adidas RPD-01 Wireless Bluetooth Sport Headphones User Guide
- June 13, 2024
- adidas
Table of Contents
RPD-01 Wireless Bluetooth Sport Headphones
User Guide
RPD-01 Wireless Bluetooth Sport Headphones
QUICK START GUIDE
GET STARTED
- Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode.
- Open the Bluetooth® list on your phone and select adidas RPD-01.
- Go to your favorite audio app and press play.
Get the adidas headphones app to activate more features, configure the action button and complete the setup.
TWIST FIT SYSTEM
The ear tips and the optional silicone ear wings come in 4 different sizes
that can be combined for a perfect fit.
The ear wings ensure that the headphones sit securely in place. If the ear
buds tend to move or fall out, try changing to a bigger ear wing size. The ear
tip size affects the acoustic properties of the headphones.
- To change the size, first remove the ear tip and then the ear wing by gently pulling them from the headphones.
- Attach the new ear wing by stretching it into place and making sure that the holes on the ear wing and ear bud line up.
- Fasten the new ear tip on the ear bud. The ear tip is oval and should match the orientation of the ear bud.
CONTROL BUTTONS
Use the control buttons on the right side to control audio, start Bluetooth ® pairing mode and turn your headphones on or off.
- Press middle button for 2 seconds to turn on or off
- With your headphones turned off, press middle button for 4 seconds for Bluetooth pairing
- Press upper or lower button to change volume
- Press middle button to play or pause audio
- Double or triple press middle button for previous or next track
- Double or triple press and hold middle button to rewind or fast forward
- Handle calls:
- Press middle button to answer or end call
- Double press middle button to reject an incoming call
USING THE ACTION BUTTON
Customize the action button behavior from the adidas Headphones app.
Go to SETTINGS and then ACTION BUTTON or tap ACTION BUTTON from the home
screen to get started.
After setup: single, double or triple click the action button on the left side
to access your actions.
For Spotify actions, make sure this app is running on your phone.
A Spotify premium account is required for the Spotify action button feature.
LED INDICATOR
| Blue blinking | Bluetooth® pairing mode – the headphones are ready to be paired |
|---|---|
| White blinking | Powered on, connected to a Bluetooth device and audio paused |
| Red-Orange-Yellow Green | Connected to a power source and battery is charging |
0-100%
Red| Powering off or disconnecting from a Bluetooth device
CHARGING YOUR HEADPHONES
Use the included USB cable to connect your headphones to a power source. When the LED is green your headphones are fully charged and can play for approximately 12 hours.
WASHING YOUR HEADPHONES
Clean your headphones to keep them fresh and make them last longer.
Note! Never rinse or submerge your headphones.
Do not use any detergents and do not leave your headphones to dry in direct
sunlight.
• Use a wet lint free cloth to gently wipe clean your headphones.
© All rights reserved. adidas, the Badge of Sport and the 3-Stripes mark are registered trademarks of adidas used by Sound Industries International AB under license from adidas AG.
The Bluetooth ® wordmark and logos are registered trademarks owned by the
Bluetooth SIG, Inc.
and any use of such marks by Sound Industries International AB is under
license.