iSound DGHP-5701 Stereo Earbuds with Microphone User Manual
- June 4, 2024
- iSound
Table of Contents
iSound DGHP-5701 Stereo Earbuds with Microphone
PACKAGE CONTENTS
- EM-110
- Tangle-free Carrying Case
- S/M/L Silicone Tips
- User Guide
- Warranty Card/Registration Card
TECHNICAL SPECIFICATIONS
- Driver Unit: Ø8mm.6u
- Sensitivity: 98dB/1mW (S.P.L at 1 KHz)
- Impedance: 16
- Frequency Range: 20Hz – 20 kHz
- Rated Power: 3mw
- Power: 10mw
- Cable: 20m±0.03m
- Plug: Ø3.5mm
HOW TO USE THE EM-110 EARBUDS
- Turn down your audio device to the lowest level.
- Place the earbuds firmly in each ear until they fit comfortably.
- Raise the audio to a comfortable volume.
- To answer a call, press the phone button once. To end a call, press the phone button again.
NOTE: For compatible devices, the phone button can be used as a PLAY/PAUSE button. Other functions such as Next Track/Previous Track/Fast Forward/Rewind may be possible by Pressing/holding the phone button. Some functions may require multiple presses.
SAFETY WARNING
- Do not listen at a high volume level. Extended high volume levels can lead to permanent hearing loss.
- Start with setting the volume level at the lowest volume and adjust until you reach a comfortable volume level.
- Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking, or jogging where traffic is present and accidents may occur.
- Does not use while sleeping as accidents may occur?
- If you experience any ringing in your ears, try lowering the volume. If the ringing persists, visit your physician.
Frequently Asked Questions
How do you utilize the in-ear microphone?
Connect your headphones to the mixer’s mic input to utilize them as a microphone. Make sure the mic levels are all the way down, speak into the microphone, and then raise them as necessary. Reduce the lows to lessen your voice’s booziness and boost the highs if the mixer or controller offers EQ adjustments.
How are wired headphones wrapped?
Place your middle and ring fingers underneath the headphone plug. With the other hand, begin wrapping the cord around your pointing fingers, crossing it each time in the middle.
What distinguishes wired from wireless headphones?
Wired headphones receive analogue impulses, which have a higher data capacity than Bluetooth signals. Widely accessible wired headphones can be used with any audio device that has a 3.5mm input.
How much battery life is wired headphones capable of?
Life of Battery:
In some situations, battery-operated wired headphones let you listen to music
while blocking out background noise. These headphones typically require two to
four AA or AAA batteries. There are other corded headphones that use
rechargeable batteries.
Can you wirelessly connect wired headphones?
A Bluetooth headphone converter is the quickest and least expensive way to wirelessly connect wired headphones to a Bluetooth device without a socket. Good Bluetooth headphones include more features, like controls and a microphone, than do these headphone adapters.
Does the microphone on my earbuds work?
When using genuine wireless earbuds, the microphone is typically located in the right earpiece.
How are wired headphones wrapped?
Place your middle and ring fingers underneath the headphone plug. With the other hand, begin wrapping the cord around your pointing fingers, crossing it each time in the middle. As a result, the cord will wrap around each finger uniformly.
Do wired headsets have better microphones?
Headphones that are wired frequently have better audio quality because they transmit analogue sound impulses rather than digital ones.
How can I keep my wired earbuds from breaking?
Jack must continue to be unplugged.
Buy a case for your headphones.
Use the Correct Cable Length.
By no means pull the cable.
Avoid sitting with your headphones in.
The water is the adversary.
Most definitely, Quality.
Shrink wrap can be used as additional support.
Do you need to charge wired headphones?
I’ve never encountered any wired headphones that needed a battery, at least not one. Instead of an internal amplifier, the connected source powers the speakers.
Why do wired earphones break so easily?
Headphones break quite readily because we mistreat them and use them so regularly. They are exposed to the backs of aeroplane seats, the bottom of your rucksack, the sun, and the rain. As a result, don’t discard your favorite pair just because they are broken. Check to see if you can fix them first.
If wired headphones aren’t powered, what happens?
Electricity is supplied by the object into which wired headphones are inserted. Headphones are actually tiny speakers. When they are plugged into a device, the audio jack powers the headphones by turning audio waves into electricity.
Are wired headphones musically better?
You normally won’t notice much of a difference in sound quality between wireless and wired headphones if your music is in MP3 format, but if it is in ALAC/FLAC/WAV format, the changes might be more noticeable. In general, tethered headphones provide better sound quality than wireless headphones.
How safe are wired headphones?
The vast majority of scientific evidence shows that the radiation from both Bluetooth and wired headphones is safe.
What can I do to protect my headphone jack?
A brief length of self-adhesive fabric tape should be wrapped around the earphone jack’s neck (or velcro). Make sure you leave a long enough piece of fabric tape exposed while taping it down so that it stays in place.
For gaming, are iSound EM-110 wired headphones preferable?
The iSound EM-110 offers better sound quality.
But gamers frequently choose wired headphones since there are fewer chances of
signal loss or interference. Additionally, direct audio transmission reduces
latency across the connection. For gaming, wired headphones in the same price
range will sound better than their wireless counterparts in terms of audio
quality.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>