ISOUND-5464 DuraWaves Bluetooth Speaker (black) User Guide

ISOUND-5464 DuraWaves Bluetooth Speaker (black)

**Includes

**

• DuraWaves
• charge cable
• audio cable
• suction cup and user guide

Charging DuraWaves
(3.7V 800mah rechargable built-in ba_ery)

Charge DuraWaves with the included USB charge cable. Plug one end into the rear of DuraWaves and the other end into a powered USB port like on a computer

NOTE: A red LED indicator turns ON during charging and turns OFF after fully charged. For optimal ba_ery maintenance, please unplug the USB cable after fully charged. A red LED indicator also lights up when power is low (<21%). It is accompanied by a charge indicating sound. If you need a USB AC adapter or car charger, please visit www.isound.com and search for item numbers: ISOUND-2102 or ISOUND-2104.

Playing music via Bluetooth mode

1. Make sure that DuraWaves is charged.

2. Turn DuraWaves on by pressing the power bu_on. An LED will _ash red and white, indicating pairing mode.

3. Follow the instructions for pairing that came with your Bluetooth enabled device. You may have to go into your se_ings and turn Bluetooth ON. Make sure your device is discoverable or in search mode.

4. Your device should discover “DuraWaves.” Select this profile a password is required, type “0000.”
   NOTE: Once you are paired, the LED will illuminate solid white.

5. You are now connected and can play your audio content wirelessly! Using the speakerphone function With the built-in microphone, DuraWaves can be used as a speakerphone when you are connected via Bluetooth. When connected via AUX, your phone will act as the microphone and you will hear your caller through the DuraWaves speaker.

6. When a phone call comes in, answer it as you normally would on your phone, or press the hands-free button on DuraWaves.

7. Your caller’s voice will play through DuraWaves.

8. When your call is over, hang up as you normally would on your phone or press the hands-free button.

Connecting via audio cable

1. Make sure DuraWaves is charged.

2. Turn DuraWaves on by sliding the power switch at the top left.

3. Connect one end of the included 3.5mm audio cable to the “AUX IN” port on the back of the unit. Connect the other end to the 3.5mm headphone jack of your audio device.
   NOTE: Connecting the audio cable will override Bluetooth mode. DuraWaves will automatically switch to auxiliary when the audio cable is connected.

4. Make sure the volume of your audio device and the volume of DuraWaves are both set to medium/low.

5. Play music on your device and slowly adjust the volume to the desired level.

Adjusting the volume
You can adjust the volume on your Bluetooth-enabled device and on DuraWaves.

Using the suction cup

1. Clean the glossy back surface of DuraWaves with a dry cloth.

2. Make sure both the speaker surface and suction cup are free of dirt, dust, and debris.

3. Firmly stick the side of the suction cup without the pull tab onto the back of DuraWaves.

4. Clean the glass surface you wish to stick DuraWaves to.
   NOTE: Only use the suction cup with a clean glass surface. Test the connection to make sure it is secure before leaving the speaker. Do not leave DuraWaves mounted for more than 1 hour.

5. Firmly mount DuraWaves onto your clean glass surface.

6. When you are ready to remove DuraWaves, carefully pull on the pull tab to release the suction.

Water Resistant Information & Warnings IPX4 Water Level Rating

The iGlowSound Tower cannot be fully submerged under water, but is resistant to water splashed _om any direction. To ensure the iGlowSound Tower is prepared for use against splashing water, remove all cables and tightly close the rubber piece that protects the charge port and AUX port, otherwise water may seep into these ports and damage the speaker.

Troubleshooting

Issue: The sound is low or completely silent.
Solution: Try the following:

• Make sure both your audio device and DuraWaves are charged.
• Make sure the connection (either AUX or Bluetooth) is fully functioning and secure. If using AUX IN, be sure the cable is free of dirt and debris and is securely inserted into DuraWaves and your audio device.
• Make sure the audio cable is not damaged.
• Check that the volume on both your audio device and DuraWaves is turned up to at least medium.
• Confirm that your audio device is playing music.

Issue: Bluetooth will not connect
Solution: Try the following:

• Please consult the user guide of your Bluetooth enabled audio device for instructions.
• Make sure that both your audio device and DuraWaves are discoverable and in search mode.
• Try rebooting the speaker by turning it o_ then back on.
• Make sure someone else is not already connected to DuraWaves

Important safety precautions

• Incorrect use or incompatibility with your device may result in reduced battery performance or damage to your device.
• Do not a_empt to disassemble product.
• Store and operate between 32°F – 113°F.
• Do not fully submerge the speaker under water.
• Do not place this product near a heat source or frame.
• Do not throw or shake.
• Do not operate if it has been subjected to shock or damage.
• Do not crush or puncture the battery.
• Recharge the internal battery every 3 months when not in use to keep the ba_ery in best condition.
• Use soft cloth to clean the exterior. Do not use harsh chemicals or strong cleaning solvents.
• The internal battery must be recycled or disposed of properly. Contact your local waste management office for information on the proper disposal or recycling.

FCC information

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o_ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference that may cause undesired operation.

Modifications not authorized by the manufacturer may void the user’s authority to operate this device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmiffer must not be co-located or operating in conjunction with any other antenna or transmiffer.

Warranty information

All dreamGEAR/i.Sound products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability and compatibility. It is unlikely that you will experience any problem, but if a defect should become apparent during the use of this product, dream GEAR warrants to the original consumer purchaser that this product will be free from defects in material and workmanship for a period of 120 days from the date of your original purchase. If a defect covered by this warranty occurs, dreamGEAR, at its option, will repair or replace the product purchased at no charge. If a replacement is necessary and your product is no longer available, a comparable product may be substituted at the sole discretion of dreamGEAR. This warranty does not cover normal wear and tear, abusive use or misuse, modi_cation, tampering or by any other cause not related to either materials or workmanship. This warranty does not apply to products used for any industrial, professional or commercial purposes.

Service information
For service on any defective product under the 120-day warranty policy, please contact Consumer Support to obtain a Return Authorization Number.

NOTE: dreamGEAR will not process any defective claims without a Return Authorization Number.

Consumer support hotline
877-999-DREAM (3732) (U.S. and Canada only) or 310-222-1045 (International)

Consumer support email support@dreamgear.net

Websites
www.isound.com | www.dreamgear.com

Save a tree, register online dreamGEAR/i.Sound is making the eco-_iendly choice to have all products registered online. This saves the printing of physical paper registration cards. All the information you need to register your recent dreamGEAR/i.Sound purchase is available at: www.dreamgear.com /product-registration

FAQs

Are iSound Bluetooth speakers real?****

Product details. The iSound Fire Waves Bluetooth Speaker has an aluminum housing that is portable, small, and quite stylish. It produces sound that is crystal clear and has surprisingly powerful bass. Any audio device that supports Bluetooth can use the speaker.

How do I stop a Bluetooth connection?****

·       Terminating the BLUETOOTH connection (After use)
·       Turn off the BLUETOOTH function on the BLUETOOTH device. …
·       Turn off the BLUETOOTH device.
·       Turn off the speaker.
·       Touch the NFC-compatible device on the speaker again (if your device has the NFC function).

How do I use my Bluetooth speaker to hear?****

A Bluetooth speaker and a Google Nest or Home device need first be paired and connected.
1.     1.Make sure your Bluetooth speaker is turned on and in pairing mode in step.
2.     Launch the Google Home application.
3.     Verify that you are in the appropriate residence.
4.     Tap and hold the tile on your device.
5.     Tap Settings in the top right corner.
Select the default audio device.

How are speakers that are wireless powered?****

Yes, the majority of wireless speakers plug into standard power outlets or power strips using AC adaptors.
To become “truly wireless,” some systems employ rechargeable batteries, although this feature necessitates repositioning and charging as routine tasks in order to use this type of surround soundsystem.

How does using Bluetooth speakers with TV work?****

Using the remote, choose Menu > Settings > Network > Bluetooth to activate Bluetooth if your TV has it. then decide whatever device you want to connect (your device needs to be in pairing mode for it to appear on the list of available devices).

An vibration speaker is what?****

A vibration speaker, also known as a “whispering window,” “store window speaker,” or “vibration surface speaker,” is a type of surface speaker that uses resonant surfaces to produce music, sound effects, and crystal-clear voice communication.

How are iSound speakers recharged?****

Connect the cable’s USB A end to a powered USB port on a computer, laptop, or USB AC adapter (not included). 4. The speaker’s top-mounted LED indication light will become orange. The LED Page 6 indication light will change to blue when the speaker is completely charged.

Does Bluetooth reduce sound quality?****

To function, Bluetooth relies on compression, which eliminates portions of the audio stream that are judged superfluous. Similar to this, MP3s eliminate the frequencies that are inaudible to human hearing.  The change in sound quality will therefore be scarcely audible to most listeners.

Are Bluetooth speakers as good-sounding as wired ones?****

Despite what audiophiles may claim, the primary benefit of wired speakers has nothing to do with sound quality. No, control is the largest benefit. Simply put, compared to wireless speakers, wired speakers provide you more control over the subtler nuances of the music.

Are Bluetooth speakers as good-sounding as wired ones?****

Despite what audiophiles may claim, the primary benefit of wired speakers has nothing to do with sound quality.  No, control is the largest benefit.  Simply put, compared to wireless speakers, wired speakers provide you more control over the subtler nuances of the music.

What impacts the quality of Bluetooth?****

The sound quality—and your daily enjoyment of your audio equipment—is vastly more influenced by the acoustical tuning of the speaker or headphone drivers and enclosure, as well as the tuning of the device’s digital signal processor, than by the Bluetooth codec.

Power is required by wireless speakers?****

Like wired speakers, wireless speakers also need power. The relationship to power, however, can appear very differently. Wireless speakers can use a tiny AC power line, batteries, or can be charged before use, as opposed to wired speakers, which connect to their source of power through a long connection.

Do Bluetooth speakers generally require charging?****

Overall, adding wireless speakers to your home music system might be a terrific choice.  The majority of speakers won’t be completely wireless and will require a power source to function.  Even totally portable systems occasionally need to be recharged.

Does Bluetooth pose a security threat?****

It’s common knowledge that Bluetooth poses security risks, including the potential for malware to escalate and run on phones. strongly advise speaking with cybersecurity professionals—or even a doctor

If Bluetooth is left on, what happens?****

From hands-free phone calls to wireless file sharing to listening to music on a car’s speakers, Bluetooth technology offers ease. However, having your Bluetooth on all the time can be risky, and hackers are taking advantage of the technology to spread harmful software, access sensitive information, and more.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>