CTA PAD-2VDMB Dual Universal Security Enclosure Desk Mount Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-2VDMB Dual Universal Security Enclosure Desk Mount
CONTENTS
INSTALLATION
- Mounting Setup
- Setting Up Enclosures
- 2A. Align VESA holes of CTA’s enclosure (K) with one set of the desk mount (A) VESA holes in landscape orientation. Using the included Allen key tool (F), rotate in screws (C) while holding the hex nut (D) on the back side until securely tightened. Repeat the process for the other set of VESA holes and other enclosures.
- Setting up Cable Routing and Access to the Back Storage Area
- 3A. Unlock the back storage area using the keys (G). Fish through the holes in your cable as shown into the back storage area. Either ish though the holes at the bottom if required or even connect to any small charging items, device or accessories as needed that can fit into the space.
- Setting up Tablet Enclosure Interior Foam Adapters, Sheet Adapters and Security
CONTACT
- 36 Taffe Place Brooklyn, NY 11205
- support@ctadigital.com.
- 888-733-4448
- www.ctadigital.com.
- PAD-2VDMB/ PAD-2VDMW
Dual VESA Security Enclosure Desk Mount w/ Storage Compartment (Black / White)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>