SAFAVIEH TBL9000A Table Lamp User Manual
- June 13, 2024
- SAFAVIEH
Table of Contents
SAFAVIEH TBL9000A Table Lamp
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE
|
DESCRIPTION
|
PICTURE
|
QUANTITY
---|---|---|---
A
|
Lamp base
| ****|
1X
B
|
Lampshade
| ****|
1X
C
|
Harp
| ****|
1X
D
|
Finial
|
|
1X
E
|
A60 Led Bulb,9W
| ****|
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
Step 1
Unpack all parts from cartons carefully Insert the Harp (HW2) into the Saddle
(HW3).
Put the shade(A) on the Harp(HW2), then tighten the Finial (HW1)into the Harp
(HW2)
Step2
Insert the bulb(HW4) into the lamp holder
Step3
Put the light on a level surface to check Insert the Harp (HW2) into the
Saddle (HW3). if everything is stable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>