SVEN SB-2200D Soundbar With Wireless Subwoofer User Manual

SVEN SB-2200D Soundbar With Wireless Subwoofer

Product Information

Product Usage Instructions

1. Caution! High voltage inside! To avoid the risk of electric shock, do not open or touch elements inside.

2. Soundbar Control Panel:

   • POWER/MODE: Long press to power on/off; short press to select MSS mode.

   • BT: Short press to select Bluetooth mode; long press to disconnect from Bluetooth source in Bluetooth mode.

   • VOL-: Short press to decrease volume; long press to play the previous track in Player and Bluetooth mode.

   • : Play/Pause button (short press in Player and Bluetooth mode);
     MUTE in AUX/OPT/HDMI(ARC) mode (short press).

   • VOL+: Short press to increase volume; long press to play next
     track in Player and Bluetooth mode.

   • USB: Port for a USB flash device containing 3 audio files.

   • OPT: Optical input.

   • HDMI(ARC): HDMI input.

   • AUX IN: Jack to connect linear input.

   • DC IN: Power cable connection jack.

3. Remote Control:

   • 3D: 3D mode.
   • USB: MP3 player mode switch-on button (playing MP3 files from a USB flash device).
   • HDMI ARC: HDMI ARC input selection button.
   • : Repeat mode selection button (in Player mode).

4. Battery Installation: Install batteries in the remote control. Direct the remote control to the infrared receiver on the subwoofer within a distance of no more than 7 meters. If the remote control does not operate, check the batteries or replace them if discharged. Remove the batteries if not using the remote control for a long time (more than one week).

5. Preparation and Operation:

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm that carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up on the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Do not switch on the speaker system immediately after you bring it into a room from an environment with a negative temperature! After unpacking, the speaker system should be kept in conditions of room temperature for at least 4 hours.
• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

PACKAGE CONTENTS

• Subwoofer — 1 pc
• Soundbar — 1 pc
• Remote control (RC) — 1 pc
• AAA type batteries — 2 pcs
• Mini-jack to mini-jack signal cable — 1 pc
• Optical cable — 1 pc
• 3.5 mm jack — 2xRCA аdapter — 1 pc
• Power adapter — 1 pc
• Power cable — 1 pc
• Wall-mounting set — 2 pcs
• User manual — 1 pc
• Warranty card — 1 pc
• Mounting guide — 1 pc

SAFETY PRECAUTIONS

Caution! High voltage inside! To avoid the risk of electric shock do not open or touch elements inside.

• To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and repairs should be performed only by qualified specialists in an authorized service centre.
• The list of authorized service centres is available on www.sven.fi.
• Do not put foreign objects inside the holes of the MSS.
• Protect the MSS from high humidity, water and dust.
• Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose it to direct sunlight.
• Do not place any open flame sources on MSS.
• Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When operating the MSS, do not put any devices on it, do not cover it with cloth or other objects preventing it from cooling.
• Do not use any chemical agents for cleaning. Clean it with a dry soft cloth only.

TECHNICAL DESCRIPTION

SB-2200D soundbar with a wireless subwoofer provides virtual surround sound. The device is designed for playing music and sounding games, movies, etc. The soundbar is equipped with a built-in power amplifier and tone control, compatible with TVs (ARC) and DVD/Media players. Remote control is included. Has a built-in LED display, Bluetooth module, optical input and audio player with USB flash.

Special features

• Support of Dolby Digital multichannel digital sound system
• Wireless signal transmission via Bluetooth
• Wireless soundbar connection with subwoofer
• Digital HDMI (ARC)
• Digital optical Input
• Ability to control the soundbar using the TV remote control (HDMI CEC)
• Remote control
• Wall mountable soundbar
• USB-flash playback support
• LED display
• Wooden casing of subwoofer (MDF)
• The control panel on the top panel of the soundbar

Upper and rear soundbar controls

1. POWER/MODE: power button (long pressing); the MSS mode selection (short pressing).
2. BT: Bluetooth mode selection (short pressing); disconnecting from the Bluetooth source (long pressing in Bluetooth mode).
3. VOL-/ : volume decrease button (short pressing); previous track (long pressing in Player and Bluetooth mode).
4. : Play/Pause button (short pressing in Player and Bluetooth mode); MUTE in mode AUX/ OPT/HDMI(ARC) (short pressing).
5. VOL+/ : volume increase button (short pressing); next track (long pressing in Player and Bluetooth mode).
6. USB: port for a USB flash device containing МР3 audio files.
7. OPT optical input.
8. HDMI(ARC): HDMI input.
9. AUX IN: jack to connect linear input.
10. DC IN: power cable connection jack.

Remote control

1. : POWER button.
2. : Sound off/on button.
3. TREBLE-/+: HF volume control.
4. BASS-/+: Bass level up/down.
5. +: Volume increase button.
6. : Previous track in Player and Bluetooth mode.
7. : Play/Pause in Player and Bluetooth mode.
8. -: Volume decrease button.
9. : Next track in Player and Bluetooth mode.
10. MODE: Source selection.
11. BT: Bluetooth mode selection; disconnecting from the Bluetooth source (long pressing in Bluetooth mode).
12. AUX: AUX input selection button.
13. OPT: OPT input selection button.
14. EQ: EQ mode switch (short pressing); Return to default settings (long pressing).
15. 3D: 3D mode.
16. USB: MP3 player mode switch-on button (playing MP3 files from a USB flash device).
17. HDMI ARC: HDMI ARC input selection button.
18. : Repeat mode selection button (in Player mode).

BATTERY INSTALLATION

• Open the battery compartment on the back of the remote control.
• Insert the included AAA batteries (including, observing polarity).
• Close the battery compartment.
• Notes. Use the RC at an angle no more than 30° at a distance of no more than 7 meters. Direct the remote control to the infrared receiver on the subwoofer. If the remote control does not operate, check the batteries or replace the discharged batteries with new ones. Remove the batteries from the RC if you don’t intend to use it for a long time (more than one week).

PREPARATION AND OPERATION

Installation of the system

• The soundbar is delivered in assembled form. A wireless subwoofer emits a non-directional sound, so it can be placed anywhere in the room in which the subwoofer will sound best. Installation completed.
  Note: If necessary, the soundbar can be hung on the wall under the TV set using the wall mount set (installed on the soundbar). MSS сonnecting and control

• SB-2200D soundbar with a wireless subwoofer can be connected to virtually any audio source:

• DVD player, TV, PC, laptop, etc. (see connection diagram in Fig. 4).

• To connect the speakers to a PC, TV, mobile devices, etc., use the mini-jack signal cables to the minijack (included).

• To connect Speaker System to the PC and TV use an optical cable (included).

• Connect the power cable with the power adapter (included). Then connect it to the DC IN j jack (10) of the soundbar (see Fig. 4).

• Connect the subwoofer power cable to the main outlet.

• Connect the power adapter to the main outlet. The power LED on the front control panel will light up. Then switch on the subwoofer with the POWER switch (ON position) on the subwoofer rear panel.

• To switch on the soundbar, press the button (1) on the control panel or the button (1) on the remote control. To switch the soundbar off, press the Standby mode button again.

• At the first turn on, the soundbar and subwoofer will automatically establish a connection between themselves. As soon as the connection is installed, the LED on the rear panel of the subwoofers will change the light from intermittent to permanent*.

• Select the signal source.

• Adjust the master volume with the (5) and (8) buttons on the RC.

• Select the equalizer option, by pressing the (14) button on the RC.

• After using the MSS, mind switching it off using the button (1) on the RC, switch off the subwoofer using the POWER switch (OFF position) on the subwoofer rear panel and unplug the power adapter from the socket.

Player mode

• The system will automatically switch to the Player mode if you install a USB flash in the slot (6) to use the (1) button on the top panel or the (16) button on the remote control. The selected mode is displayed on the LED display. Playback starts automatically.

Bluetooth mode

• To transmit a signal in this mode, at first connect the device to the signal source (see Fig. 6).
• To do this, select the Bluetooth mode using the (2) button on the top of the soundbar or the (11) button on the remote control. The MSS switches to the search mode, and the display displays “BT”.
• It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). “SVEN SB-2200D” message will be displayed on the screen which is to be connected to**.
• If the connection is successful, the “BT” indicator has a steady glow. If the connection fails, the “BT” indicator is intermittent. It is necessary to re-translate the system into the search mode (turn it off and on again) ***.
• Note. When watching streaming video, the audio track may lag behind the image. This is not a malfunction but is due to the technical capabilities of the source and receiver Bluetooth chips. To eliminate this desynchronization, it is recommended to use an HDMI (ARC) connection, an optical or signal cable with an audio source.
• Due to the constant development of the software, the actual MSS operation may differ from that described in this manual. The most recent version of the manual is available at www.sven.fi.

Wireless Subwoofer connection

• NOTE: After turning on the soundbar and subwoofer, it will automatically connect, if not, please follow the below steps to connect manually:
• A. Power on the Soundbar and subwoofer, the LED on the rear of the subwoofer will flash, and switch the Soundbar to BT mode. Pay attention to: At this stage, do not connect any devices (such as mobile phones, or tablets) to the soundbar.
• B. Holding the Play/Pause ( ) button for more than 3 seconds, the display will show “pair”, after connecting successfully, the soundbar will have voice prompts “du”, and the LED on the rear of the subwoofer keeping light. The first connection should take about 10 seconds.
• You might have to enter the “0000” code to connect some models of devices via Bluetooth.
• If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose the item name “SVEN SB-2200D” and the “connect” command on the source.

TROUBLESHOOTING

Check the connection.
The power adapter is not connected.| Connect the power adapter.
No sound or the sound is too quiet.| The volume level is set at a minimum value.| Adjust the volume control knob.
Improperly connected audio source.| Connect the audio sources correctly.
Distortion of sound.| The large amplitude of the input signal.| Turn down the source volume and the MSS volume.
The remote control is not working.| The battery is discharged.| Replace the battery with a new one.
The audio track lags behind the image in Bluetooth video streaming mode.| Technical limitations of the Bluetooth chipset.| Use an audio connection via HDMI (ARC), an optical cable, or a signal cable.

If none of the above methods can solve the problem, please seek professional advice at your nearest service centre. Never attempt to repair the product yourself.

TECHNICAL SPECIFICATIONS

180

2 × 60

Rated current consumption, A: soundbar subwoofer| 0.03

0.06

Frequency response, Hz: soundbar subwoofer| 50–150

150–20 000

Speaker diameter, mm: soundbar subwoofer| Ø 52

Ø 190

Voltage supply, V/Hz| ~230/50
Dimensions, mm: soundbar subwoofer| 900 × 70 × 101

240 × 420 × 243

Weight, kg| 7.6

Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Model: SB-2200D
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.
Model: SB-2200D

• Importer in Russia: Regard LLC, 105082,
• Moscow, st. Friedrich Engels, 75, p. 5.
• Authorized organization in Russia:
• RT-F LLC, 105082, Moscow, st. Friedrich Engelsa, 56, building 1. For warranty terms service, see the warranty sheet
• Lone or on the website www.sven.fi. Guarantee- term: 12 months. Service life: 2 years.

CONTACT

Manufacturer: SVEN PTE. Limited”, 176

• Joo Chiat Road No. 02-02, Singapore 427447.
• Produced under the supervision of Sven Scan
• Dinavia Limited”, 48310, Finland,
• Kotka, Kotolahdentie, 15. Made in China.
• Manufacturer: SVEN PTE. LTD, 176 Joo Chiat
• Road, No. 02-02, Singapore, 427447.
• Produced under the control of Oy Sven Scandinavia
• Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.
• ® Registered Trademark of Oy SVEN
• Scandinavia Ltd. Finland.
• www.sven.fi.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>