water, tea and other corrosive liquids are destructive to the watch, and will not be able to enjoy the product warranty and free maintenance services.

How to wear

Please wear the device on your wrist correctly, about one finger from the carpal and adjust it to comfortable position. Below picture as reference. Tip: Please wear the device a bit little tighter when heart rate monitor.

How to download & connect to APP

1. Long press power button to power on, scroll down on watch face, click“Settings —— About—— Download QR code”, use your mobile phone to scan QR code to download and install “Gloryfit”APP .

You can also Scan below “Glortyfit” QR code to download and install“Gloryfit” APP.

2. Open “Gloryfit” and select “Add Device” on the device page, then follow the instructions on the screen.

Note:

1. During pairing process, please make sure phone bluetooth is turned on, make sure watch is connected to phone correctly through bluetooth.
2. If the device can not be searched or are not able to connected during use, please long press power button for three seconds to power off, and then power on again, or go to settings on the watch to select “factory reset”, then add new device again from your phone.

Operating Instructions

• a. Shortcut page: Slide down from main page, go to shortcut page.

• b. SMS push: Scroll up from main page, you will see messages received.

• c. Main menu: Swipe right from main page.

• d. Shortcut page: Swipe left from main page.

• e. Quick access to change watch faces: Long press the watch face for 3 seconds on main page, slide left or right to choose watch faces.

• f. Power on/off: press and hold the side button for 3 seconds on the dial interface.

• g. Normal operation, press the side button to return back to previous page; On main page, press the side button to turn on/off the screen.

Function introduction

Other functions

Find watch, 12/24h time system, sedentary reminder, low battery reminder, incoming call reminder, online dial / custom dial, unit setting, turning the wrist to brighten the screen, drinking water reminder, heart rate warning reminder, physiological cycle reminder, goal achievement reminder.

Charging

Attach the charging cable to the watch charging port, ensure the metal pins fully connected. Please use the correct charging adapters which are 5V 0.5A .
Note: If smart watch can not be powered on after being left unused for long time, please clean up the charging metal pins to make sure connecting well.

Warranty

1. One year warranty for default hardware defectives, half of year for battery and charging cable.
2. Below reasons cause defectives are not included in free warranty service:
   • (a) Personal assemble or disassemble.
   • (b) Falling damage during use.
   • (c) All man-made damage or due to the third party’s fault, improper use (such as: water in the smart watch, external force shattering, scratch during use etc).
3. Please provide a warranty card with the details filled when request for after selling service.
4. Please contact with direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.

Notes

1. To ensure waterproof, please DO NOT:
   • (a) Wear the watch during hot shower or in hot tea and other corrosive liquids.
   • (b) Remove any screws or buttons.
2. Products with batteries cannot be disposed with household waste. Please send this product to WEEE collecting points near you.

Warranty Certificate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>