FLOS T1 To Tie Table lamp User Manual
- June 13, 2024
- FLOS
Table of Contents
FLOS T1 To Tie Table lamp
Product Usage Instructions
- Install the To-Tie product according to the installation instructions provided by FLOS.
- The To-Tie product is designed to be used with T1-T2: 7W LED and T3: 10W LED bulbs.
- Use the push button to control the dimming function of the To-Tie product.
- Press and hold the button to set the brightness level to 100%.
- Release and hold the button to set the brightness level to 50% or turn off the product.
- The To-Tie product has a memory function that will remember the dimming setting when turned off and restore it when turned on again, if used with a controlled socket.
- Refer to Fig. 1 for a visual representation of the push button and dimming functions.
- Follow the instructions provided by FLOS for any additional features or settings of the To-Tie product.
Please refer to the official FLOS website at flos.com for more information and support regarding the To-Tie product.
Information
WARNING: The safety of this fitting can only be guaranteed if these instructions are observed, during both installation and use. Please retain these instructions safety.
REMARKS
- When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
- The appliance may in no way be modified or tampered with. Any modification may compromise safety and making the appliance itself dangerous.
- FLOS declines all responsibility for products that are modified.
- The device carries no risk of photobiological emissions.
- The light source cannot be replaced by the customer. Contact FLOS for information.
- Should the external trailing cable get damaged, it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
- The symbol shown on the device indicates that the product must be disposed of in a different manner than with the urban waste.
TECHNICAL DATA
- T1-T2: 7W LED.
- T3: 10W LED.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
INSTALLATION AND USE
Pic.1
- Pushing the button produces the following, in order:
- Turn-on at 100% light intensity;
- Decrease down to 50% of light intensity;
- Turn-off. Prolonged pressing of the button causes 100% turn-on, gradual decrease of the light intensity down to 10%, releasing and re-pressing the button, an increase up to 100%.
- Release the button when you reach the desired intensity.
- NOTE: if a controlled socket is used, the dimmer memorises the setting at the time of switching off, to which the appliance returns the next time it is switched on; this function is disabled if you only act on the dimmer.
- After a blackout with the appliance switched off, it will come on at 50% light intensity level when the power is restored.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>