COOLER MASTER MM712 Pro Gaming Mouse User Manual
- May 15, 2024
- COOLER MASTER
Table of Contents
MM712 Pro Gaming Mouse
“`html
Specifications
- Dimensions: 135.0mm x 82.0mm x 246.0mm
- Model Number: MM-712-KKOH2
- Weight: 3987g
- Country of Origin: China
- Contact: +886-2-2225-3517
- Version: Ver 2.0 – 2023/08 512006251-GP
Product Information
The MM712 Pro is designed to elevate your gaming experience with
its lightweight design, advanced sensor, and seamless connectivity.
It features various buttons for different functions and LED
lighting for a customizable gaming setup.
Product Usage Instructions
Buttons Overview
-
Left Click: Primary mouse button for selection
-
Wheel Button: Scroll wheel functionality
-
Right Click: Secondary mouse button for context menus
-
DPI Cycle Button: Adjust sensitivity levels
-
Forward Button: Navigate forward in applications or web
browsers -
Backward Button: Navigate backward in applications or web
browsers -
LED Lighting Color Change: Customize LED colors
-
LED Mode Change: Switch between different LED lighting
modes
Package Contents
- Mouse
- Wireless Dongle
- USB Cable
- User Manual
Wireless Setup
-
Choose between Bluetooth, Wired, or 2.4 GHz connection
mode. -
Pair the mouse with your device.
-
Adjust LED lighting settings as desired.
-
For detailed setup instructions, refer to the user manual or
visit the support page on coolermaster.com.
- To ensure optimal use of the product, please download the
MasterPlus+ software and update the latest firmware from
https://masterplus.coolermaster.com/
FAQ
Q: How do I change the DPI settings on the MM712 Pro?
A: Use the DPI Cycle Button on the mouse to adjust sensitivity
levels.
Q: Can I customize the LED lighting on the mouse?
A: Yes, you can change the LED lighting colors and modes using
the dedicated buttons on the mouse.
Q: Where can I get technical support for the MM712 Pro?
A: For technical support, visit coolermaster.com/support or
contact customer service at +886-2-2225-3517.
“`
135.0
82.0
246.0
MM-712-KKOH2
FCC Warning Statement Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition without
restriction.
IC warning: This device contains licence-exempt tasmittre(s)/receiver(s)/ that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions: 1) this
device may not cause interference and 2) this device must accept any
interference, including interference that may cause undesired operation of the
device. Radiation Exposure: This equipment complies with Canada radiation
exposure limits set forth for an uncontrolled environment; To maintain
compliance with IC’s RF Exposure guidelines, This device and its antenna(s)
must not be co-located or operation in conjunction with any other antenna or
transmitter. Déclaration de l’ISED Canada : Cet appareil contient des
tasmittre (s) / récepteur (s) sans licence / conformes à l’innovationRSS
exemptes de licence de Sciences et Développement économique Canada.
L’opération est sous réserve des deux conditions suivantes : 1) cet appareil
ne peut pas causer d’interférences et 2) ce dispositif doit accepter toute
interférence, y compris peut provoquer le fonctionnement indésirable de
l’appareil. Exposition aux rayonnements : Cet équipement est conforme aux
radiations du Canada limites d’exposition pour un environnement incontrôlé
noncé d’exposition RF Pour maintenir le respect des guides d’exposition RF
d’IC, Cet appareil et ses antennes ne doivent pas être co-localisé ou en
opération en conjonction avec toute autre antenne ou émetteur.
FR Cet appareil, ssaonbacoredroienet se recyclent
À DÉPOSER À DÉPOSER EN MAGASIN EN DÉCHÈTERIE
OU
1 N Indian Hill Blvd Suite D200 Claremont, CA 91711 USA
2023
Room 112, Building 9, No. 327, Songjin Road, Jinshanwei Town, Jinshan Dist.,
Shanghai City, China
3987 +886-2-2225-3517
Ver 2.0: 2023/08 512006251-GP
MM712 Pro
ELEVATE YOUR GAMING WITH
MM-712-KKOH2
LIGHTWEIGHT DESIGN, ADVANCED
SENSOR & SEAMLESS CONNECTIVITY
BUTTONS OVERVIEW
Pair
EN
Left Click Wheel Button Right Click
ES
Clic Izquierdo Botón de rueda Clic Derecho
IT
Click Sinistro Tasto Rotella Click Destro
DPI Cycle Button Forward Button Backward Button
Ciclo de DPI Botón de avanzar Botón de retroceder
Ciclo DPI Tasto Avanti Tasto Indietro
LED Lighting Color Change LED Mode Change
Cambio de color de iluminación de LED Cambio de modo de LED
Cambio colore illuminazione a LED Cambio modalità LED
FR
Clic Gauche Molette Clic Droit
PT
Click Esquerdo Botão da Roda Click Direito
DE
Linker Klick Radtaste Rechter Klick
RU
JP
CHT
CHS
Cycle DPI Bouton Avant Bouton Arrière
Ciclo DPI Botão Frontal Botão Traseiro
DPI-Zyklus Forward Seitentaste Backward Seitentaste
DPI
DPI
DPI
DPI
Changement de couleur de l’éclairage LED Changement de mode LED
Mudança de cor da iluminação LED Mudança de Modo LED
Farbänderung der LED-Beleuchtung LED-Modus ändern
PACKAGE CONTENTS
· MM712 Pro Mouse · High-speed 2.4GHz Dongle · Extension Adapter · USB Type-C to Type-A Ultraweave Cable
· Mouse Grip Tape · Extra PTFE mouse Feet · Quick Start Guide
WIRELESS SETUP
Bluetooth / Wired / 2.4 GHz
1
2
Pair
LED LED
1
2
1
2
3
4
For more information, please visit coolermaster.com/support
- To ensure optimal use of the product, please download the MasterPlus+ software and update the latest firmware. https://masterplus.coolermaster.com/