Ingersoll 1892 Michigan Automatic I01103B Instructions
- June 13, 2024
- Ingersoll
Table of Contents
1892 Michigan Automatic I01103B
IC003
Instructions / Guarantee
Battery precautions
- Do not use rechargeable batteries.
- Use only alkaline AA batteries of the same or equivalent type.
- Insert batteries with the correct polarity.
- Keep batteries away from children.
- Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.
- Avoid short circuiting the contacts in the battery compartment and battery terminals.
- Remove batteries from the unit if it will not be used for a long period of time.
- Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause damage to the clock.
Battery installation (Image 1)
Install 2 x AA (1.5V), observing the correct polarity, into the battery
compartments located on the back of the clock, as shown in the diagram.
Time setting (Image 1)
Turn the TIME SET knob on the back of the clock in the direction of the arrow
until correct time is shown.
Note: The seconds hand is not adjustable.
Guarantee
2 year guarantee against material and workmanship defects (except battery).
The guarantee is valid in those countries where the clock is officially being
sold.
Broken or cracked lens screens are not covered under the guarantee.
WARNING! This product is covered by the Waste Electrical and Electronic
Equipment (WEEE) directive.
It should not be discarded with normal household waste but taken to your local
collection centre for recycling.
This product conforms to the EMC requirements as per council directive
2014/30/EU.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>