CTA PAD-ARLTD2 Height Adjustable Rolling Desk With 2 Grommet VESA Mounts Instruction Manual
- June 13, 2024
- CTA
Table of Contents
Height-Adjustable Rolling Desk with 2 Grommet VESA Mounts
PAD-ARLTD2
INSTRUCTION – MANUAL
CONTENTS:
INSTALLATION:
-
Mounting Plate to Workstation Main Pole
1A. Screw main body pole (A) to the metal plate connector (D) with the M6x12 screws (H) using the included 4mm allen key (K) until securely tightened. -
Mounting Plate to Underside of Table
2A. Screw the now attached metal plate connector (D) to the workstation top (C) with the M6x12 screws (I) using the included 4mm allen key (K) until securely tightened.
-
Mounting Base with Main Body Pole
3A. Screw the base (B) to the main body (A) with the M6x60 screws (G) and the D6 washers (J) using the included 5mm allen key (L) until securely tightened. -
Attaching Wheels to Base
4A. Using the provided wrench (M), attatch the normal casters (F) to the narrowest part of the base (B) and the locking casters (E) to the widest part of the base. Rotate clockwise until securely tightened.
-
Adjusting Workstation Height
5A. Press down on pedal (A) and manually pull or push workstation top (C), either up or down, to adjust desired height.
-
Attaching Counterbalance Monitor Arm Component
6A. See included ADD-DMCG manual for more detailed instructions and features.
-
Attaching Articulating Monitor Arm
7A. See included ADD-GCADM manual for more detailed instructions and features.
Caution
Please be sure to fasten all the screws securely before using. Failure to do
so may compromise integrity.
36 Taaffe Place Brooklyn, NY 11205 support@ctadigital.com 888-733-4448 www.ctadigital.com